1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Teaman-ND/SDHC v0025 and Teaman-RTv2025 released

Discussion in 'Tomato Firmware' started by teaman, Jun 15, 2012.

  1. teaman

    teaman LI Guru Member

    Hi everyone!

    Tomato Teaman-ND/SDHC v0025 and Teaman-RT v2025 were released just a few moments ago.

    Most important things (from the changelog):
    http://code.google.com/p/tomato-sdhc-vlan/wiki/Changelog
    • EXPERIMENTAL VLAN/VID mapping GUI - allows using full range/4k 802.11Q tagging on some models.
    • IPTraffic:
      • change NVRAM defaults to 'disabled'
      • check/validate minimum size of LAN/subnets only when cstats is enabled
      • Fix JS error causing initial load delay when default nvram 'tomato' skin (Moc-RT-N)
    • MultiSSID:
      • check/warn about any BSSID/MAC address discrepancies on WL VIFs (Advanced: Virtual Wireless, advanced-wlanvifs.asp)
      • fix WL MAC filter to include all WL VIFs (Basic: Wireless Filter, basic-wfilter.asp)
      • WPAx fixes - skip WPAx/nas restart (can cause problems with WAN as Wireless Client)
    • PPTPD:
      • fix/config dnsmasq to answer DNS queries on pppX interfaces
      • fix PPTP when used over WAN setup using PPPoE
      • allow specify 'custom' config/settings on webUI
    • Add SNMP configuration options for custom port and remote access (Moc-RT-N)
    • Add configuration options for the WAN ICMP Rate limiting (Moc-RT-N)
    • ash: fix execution of shell scripts without shebang (JYAvenard)
    • Samba security fix - "root" credential remote code execution (Toastman)
    • firewall: allow DMZ-style forwarding to any LAN bridges (no longer restricted to primary LAN)
    • VLAN-GUI: include E4200v1 (VLAN 802.1q support confirmed by users - see Issue #9)
    • rc: syslogd custom path improvements (tries to preserve messages at syslogd restart, recreate only if it's a symlink/custom path)
    Sources:
    http://repo.or.cz/w/tomato.git/shortlog/refs/heads/Teaman-ND-SDHC
    http://repo.or.cz/w/tomato.git/shortlog/refs/heads/Teaman-ND
    http://repo.or.cz/w/tomato.git/shortlog/refs/heads/Teaman-RT
    http://repo.or.cz/w/tomato.git/shortlog/refs/heads/Teaman-IPTraffic
    http://repo.or.cz/w/tomato.git/shortlog/refs/heads/Teaman-PPTP
    http://repo.or.cz/w/tomato.git/shortlog/refs/heads/VLAN-MultiSSID
    http://repo.or.cz/w/tomato.git/shortlog/refs/heads/VLAN-GUI

    Firmware images:
    http://code.google.com/p/tomato-sdhc-vlan/downloads/list

    Also, there's a new Wiki page with important/must-read information:
    http://code.google.com/p/tomato-sdhc-vlan/wiki/MultiSSIDAdvancedVLANAdditionalNotes

    Have fun!
     
    Elfew likes this.
  2. M_ars

    M_ars LI Guru Member

    Cool :) thx
     
  3. lissny

    lissny Networkin' Nut Member

    Does your tomato support Quota management system and captive portal
     
  4. azdps

    azdps LI Guru Member

  5. lissny

    lissny Networkin' Nut Member

    does teaman build support linksys e series
    except 2000 3000 4200
    asking about 1500 2500 3200??
    which are now added by shibby and toastman
     
  6. kthaddock

    kthaddock Network Guru Member

    E2000 - E3000 - E4200 builds
     

Share This Page