1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Talisman 1.3 Basic/Mesh Released!

Discussion in 'Sveasoft Firmware' started by Disman_ca, Dec 21, 2006.

  1. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    Looks like there is another firmware version release today. Sveasoft has released Talisman 1.3, both Basic and Mesh builds. Additionally new hardware support has been added for the following devices:

    Linksys WRT350 Gigabit Ethernet model
    Netgear WNR834B Rangemax NEXT model

    Talisman 1.3 Changelog:
    • Add service name field to PPPoE GUI
    • Retitled "Applications & Gaming" to "System Tools"
    • Fix SSH keys issue
    • Fix PPTP passthrough crash bug
    • Fix Backup/Restore issue
    • Add 0 as allowed entry to max wireless clients
    • Add LAN device to QoS devices list
    • Add NAT enable/disable checkbox to Firewall page
    • Fix load-balance issues on VLANs page
    • Fix Repeater mode issues with WPA/WPA2
    • Add Static Host entries to GUI
    • Fix DHCP leasetime reporting bug
    • Fix WRT54GL V1.1 memory timing issues
    • Fix DMZ broken issue
    • Add No-IP.com DDNS support in GUI
    • Add hardware model reporting to Status->Router page
    • Fix router name not added to /etc/hosts file
    • Add VLAN support for WRT300N, WZR-G300N, WZR-RS-G54, WRT350N, WNR834B
    • Fix issues with Gaming QoS aggregate
    • Fix issues with P2P QoS aggregate
    • Fix issues with Audio QoS aggregate
    • Fix PPPoE issue with certain ISPs
    Models supported:
    Asus wl500g
    Asus wl500gd
    Asus wl500gE
    Asus wl500gP

    Buffalotech WHR-G54
    Buffalotech WHR-HP-G54
    Buffalotech WZR-RS-G54
    Buffalotech WZR-G300N

    Linksys WRT54G V1.0
    Linksys WRT54GS V2.0
    Linksys WRT54GS V4.0
    Linksys WRT54GL V1.1
    Linksys WRT300N V1
    Linksys WRT350N

    Netgear WNR834B

    **** Note: For those of you wondering what the mesh version ,is here is a quick list of the features:
    1. Automatic discovery of neighbor mesh nodes
    2. Automatic address assignment among mesh nodes
    3. Automatic routing and route distribution
    4. Automatic distribution of nameservers
    5. Automatic distribution of hostnames
    If you would like to try it out or want more info please go to http://www.sveasoft.com. It should be noted Sveasoft has a yearly support subscription model of $20 which is required before accessing any Talisman firmware images.
     

Share This Page