1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Talisman/Basic 1.2.4 Released!

Discussion in 'Sveasoft Firmware' started by Disman_ca, Feb 3, 2007.

  1. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    Fixes & Updates from the Talisman/Basic V1.2.3 release
    • PPPoE - fixed MTU issues
    • DHCP Client - lengthened timeout to 8 seconds
    • Wireless - SSID broadcast issues fixed
    • Wireless Survey - tuned and expanded
    • ADM6996L - fixed 10 Mb issues with this old Ethernet controller
    • Clone MAC - fixed PC MAC set to zeroes
    • DHCP Server - fixed IP address range
    • VLAN - added to Access Restriction menu
    • Load Balancing - fixed error in interface configuration
    • Loopback - fixed broken firewall when unchecked
    • Backup/Restore - added WVLANs, VLANs, Access Restrictions, Static Hosts
    • WZR-G300N - reset button works now
    • WL500GP - fixed port mapping issue

    This firmware release has been burned and tested live on the following models:

    Asus wl500g
    Asus wl500gd
    Asus wl500gE
    Asus wl500gP

    Buffalotech WHR-G54
    Buffalotech WHR-HP-G54
    Buffalotech WZR-RS-G54
    Buffalotech WZR-G300N

    Linksys WRT54G V1.0
    Linksys WRT54GS V2.0
    Linksys WRT54GS V4.0
    Linksys WRT54GL V1.1
    Linksys WRT300N V1
    Linksys WRT350N

    Netgear WNR834B

    If you would like to try it out or want more info please go to http://www.sveasoft.com. It should be noted Sveasoft has a yearly support subscription model of $20 which is required before accessing any Talisman firmware images.

Share This Page