slow wireless connection with wrt54GS-DE

Discussion in 'Networking Issues' started by MEC, Jan 29, 2005.

  1. MEC

    MEC Guest

    Hi All!

    I use the linksys wrt54GS-DE to connect a DVB-C receiver with my computer where a WMP54GS-DE is installed. The receiver is connected with normal cable to port 1 of the router and the PC uses the wireless connection.
    The problem is that I can´t stream from the PC to the receiver - but all works fine if I also connect the PC via cable. For streaming to the PC it interrupts after some minutes for less than a second and works on....(if connected wireless).
    I use Slackware 10 with kernel 2.6.8.1 and installed the PCI-Card via ndiswrapper.
    ifconfig and iwconfig say that:

    root@spunik:~# ifconfig wlan0
    wlan0 Link encap:Ethernet HWaddr 00:0F:66:6D:10:5E
    inet addr:192.168.0.9 Bcast:192.168.0.255 Mask:255.255.255.0
    inet6 addr: fe80::20f:66ff:fe6d:105e/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1454 Metric:1
    RX packets:1003 errors:0 dropped:0 overruns:0 frame:0
    TX packets:7541 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:154700 (151.0 Kb) TX bytes:10724378 (10.2 Mb)
    Interrupt:169 Memory:febfc000-febfdfff

    root@spunik:~# iwconfig wlan0
    wlan0 IEEE 802.11g ESSID:"linksys"
    Mode:Managed Frequency:2.472 GHz Access Point: 00:12:17:07:BF:4E
    Bit Rate:125 Mb/s Tx-Power:25 dBm
    RTS thr:2347 B Fragment thr:2346 B
    Encryption key:eek:ff
    Power Management:eek:ff
    Link Quality:100/100 Signal level:-67 dBm Noise level:-256 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:345 Missed beacon:0

    I tried to disable encryption and changing the channel. And the ping is between 1 and 3 ms...
    Has anybody an idea what is going wrong in my configuration????

    CU
    MEC

    edit> The connection from the receiver to the router is 10Mbit/s and Halfduplex. So there shouldn´t be a problem with the general speed of a wireless connection......
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice