1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Selecting a Wireless AP in Alchemy 1.0

Discussion in 'Sveasoft Firmware' started by Alpha162, Sep 14, 2005.

  1. Alpha162

    Alpha162 Network Guru Member

    Hi, I'm using my WRT54G v2 to connect to another wireless access point for a while now, but recently another ap has popped up.
    this new ap seems to have taken precedence for my router as i can no longer connect to my friends network anymore. Even though the SSID's are completely different, it still wants to keep connecting to the new network.

    Any ideas :cry: ?

    Thanks in Advance, Dave.
  2. Alpha162

    Alpha162 Network Guru Member

    Fixed It.

    Well I fixed my problem, but I thought I'd stick how I done it on here to help anyone else.

    Basically I learnt how to use the Telnet program, logged into my router and scanned for any AP's in the area (just type 'wl scan; wl scanresults' after you've logged in) and then joined the specific one i wanted :thumbup: (For example 'wl join "EnterSSIDHere" ')

    Job Done!

  3. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    Re: Fixed It.

    You can add that command to your rc_startup to connect automatically at startup when powered on our reboot

Share This Page