1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

setting up WRT54G and TrendNet TV-IP400 web cam

Discussion in 'Cisco/Linksys Wireless Routers' started by netbean, Aug 14, 2006.

  1. netbean

    netbean LI Guru Member

    Greetings Everyone!

    I set up WRT54G and TrendNet TV-IP400 web cam on a LAN and everything works great, the cam works like a charm and port forwarding works ok on the router.

    The problem is the camera cannot get outside the network and access the outside world to upload its images.

    How do I enable outgoing communication for the cam/network?

    Yes, I'm a noooooooob at this and in desparate need of help.
    Thank you in advance.
     
  2. bl4cknight49

    bl4cknight49 LI Guru Member

    You mentioned that port forwarding is working on the router have you tried using a known working port to forward the camera?
     
  3. netbean

    netbean LI Guru Member

    Here's the set up from the Port Range Forward page:

    App. Start........End......Protocol........IP Address..........Enable
    --------------------------------------------------------------------------------
    http..80...........80........BOTH...........192.168.1.35.......Enabled

    ... the cam is accessible throughout the LAN and works fine but it's not able to FTP it's images to the outside.

    Is this what you were asking about?
     

Share This Page