1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Single-threaded in Client Mode?

Discussion in 'Sveasoft Firmware' started by redpizza, Dec 1, 2004.

  1. redpizza

    redpizza Guest

    Hi

    I have a WRT54G (192.168.1.1) as a router connected to the internet and a WRT54GS (192.168.1.2) in client mode next to the TV. Attached to the WRT54GS (client) is a TiVo on 192.168.1.200 and a Neuston DiVX player on 192.168.1.201.

    Periodically the connection to the TiVo is lost. I did some testing tonight with 2 windows open on a laptop pinging the client router (192.168.1.2) and the TiVo (192.168.1.200) constantly. Only 1 of the IPs ever gets a reply with the other IP timeing out. Every now and then the other IP replies and the previous then times out. The Neuston does not reply to a ping, but if I turn on the Neuston then both 192.168.1.2 and 192.168.1.200 time out.

    Both routers are running Satori-4.0 v2.07.1.7sv. Why can I only ever ping 1 of the IPs attached to the client router? Is it single threaded?

    Thanks
     
  2. Marsha

    Marsha Network Guru Member

    The documentation is pretty clear that the WRT54 in client mode only supports ONE client.
     

Share This Page