1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

secure easy setup?

Discussion in 'Cisco/Linksys Wireless Routers' started by joeschmo88, Apr 10, 2006.

  1. joeschmo88

    joeschmo88 LI Guru Member

    so exactly what do i do to enable this? i know i press it but whenever i do that it starts to blink white but then goes back to orange. is that good? my wireless settings shows that SES is negotiating...im confused.
  2. jgutz20

    jgutz20 Network Guru Member

    probably be best to set the router security up with internet explorer, typing in and typing in admin for the password.

    Then goto the wireless tab and give yourself a network name and click on network security and setup WEP or WPA (WPA being the stronger of the 2)

    Then just leave the button alone.. its happy when its glowing orange and not being used
  3. joeschmo88

    joeschmo88 LI Guru Member

    what is this " WPA Shared Key"?
  4. jgutz20

    jgutz20 Network Guru Member

    a type of security, if your computers connecting to the wireless network have XP with SP2 its probably the best choice, WPA is also easier to remember than a hexadecimal password that wep uses
  5. noelabc

    noelabc Network Guru Member

    If the SES light turns orange, it means that there were no SES adapters found. You should also have Linksys adapters that support SES. You can go to http://linksys.custhelp.com/cgi-bin...SZwX3NlYXJjaF90ZXh0PXNlcw**&p_li=&p_topview=1 for more information.

Share This Page