Strange telnet issue with NSLU2 & uNSLUng

Discussion in 'Cisco/Linksys Network Storage Devices' started by dinsyboy, Oct 27, 2007.

  1. dinsyboy

    dinsyboy LI Guru Member

    I am trying to setup my NSLU2 to use Firefly (mt-daap) server and am a Linux newbie, so followed the instructions religiously that come with the ver 6.8 beta of uNSLUng. I managed to flash the firmware following the steps in the readme, rebooted the slug & went to step 3 unslinging to a USB hd. I enabled telnet through the web console and then loading putty started a telnet session. Telnet pulls the following error up:

    telnet 192.168.0.77
    Trying 192.168.0.77...
    Connected to 192.168.0.77.
    Escape character is '^]'.

    NSLU2 login: root
    Password:
    Login incorrect

    The telnet session allows me type the username, but when I press enter to go to the password line, the keyboard is frozen. I have tried telnet via: putty, WIN XP cmd prompt, Vista cmd prompt & MAC OS X terminal console. All have the same problem. I am trying to type the default "uNSLUng" password that I keep seeing everywhere, but every telnet session won't let me!!! IS there something REALLY stupid that I am not doing/should be doing? Please save me from killing myself!

    P.S. I am able to Redboot & reinstall firmware if that helps too.

    Many thanks,

    Dinsyboy
     
  2. dinsyboy

    dinsyboy LI Guru Member

    You tit!

    haha! So I am a newbie, truly spectacular!
    I am so used to seeing the cursor move as you type, so I assumed it wasn't working! Typed the word in anyway (but carefully, as I was sure I had already done this) and it works.

    Right. Sorry about that folks, just shuffle on, there's nothing to see here!
    :tongue::tongue::tongue:
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice