1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Talismen (dd-wrt pre4)

Discussion in 'DD-WRT Firmware' started by jagboy, Apr 20, 2005.

  1. jagboy

    jagboy Network Guru Member

    hey
    just downloaded the firmware and it looks great. now no one has anexcuse not to download this firmware it supports muli languages.

    thanks briainslyer, Cesar, Duality, and all the others for making this possible
     
  2. XCOM7

    XCOM7 Network Guru Member

    Edit:
    I was wrong pre 4 is out for those who want to brick!
    LMAO
    awesome!
     
  3. XCOM7

    XCOM7 Network Guru Member

    How stable is it for you?
     
  4. aledr

    aledr Network Guru Member

    Where did you download it?
     
  5. jagboy

    jagboy Network Guru Member

  6. jagboy

    jagboy Network Guru Member

    and oh yeah it is pretty stable for me.
     
  7. aledr

    aledr Network Guru Member

    Client mode works fine??
     
  8. jagboy

    jagboy Network Guru Member

    dont know
     
  9. Toxic

    Toxic Administrator Staff Member

    there is a known issue with wireless advance. this is now fixed and a new compile should be replacing the older one.

    note this is an internal version which maybe slightly buggy.
     
  10. jagboy

    jagboy Network Guru Member

    oh well all the pre releases are
     
  11. XCOM7

    XCOM7 Network Guru Member

    Do we have to hard reset before we upgrade?
    I am running 3.2
     
  12. BrainSlayer

    BrainSlayer Network Guru Member

    i'll update the zip file in some minutes. download it in 15 - 20 minutes
     
  13. jagboy

    jagboy Network Guru Member

    no not really
     
  14. Guyfromhe

    Guyfromhe Network Guru Member

    is there a full feature list or some screenshots of the DD interface? everyone seems to be making a big stink about it and i may be bored enough to actually try it out...
     
  15. jagboy

    jagboy Network Guru Member

    try it, there is no real risk in doing so
     
  16. jagboy

    jagboy Network Guru Member

    changelog
     
  17. Guyfromhe

    Guyfromhe Network Guru Member

    i'm too lazy
     
  18. jagboy

    jagboy Network Guru Member

  19. R0B0T

    R0B0T Network Guru Member

    i just downloaded and installed it, seems to be running great, put some stress on it, and it seems to be stable for me aswell,
     
  20. Guyfromhe

    Guyfromhe Network Guru Member

    didn't you install it after hollering about how excited you were?
     
  21. BrainSlayer

    BrainSlayer Network Guru Member

    the zip file is now updated with new features (chillispot) and some bugs fixed. the changelog is updated too
     
  22. Morpheus

    Morpheus Network Guru Member

    Hi i see ther are 2 bin files what is dd-wrt.v22.prefinal4_basic 2.84MB
    :?
     
  23. jagboy

    jagboy Network Guru Member

    here is the updated changelog
     
  24. jagboy

    jagboy Network Guru Member

     
  25. XCOM7

    XCOM7 Network Guru Member

    Read the change log..
    I another words basic is for n00bs
     
  26. jagboy

    jagboy Network Guru Member

    yup
     
  27. Morpheus

    Morpheus Network Guru Member

  28. jagboy

    jagboy Network Guru Member

    will the basic work with tftp because it is under 3mb?
     
  29. Morpheus

    Morpheus Network Guru Member

    I think it will
     
  30. Morpheus

    Morpheus Network Guru Member

    Works well i just flashed it on my WRT :wink:

    PS..Linksysinfo.org seams to be slow today in loading pages
     
  31. jagboy

    jagboy Network Guru Member

    cool now i dont have to download satori for tftp
     
  32. SniperKil

    SniperKil Network Guru Member

    wtf you guys talking about a new interface.. looks the same to me
     
  33. Morpheus

    Morpheus Network Guru Member

    Who is talking abut the interface???? i am not :?
     
  34. aledr

    aledr Network Guru Member

    This version works with WRT54G V3?
     
  35. jagboy

    jagboy Network Guru Member

    it supports more than one language
     
  36. jagboy

    jagboy Network Guru Member

    i have heard of people that wre able to flash talismen (dd-wrt pre4) to the wrt54gv3
     
  37. jagboy

    jagboy Network Guru Member

    maybe you are talking abou the talisman that sveasoft made then yes it is a new interface it is red
     
  38. SniperKil

    SniperKil Network Guru Member

    [​IMG]

    what is that then?
     
  39. jagboy

    jagboy Network Guru Member

    it is not a new interface were did you get from the only thing that changed was the xmit power was added
     
  40. aledr

    aledr Network Guru Member

    I flash it on my WRT54G V3, but I want to now if it will work in client mode...
     
  41. SniperKil

    SniperKil Network Guru Member

    ive never seen this "Sys-Info" screen before, and cannot find it either
     
  42. jagboy

    jagboy Network Guru Member

    ooooooooooooh then go to the mangament page look for "Remote Router Access"

    and under the "Use https:"
    you should see "Info-onStart" enable that

    then go to the routers ip adress and bang it is there
     
  43. SniperKil

    SniperKil Network Guru Member

    ahha there it is.. thanks ;)

    no documentation hurts ;)
     
  44. jagboy

    jagboy Network Guru Member

    ur welcome
     
  45. EnigmaX4

    EnigmaX4 Network Guru Member

    Hey Brainslayer did you fix the afterburner bug for the WRT54GS?
     
  46. micheld

    micheld Network Guru Member

    Great job but:little bugs for chilli.conf on webinterface!

    I can not wait, so i download new firmware and try it.
    Great own options in for chillispot and new version rc3!! Cheers! Thanks!
    I now this is a pre->pre version 4 but i wan to tell this:

    When i save in the webmenu radiusserver1/2
    He do not work i see this "cat /tmp/chilli.conf":
    radiusserver1 (null)
    radiusserver2 (null)
    (same bug in pre 3)

    And i want to use br0 on chilli.conf Now i have a choice to WAN or LAN.
    I think the name WAN = WLAN just only the name. (WAN=internet)
    The new option in this web interface WLAN+LAN end set this to br0.
    I use on my wrt also other AP so i can connect AP to LAN on switch and i then i need the option for dhcpif br0.

    Also vi editor do not work i want to edit chilli.conf but vi do not work!
    /tmp # vi /tmp/chilli.conf
    -sh: vi: not found

    Good job, but little bugs!

    Mies
     
  47. gotamd

    gotamd Network Guru Member

    I'm using pre-final 3.2 and it's AWESOME! I got one of the illicit copies of Alchemy and DD-WRT blows it away with features. The only "problem" I've found with it is QoS scheduling for BitTorrent doesn't work correctly if you set it on "Bulk" (it just stops it entirely). Otherwise...great!
     
  48. R0B0T

    R0B0T Network Guru Member


    i have had the luxery of seeing one WRT54G v3 flashed and flashing one myself, we bricked the first one, and being idiots we didnt understand failsafe mode, but we were still under warrenty so we took it back adn got another one, well i proceed to flash it with the lateest and greastest DD-WRT and well it bricked again, this time i reached like an appifinay of how tftp worked, and what the dmz light status was indicating, so i tried tftping from command but i would receive "server error: incorrect code format"
    or something similar, which told me the router was in a waiting state waitinf for a tftp attemp i rebooted the router so now its back in its waiting state, and since command didnt work i used linksys upgrade softwear and it worked perfectly after the upgrade the light continues to blink untill you attemtp to login through the web browser then it like activates i guess and stops blinking, in anycase i survived the brick but i have not tried putting the version 4 dd-wrt softwear back on the router. just my notes on the problems i have experienced so far with the WRT54G ver 3.0, if any of this helps great if anyone else is having same problem post up!
     
  49. BrainSlayer

    BrainSlayer Network Guru Member

    Re: Great job but:little bugs for chilli.conf on webinterfac

    LAN = br0
    WAN = eth1 (or whatever the interface is on your router)

    for the rest. nice to hear the radius server bug the first time. if i had a notice about it, it would be fixed now
     
  50. dellsweig

    dellsweig Network Guru Member

    Re: Great job but:little bugs for chilli.conf on webinterfac


    THANKS!!!

    Just loaded pre4 onto my gateway router (2.0 hardware) and my wds node (2.2 hardware). Doing some stress testing now - I dont see any problems.

    You have to LOVE Open Source development projects!!!
     
  51. bummpr

    bummpr Network Guru Member

    Re: Great job but:little bugs for chilli.conf on webinterfac

    Brain...I also look forward to the quick fix to make radiusserver1 and radiusserver2 save correctly in the chilli.conf file and also bring back the vi editor.

    Your great work and ability to get things fixed quickly is appreciated by many users out here!!!!! =D>
     
  52. aledr

    aledr Network Guru Member

    So BrainSlayer after these fixes please post an announce on forum!!

    My regards...
     
  53. jagboy

    jagboy Network Guru Member

    this would be appriciated
     
  54. frndrfoe

    frndrfoe Network Guru Member

    dang you crank this stuff out, I am really impressed!
     
  55. viper007

    viper007 Network Guru Member

    cool so fast another version out... thanks... BrainSlayer and team :p

    so any1 have any problem with it so far???
     
  56. jagboy

    jagboy Network Guru Member

    no problems here. yeah brianslyer does bang those firmwares out prety quick :dancing:
     
  57. R0B0T

    R0B0T Network Guru Member

    Memory

    you guys might of noticed earyler i had problems upgrading firmwares i dont know what i was doing wrong but i did everything over again and the firmware upgraded fine, also someone told me that the WRT54G has 32 megs of memory like the GS but that its locked? is there any truth here? and if it is, has it been unlocked with firmware?
     
  58. micheld

    micheld Network Guru Member

    Re: Great job but:little bugs for chilli.conf on webinterfac

    I like this option for interface's choice:
    LAN = vlan0
    WLAN = eth1
    WLAN+LAN = br0

    So with this option you can dd-wrt also use wifi for client mode and put a external AP on the WRT (switch) with chillispot on!
    Also you can wifi disabled and use only LAN (vlan0).

    So you have more nice futures to work with new dd-wrt!

    Micheld
     
  59. devil-strike

    devil-strike Network Guru Member

    Hmm i must see its stable ass hel :D

    i have transfered 40GB over 100Mbit and over 54Mbit without restart our connection drop load avg with 40GB trasnfer 0,15% :D

    Brain keep up the good work,

    ps, whene comes the other web gui or is there no plans for it (srry for my bad english)

    and can som1 fix the activation mail of this forum;
    http://forum.bsr-clan.de/viewforum.php?f=12
    i have me registered but i have no mail for the activation :S
     
  60. viper007

    viper007 Network Guru Member

    haha good.. then 2nite i have things to do liao :p
     
  61. BrainSlayer

    BrainSlayer Network Guru Member

    updated the zip file again. please revisit the changelogs. after some last web changes, the release will be done today

    i added

    http://brainslayer.braincontrol.org/dd-wrt.v22.prefinal4.zip

    please note that i fixed some problems discussed in this thread. that means chillispot interface seleciton for lan,wan,lan+wan
    and the radius server input field works now too.
    additionally you can added user defined settings to the chilli.conf in the admin interface.
    a new interesting feature will also be the possiblity to store the dhcpd client lease db to the jffs2 drive. so you dont loose your dhcpd ip after reboot


    changlogs:
    wireless advanced fixed
    Wireless short/long preamble selection added (thx duality)
    wireless access option added in wireless advanced menu (thx duality)
    chillispot dhcp interface selection (lan,wan,lan+wlan)
    chillispot additional configuration added
    client leases stored to jffs2 added (if enabled)
    multilanguage support for German,Spanish,French,Italian
    web server improved
    several web bugs fixed (thx, Cesar and Duality)
    jffs2 is working now
    firmware splittet in 2 versions.
    basic = does not contain dropbear, chillispot, samba and kaid
    full = all features of the common firmware
     
  62. micheld

    micheld Network Guru Member

    Okay great, i will download this new firmware and test again!

    I will let you now about my test.

    Thanks again for own option and choice interfaces for chilli!!

    Micheld
     
  63. XCOM7

    XCOM7 Network Guru Member

    Possible bug.. Not sure but I am going to list the step we took to flash the firmware and whats going on...
    Ok we Flash to first release of the pre4 nothing was connected to the network not even the Modem....
    It flash flawlesly... Than we just keep waiting for the new rteleases and keep flashing it.. note that the Cable modem is not connected to the router at all..
    Now when we hook it up to the Modem we are unable to get a WAN IP we try it all re flash, release dhcp, renew dhcp, hard reset, soft reset and nothing... than I thought about cloning the MAC of my computer where I have never had to use thes because I use RR. Now after the MAC clone I was able to get an IP but it drops every so often..
    Any ideas why?
     
  64. jlw

    jlw Network Guru Member

    just upgraded it and works great.


    edit:

    I had some problem. I could log in via http. I was just getting ping time outs. But https:// worked. So i reseted the router and http works again. woha :)
     
  65. aledr

    aledr Network Guru Member

    Anynone have succes with the client mode in V 3 of WRT54G??

    I have 8 in front of me... It shows that in Sys-Info that the client is connected, but i can't get ping responses... Please men, I need it.
     
  66. bummpr

    bummpr Network Guru Member

    Need vi

    Brain, we still need the fix to get access vi editor.
     
  67. tieman

    tieman Network Guru Member

    jffs still seems broken, still getting


    Code:
    mkdir: Cannot create directory '//jffs/usr/': no space left on device
    
    got the same thing running 3.2 and 3.3
     
  68. BrainSlayer

    BrainSlayer Network Guru Member

    if you're working on G model, just use the basic version for JFFS support
     
  69. ciscogeek

    ciscogeek Guest

    Survey mode borked

    I just upgraded to DD-WRT #22 prefinal4 (basic) on my WRT54GS v1. The Status -> Wireless -> Survey button locks the router up solid, requiring a reboot.
     
  70. BrainSlayer

    BrainSlayer Network Guru Member

    locks? maybe it takes some seconds, but it never locked here. i tried it some minutes ago
     
  71. tieman

    tieman Network Guru Member

    cool, its working, thanks a bunch
     
  72. t4thfavor

    t4thfavor Network Guru Member

    there is a new version like every 2 days this is sweet.
    i like the updates, keep em coming.
     
  73. TheMunch8

    TheMunch8 Network Guru Member

    Does the improved webserver mean that it fixes the HTTPd problem?
     
  74. frndrfoe

    frndrfoe Network Guru Member

    very minor bug

    From admin page --> reboot router button --> continue button --> goes to /.asp(blank page) instead of back to admin page or any actual page

    note subject: very minor bug
     
  75. BrainSlayer

    BrainSlayer Network Guru Member

    i know. i was to lazy to fix it last evening. i know this bug since many weeks (shame on me)

    about improved webserver:

    i rewrote some file handling parts for faster site building. this affects direct english. the other languages are a little bit slower, since they are translated in realtime. the memory leak is still under investigation (very hard to find) but its one of my highest priority tasks to fix it
     
  76. devil-strike

    devil-strike Network Guru Member

    Meaby i found somthing that leak the memory
    i have yesterday updated the router with your latest dd-wrt
    and i found that snmpd from 2,5% memory to 9.7% memory in just 1 day
    that problem was there never before.

    and have no mrtg or whatever running.

    780K free, normaly is that 1.4MB free
     
  77. TheMunch8

    TheMunch8 Network Guru Member

    I have a problem with this. It keeps disconnecting from the WAN i guess, every so often. This impacts gameplay on a grand scale as every 10-15 minutes, i get dropped from the internet. Any idea what this could be?
     
  78. jagboy

    jagboy Network Guru Member

    it could be your isp. i would call them and ask them if they are having problems. just to rule them out

    you could try another router in the place of your existing router and see that works. if the router that you replaced with the existing router with drops then most likey it is your isp. if it does not then it is your current router.

    you can change the firmware and turn on mac adress clone.

    btw what do you use cable or dsl
     
  79. TheMunch8

    TheMunch8 Network Guru Member

    Heres the full story. I have had to revert to alchemy 5.4 to get it to a time without these disconnects. Any time I change the firmware from that to newer versions, I always get the disconnects, in one form or another. At first it was not giving out new DHCP alotments after a certain amount of time, which i had to reboot the router to reset. Now, it gives out dhcp just fine, but it disconnects me every so often (a watchdog reseting the service?).

    I have Cox High Speed Cable internet. It is definatly the router, as I have plugged directly into the modem and been fine with no disconnects. It seems like it is just in this firmware that i get the random stop of internet.
     
  80. tl511

    tl511 Network Guru Member

    I had the same problem. I loaded the basic version. But, now ssh isn't available. This doesn't make sense to me. Why do I use the basic so I can have jffs2 support but not be able to remote into it to use it! Am I totally confused here? I really need to use ssh for what I want to do with this. How do I have ssh access to the router and jffs2 support?
     
  81. jagboy

    jagboy Network Guru Member

    you need to flash with the full version to get all the fatures that you want, tl551
     
  82. BrainSlayer

    BrainSlayer Network Guru Member

    you can use telnet for that
     
  83. tl511

    tl511 Network Guru Member

    I did flash with the full version. In fact, I'm running it now. The problem is the jffs2 mount is still showing 100% full. I can't put files on it or anything. Also, I noticed that there is no VI or editor with this build. I would really like to be able to edit files on it.

    I really like the DD-WRT web interface, but openwrt is much more flexible. I wish we could have the best of both worlds.

    Also, I tried to telnet to the basic install of version 4 and it wouldn't let me connect either.

    One of the reasons I really want SSH is because I want to use fwbuilder to manage the iptables on the firewall. It uses ssh to install the policy. Of course, it is failing because it can't find iproute (which is really route). Would love to use symlink, but can't write to the thing.
     
  84. Cyberian75

    Cyberian75 Network Guru Member

    How do you set up a static DHCP? I set up a port forwarding, but if the DHCP address changes, it's pretty useless.

    But I don't understand the format...

    Great firmware nonetheless! :)


    Mike
     
  85. Toxic

    Toxic Administrator Staff Member

    it would be something like this....

    Static Allocations: ( Format: IP MAC Hostname )

    192.168.1.2 00:00:48:83:T5:E9 Main
    192.168.1.3 00:30:BD:F7:4G:6C Dell
    192.168.1.4 00:30:BD:91:8D:99 Acer
     
  86. jagboy

    jagboy Network Guru Member

    it is in the managment page
    [​IMG]
     
  87. Cyberian75

    Cyberian75 Network Guru Member

    With this version, my wired PC getting disconnected every minute or two. I thought it was the NIC initially, but it appears to be a bug with the DHCP server.

    Is this a known bug?


    I bricked my WRT54GS by the way trying to go back to Linksys firmware. :(
     
  88. jagboy

    jagboy Network Guru Member

    how did you bricked again. thefirmware loaded and then a brick or what??
    did you try different ethernet ports on teh back of the wrt for the pc that kept getting disconnected
     
  89. Cyberian75

    Cyberian75 Network Guru Member

    DD-WRT prefinal 4 loaded fine, but when I tried to go back to the original firmware, it got bricked. I believe I got disconnected in the middle of the process.

    I hadn't thought of trying other ports. Too late now... :(
     
  90. jagboy

    jagboy Network Guru Member

    looks like it was not dd-wrts fault that you bricked the router becuase of the fact that you got disconnected
     
  91. Cyberian75

    Cyberian75 Network Guru Member

    It was my fault that it got bricked; however, frequent disconnection appeared to be a bug of prefinal 4.
     
  92. jagboy

    jagboy Network Guru Member

    did you unbrick it. dont lose hope in dd-wrt. dd-wrt pre 5 came out. :wink:
     
  93. Cyberian75

    Cyberian75 Network Guru Member

    I'm returning it to Amazon. Heh. :D
     
  94. jagboy

    jagboy Network Guru Member

  95. RMerlin

    RMerlin Network Guru Member

    "T5"? I didn't know MAC had been changed from Base-16 to Base-26 denotation :)
     

Share This Page