1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Thank You

Discussion in 'HyperWAP Firmware' started by fester_wi, Aug 10, 2005.

  1. fester_wi

    fester_wi Network Guru Member

    Just wanted to thank who ever wrote this. I have loaded it on 4 wap54g's now and all work great. 2 of them do a point to point connection with one set as a repeater. the other 2 are setup at my office as AP so i can roam between them. The firm helped solve some dead spot issues. I have 1 WAP54G hacked with a case fan on the outside hooked directly to the board for power and all the vent holes were drilled larger for more air flow.

    is 84 or what ever a limit that is set in software? Is there anyway to get it higher?

Share This Page