I built a small PC using the Intel D510M0 motherboard; the board has a RealTek 8111DL Gigabit Ethernet Controller on it and I want to set it up to Wake on LAN so I can start it remotely. I made the following settings in the Bios: Wake on LAN from S4/S5 Enabled Power On-Normal Boot: the system will wake from S4/S5 power state when a Wake on LAN packet is received and will follow normal boot order. And the following in the Windows 7 Pro settings for the LAN Adapter: Realtec PCIe LAN Adpater Wake on Magic Packet = Enabled Wake on pattern match = Enabled WOL & Shutdown Link Speed = 10 Mbps First I powered off the PC then from another PC logged into the router and issued the WOL command using the LAN adapterâ€™s MAC address but nothing happened. The PC is on a wired network but it is not attached directly to the router, it is attached to a Linksys EZXS88W switch which is then attached to the router. Can anyone suggest how I might get this to work?