1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

thibor 17c - WOL removal?

Discussion in 'HyperWRT Firmware' started by Banzai27, Feb 5, 2007.

  1. Banzai27

    Banzai27 LI Guru Member

    I was dicking around and now I have the MAC for my VOIP ata in the WOL section of the GUI and I can't remove it?

    Any suggestions?..
    (& how the heck did I do that cuz I didn't mean to set that up?)

    My ata is set to a static DHCP, fwiw.
  2. Thibor

    Thibor Super Moderator Staff Member Member

    it's not something you need to remove. it detects dhcp clients and arp responses on the network and populates the list automatically. don't worry about it's presence, it won't harm it in any way.
  3. Banzai27

    Banzai27 LI Guru Member

    killed my VoIP ATA

    That's what i thought too...but it knocked my ATA out last night = no dial tone.

    I had to reboot the SL and the ATA and all is good now...but....?

  4. rljo

    rljo Network Guru Member

    Hey, wait a minute. What's this about automatically populating the entries on the WOL gui page? Mine has no entries on this page whatsoever. Is this a newer feature? Is it supposed to list the devices on the network by ip and mac? I do see this if I click on the "device list" button (which opens a window with the available devices on the network,) but nothing is listed on the WOL gui page itself other than the headings, and the box to enter the MAc and the wol button.

    Is this how it's supposed to work, or do I need to start troubleshooting. It sure would be handy to have the Mac listed on this page so I can use the wol remotely without having to remember the mac of the machine that I want to wake.

  5. Thibor

    Thibor Super Moderator Staff Member Member

    ah balls, sorry. was thinking of the device list. iirc, wol lists the devices with static dhcp addresses.

Share This Page