SNMP of Death

Discussion in 'Other Linksys Equipment' started by Highelf, Nov 23, 2004.

  1. Highelf

    Highelf Network Guru Member

    on Sunday I was able to
    snmpwalk -v 2c -c public
    my WAG54G with a lot of answer (after having activate snmp in the 1.02.7 firmware). As of today, I can kill my WAG by typing the same line. All I get is the beginning of the answer:
    highelf@arrakis:~> snmpwalk -v 2c -c public
    SNMPv2-MIB::sysDescr.0 = STRING: Wireless-G ADSL Gateway
    SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.3955.1.1
    SNMPv2-MIB::sysUpTime.0 = Timeticks: (11425) 0:01:54.25
    SNMPv2-MIB::sysContact.0 = STRING: Linksys
    SNMPv2-MIB::sysName.0 = STRING: Linksys WAG54G
    SNMPv2-MIB::sysLocation.0 = STRING:
    SNMPv2-MIB::sysServices.0 = INTEGER: 4
    IF-MIB::ifNumber.0 = INTEGER: 3
    IF-MIB::ifIndex.1 = INTEGER: 1
    IF-MIB::ifIndex.2 = INTEGER: 2
    IF-MIB::ifIndex.3 = INTEGER: 3
    IF-MIB::ifDescr.1 = STRING: K32_MAC
    IF-MIB::ifDescr.2 = STRING: SAR_ADSL
    IF-MIB::ifDescr.3 = STRING: WLAN
    IF-MIB::ifType.1 = INTEGER: ethernetCsmacd(6)
    IF-MIB::ifType.2 = INTEGER: fast(125)
    IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
    IF-MIB::ifMtu.1 = INTEGER: 1500
    IF-MIB::ifMtu.2 = INTEGER: 1492
    IF-MIB::ifMtu.3 = INTEGER: 1500
    IF-MIB::ifSpeed.1 = Gauge32: 100000000
    IF-MIB::ifSpeed.2 = Gauge32: 8000000
    IF-MIB::ifSpeed.3 = Gauge32: 54000000
    IF-MIB::ifPhysAddress.1 = STRING: 0:f:66:da:65:a5
    IF-MIB::ifPhysAddress.2 = STRING: 0:f:66:da:65:a6
    IF-MIB::ifPhysAddress.3 = STRING: 0:f:66:da:73:f1
    Timeout: No Response from
    I could reproduce this 3 times in a row. Everytime the WAg dies, meaning it won't responce to ping or do his job and give me internet access.
    Anyone experimenting this also ? Having WAG-54G-DE and 1.02.7 DE firmware.
    Next question would be about the answer ifSpeed.2 = 800000 wich would mean 8 Mbit ? I this the maximunm DSL speed?
  2. Wild_Weasel

    Wild_Weasel Network Guru Member

    Hi I tried the samething and the router works fine. I've got the same version of code....Interesting!
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice