1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Sveasoft upgrade on WRT54 v2 failed! Help needed please!!!

Discussion in 'Sveasoft Firmware' started by Ayala, Aug 9, 2006.

  1. Ayala

    Ayala LI Guru Member

    Sveasoft upgrade on WRT54G v2 failed! URGENT Help needed please!!!

    Hi

    I installed Sveasoft firmware on my WRT54G v2 which as already installed the Thibor firmware, but the upgrade process did failed!
    Now, the power led is blinking and I cannot acces the router anymore!
    I tryed to press reset button for 30 seconds, but I still don't have access to the router neither to the Internet!

    Can anybody help please!!!!!

    thanks in advance
    Ayala
    Lisbon, Portugal
     
  2. Toxic

    Toxic Administrator Staff Member

    try reading the revival guide in the tutorials
     
  3. Ayala

    Ayala LI Guru Member

    thanks for your hint!
    I managed to restore original configuration using tftp -i 192.168.1.1 put firmwarefilename.bin



    Thanks a lot!


    Ayala
    Lisbon, Portugal
     
  4. Toxic

    Toxic Administrator Staff Member

    good. I would use thibor15c as it is about the most stable of 3rd pary firmwares tbh.
     
  5. Ayala

    Ayala LI Guru Member

    I followed your advice and Thibor15c is now installed and the wrt45g is fully operational!

    thanks
    Ayala
    Lisbon, Portugal
     

Share This Page