1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Sorry if the topic is not Tomato specific

Discussion in 'Tomato Firmware' started by Kiwi8, Feb 25, 2008.

  1. Kiwi8

    Kiwi8 LI Guru Member

    Sorry if the topic is not Tomato specific, please move it if it isn't.

    My question is, how can I check the flash chip model in the router? Is it possible to check it from the NVRAM values or do I need to open up the router physically?

    Thanks in advance.
     
  2. Toxic

    Toxic Administrator Staff Member

    do you want to know the size of the flash chip or just the make?
     
  3. Kiwi8

    Kiwi8 LI Guru Member

    Basically the make, as I want to know how many write cycles it can support. I know the size of the flash chip already. :)
     
  4. kevanj

    kevanj LI Guru Member

    Dunno if this will help....
    from http://seattlewireless.net/index.cgi/LinksysWrt54g#head-53da9f182cdd1889086712d3710dea0dd6d790c9

    One can obtain lspci output by copying the contents of /proc/bus/pci to a Linux machine and then running lspci with the "-P" switch:

    # lspci -P .
    00:00.0 RAM memory: Broadcom Corporation: Unknown device 0803
    00:01.0 Ethernet controller: Broadcom Corporation: Unknown device 4711
    00:02.0 Ethernet controller: Broadcom Corporation: Unknown device 4713
    00:03.0 Modem: Broadcom Corporation: Unknown device 4712
    00:04.0 USB Controller: Broadcom Corporation: Unknown device 4715
    00:05.0 PCI bridge: Broadcom Corporation: Unknown device 0804
    00:06.0 MIPS: Broadcom Corporation: Unknown device 0805
    00:07.0 FLASH memory: Broadcom Corporation: Unknown device 0811
    00:08.0 Ethernet controller: Broadcom Corporation: Unknown device 4713
    01:00.0 Host bridge: Broadcom Corporation: Unknown device 4710 (rev 01)
    01:08.0 Network controller: Broadcom Corporation: Unknown device 4320 (rev 02)
     

Share This Page