1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

so I bought the high gain antenna......HELP!!!

Discussion in 'General Discussion' started by Nameless4ever, Jan 23, 2007.

  1. Nameless4ever

    Nameless4ever LI Guru Member

    this must seem like a total noob question but I don't want to break my router.

    I have a WAG54GS and I got a HGA7S high gain antenna to increase signal strength. but however I try I can't get the damn old one off. how am i supposed to do it

    sorry for all the trouble and thanks in advance!! :halo:
     
  2. Esquire

    Esquire Mesquire Staff Member Member

  3. belleekbeetle

    belleekbeetle LI Guru Member

    Hello - I have a similar WRT54GL and also intend fitting a high-gain antenna - can anyone tell me what type of connection I would need to fit onto where the original antenna comes off - thanks.
     
  4. Nameless4ever

    Nameless4ever LI Guru Member

    sorry for not answering for so long. the connectors appear differently but I'm sure I read this antenna works with my modem in the UK Linksys website. here are some pics if they help
     

    Attached Files:

  5. ka9yhd

    ka9yhd LI Guru Member

    Those pictures you have provided is of the non-removable antenna. If you take a close look at the antenna where the hindge is you will see a small coaxial cable inside coming from the router to the antenna.

    Which is the same antenna that is on the WRTSL54GS.

    And to belleekbeetle:

    Look at the above picture that Esquire provided. That is the case design for all of the WRT54G/ GS/ GL routers.
    I have a WRT54GL ver. 1.1 and the antennas do come off, and the connector is a TNC style.
     
  6. GeeTek

    GeeTek Guest

    RP-TNC male is what screws onto the back of the WRT radios. Check this http://www.hyperlinktech.com/ website for all the connector info and products you need.
     

Share This Page