1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Show Browser Icon

Discussion in 'Tomato Firmware' started by RonWessels, Nov 6, 2007.

  1. RonWessels

    RonWessels Network Guru Member

    In Administration -> Admin Access, right under the Color Scheme drop-down, there is a checkbox labeled "Show Browser Icon". What does that do? I tried checking it, but I can't see any difference before and after.

    If it matters, I'm using Tomato 1.11 and Firefox
  2. Macskeeball

    Macskeeball LI Guru Member

    I've wondered the same thing. My guess is that it turns the favicon on or off, but that's just a guess.
  3. Low-WRT

    Low-WRT LI Guru Member

    I have the exact same setup.
    It used to work, but it must be a bug in 1.11.(not a big one, however:) )

    It's supposed to show a little tomato, kind of like how linksysinfo.org shows a little WRT54G.
  4. danix71

    danix71 LI Guru Member

    A small red tomato. :)

    Attached Files:

  5. RonWessels

    RonWessels Network Guru Member

    Thanks. Interesting thing about that: if I talk to the router using IE, the checkbox behaves as you have described and the tomato appears. However, under Firefox, I can't get the tomato to appear no matter what I do.
  6. Low-WRT

    Low-WRT LI Guru Member

    What's even more interesting is mine started working as of yesterday after I posted...must be a Firefox bug.
  7. h3xis

    h3xis LI Guru Member

    I had this problem and I just cleared my firefox cache/cookies/history. After that I restarted firefox and the icon appeared again.
  8. RonWessels

    RonWessels Network Guru Member

    Confirmed. It's clearing the cache that does it. Once cleared, the next page loaded from the router will cause the tomato to appear. Of course, unchecking the box has no apparent effect until the cache is again cleared. But this seems to be a Firefox issue.

Share This Page