1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Setting up ftp server in Tomato, need help

Discussion in 'Tomato Firmware' started by milky, Dec 13, 2010.

  1. milky

    milky Networkin' Nut Member

    Hi folks, I have tomato Kernel 2.6 (experimental) for MIPSR2 vpn installed on my Asus RT-N16. I have the dlna media server running, and would like to get the ftp server set up and running on the same hard drive. Unfortunately, I have no idea how to set this up. I have my user account setup, but what else do I need to setup in "FTP Server Configuration". I have it setup for WAN and LAN, port 21, "Allowed Remote address", is this where I assign a ftp address? Should I be using my WAN address for my ftp address? Also, do I need to setup port forwarding? Been googling for days now, looking for some setup info, and not finding anything. Looking for a little tutorial, hope someone can help a noob out.
    Regards, Randy
     
  2. milky

    milky Networkin' Nut Member

    I'm assuming, I need to type in my Wan ip address, as ftp://, or do I need to use my Gateway ip? Do I need to add :21 to gain access to my ftp server? Right now I'm just trying to use an internet browser to gain access, have tried Mozilla fire ftp, both with no success.
    Regards, Randy
     

Share This Page