1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Setiing up a VPN between two WAG54G routers

Discussion in 'Other Linksys Equipment' started by ceepan, Jun 10, 2005.

  1. ceepan

    ceepan Network Guru Member


    I am new to the VPN concept. I would appreciate some advice on setting up a VPN between two WAG54G routers at different locations. Both are allocated dynamic IP addresses by the ISPs.

    Could somebody please post instructions on what I am required to do at both sites so that I can access files from PCs on each LAN from the other remote location, i.e. Location 1 has two PC's on the LAN, Location 2 has one PC on the LAN. I want to be at Location 2 and access files from bothe PCs at location 1.

    Thanks in advance,
  2. DocLarge

    DocLarge Super Moderator Staff Member Member


    the below link has information on a router to router setup, but it peratains to the wrv54g. However, minus the wrv54g having a gateway option whereas the wag54g doesn't, all other settings are 98 percent same. Also, there are two screenshots that show you "exactly" how to create a router to router config.



Share This Page