1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

secondary LAN ip address

Discussion in 'Tomato Firmware' started by rs232, Feb 26, 2011.

  1. rs232

    rs232 Network Guru Member

    Hi, sorry for the stupid question, but I do I add a secondary lan address to tomato?

    I would like it to be reachable via 2 different IP addresses (different subnets)

    I've tried to add a subinterface for eth1 and play with br0 but so far no luck

  2. rs232

    rs232 Network Guru Member

    Appratently a
    ifconfig br0:1
    or whatever the IP you like as secondary, seems to be working.

Share This Page