1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Shibby 116 Asus AC66U: no 80mhz channels

Discussion in 'Tomato Firmware' started by Idan Gazit, Feb 16, 2014.

  1. Idan Gazit

    Idan Gazit Reformed Router Member

    I've made a fresh installation of shibby 116 on a new ASUS RT-AC66U router. I've followed the very helpful youtube video by shibby explaining how to get the 5ghz interface to appear.

    When I configure the 5ghz interface, I get a lovely list of channels when I choose either 20 or 40 MHz channel widths. They seem to work fine—if I choose them and save, I see correct settings back on the overview screen:


    The problem is that I have no available channels when I select 80MHz channel width:


    If I just leave it to "Auto", the changes don't seem to get saved. I see whatever I had before (40MHz, channel 48, like in the screenshot above.)

    I've read every thread I could find on the subject. My region in Advanced->Wireless is set to EU.

    How do I get my router configured to use 80MHz channels— and 1300mbit speeds? :)

    P.S. — Apologies for the sh*tty photos-of-screen instead of screenshots—configuring the router from a computer disconnected from the internet, was the easiest way to get screencaptures.
  2. sa411022

    sa411022 Reformed Router Member

    I think the reason is that the Wireless Network Mode is set to N Only, which does not support 80 Mhz.
  3. Idan Gazit

    Idan Gazit Reformed Router Member


    I tried both Auto, A, and N modes. A restricts the dropdown to 20MHz only. Auto and N both show 20/40/80. In any case I have the same issues if the mode is Auto or N, and I can't choose 80 if it's A.
  4. Connor McCaffrey

    Connor McCaffrey Serious Server Member

    change country to US or Singapore then try. shouldn't happen
  5. Idan Gazit

    Idan Gazit Reformed Router Member

    Perfect, setting to "US" did the trick.


Share This Page