1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Thibor downgrade 2011 to 1910 and lost web interface

Discussion in 'HyperWRT Firmware' started by mikele, Dec 7, 2005.

  1. mikele

    mikele Network Guru Member

    Yesterday I tried last 201105 and I'm very unhappy so I decide to downgrade to 191005. I clean the nvram and restore factory settings before and after downgrade/upgrade but some strange web interface appear now (191005). I can't see the encryption mode (blank) or the firmware backup mode (disapear) , on the right web page under "Thibor 2.1b....." I can read "undefined" and all the options choices are moved left on page !!!
    I do an other update with 191005 with same results...
    Any idea are welcome
     
  2. gaster

    gaster Network Guru Member

    What was wrong with 201105?
    I tried it for a while and had no problems.
     
  3. mikele

    mikele Network Guru Member

    Some disconnecting... maybe the router start problem with this update, I don't know.
     
  4. Thibor

    Thibor Super Moderator Staff Member Member

    try flashing to official linksys or dd-wrt and then back to Hyperwrt. i have seen this on one of my routers when flashing.
     
  5. mikele

    mikele Network Guru Member

    4.7xx official linksys on the gun and... :rofl: --->>> Yesssssssssssssssssssssssss
    Thanks Thibor :clap:
    Nice if you see this update problem in future...
    So I don't know about upgrading now, between 191005 or 201105... and I would like to know if 201105 is really better than 191005 ?
    :drinking:

     
  6. Thibor

    Thibor Super Moderator Staff Member Member

    201105 is better
     
  7. mikele

    mikele Network Guru Member

    Thank you Thibor :D
    and thank you for your job :drinking:

     
  8. mikele

    mikele Network Guru Member

    I run the 201105 now... :cheer:
     

Share This Page