1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Static routing issues

Discussion in 'Networking Issues' started by wdiclo, Jul 5, 2008.

  1. wdiclo

    wdiclo Guest

    Hi, I got a Linsys SGE2000p and want to perform somo intervlan routing. I understand that this devices has that capability, but I'm unable to get to work.

    There is do clear documentacion on this matter. Can any one give a hint on how to get it to work ?
     
  2. ifican

    ifican Network Guru Member

    I took a quick read of the data sheet of that switch and it does not appear to support L3 (routing). Yes it does support vlans (802.1q), which means you can vlan off different ports so they do not communicate with one another but in order to support routing all of those vlans you will need a router and then create a trunk to the router. Unless i missed something and i could have as i just took about 30 second to look at the features, if the switch does not support routing you cannot do with just the switch what you are requesting above.
     

Share This Page