1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Thibor Firmware

Discussion in 'HyperWRT Firmware' started by spepi, Sep 29, 2006.

  1. spepi

    spepi Network Guru Member

    I am using the latest build on my Wrt45g...I had Sveasoft Pre Alchemy prior. I used to use WallWatcher to keep an eye on my router....what can I use with this Firmware...the Default Syslog in WallWatcher doesnt seem to see it....also, how do I enable SNMP if I choose to monitor it via SNMP....

    thanks
     
  2. Deranged_1

    Deranged_1 Network Guru Member

  3. hjf288

    hjf288 LI Guru Member

    How much space is available to use when using HyperWRT thibor? Can I use SNMP AND KAID? or one or the other?
     
  4. Deranged_1

    Deranged_1 Network Guru Member

    I've had both snmp and kaid running with no issue in the past. I am unsure as to how much space is available but it can be checked within the command line. As long as this distro supports it try running the df command and it should tell you how many kb is free.
     

Share This Page