1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Set QOS for Google Voice

Discussion in 'Tomato Firmware' started by pitcaver, May 28, 2011.

  1. pitcaver

    pitcaver Networkin' Nut Member

    I am certainly a newbie at this :dunce: , so I apologize if the question is elementary. I have used Tomato v1.28 for quite some time with my WRT54GL. Now that I have a brother that lives with me who is a torrent freak, I've been reading up on QOS. The forum is very helpful. I've especially found a few post by Toastman to be extremely helpful :bow:

    So I've basically configured my QOS according to Toastman's recommendations. I was able to figure out how to give my Sprint AIRRAVE device the highest priority class by setting SrcMAC, TCP/UDP, Any Port. I tried several ways to do this and this was the only thing that worked.

    My problem now is I can not figure out how to give google voice a higher class. It is going into the lowest class and doesn't work. Any ideas?

    Thanks in advance :help:
  2. xur17

    xur17 LI Guru Member

    I had success using the L7 rtp-1 and rtp-2 filters.
  3. nricciardi

    nricciardi LI Guru Member

Share This Page