1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Thibor15 WRTSL54GS Firmware released

Discussion in 'HyperWRT Firmware' started by Toxic, Apr 20, 2006.

  1. Toxic

    Toxic Administrator Staff Member

    As from the main page:

    Thibor has been working hard on the new Thibor15 firmware this week. Finally he has finished it. There are a number of fixes and additons to the new firmware.

    Changelog:
    Changed to 2.00.5 codebase
    - Resolved issues with not being able to access file over the Internet
    - Resolved security vulnerabilities with web interface

    Updated busybox to version 1.1.2
    Updated iptables to version 1.3.5
    Updated dropbear to 0.48.1
    Updated web Log Page.
    Updated help/Redirect.asp
    Fixed numerous Web Page errors
    Fixed Dial On Demand bug, had to remove p2p qos for now
    Fixed UPnP "Comptuer Name"
    Added service-type for pppoe
    Added lan-gateway dhcp option when WAN is disabled
    Added Rupan's dropbear patch
    Added Layer7 support, protocols are in /etc/l7-protocols

    Check out our Downloads section for the firmware here: Thibor15 for the .WRTSL54GS

    I hope anyone who appreciates his hard work shows some gratitude by visiting his website and making a donation for his hard earned work. http://www.thibor.co.uk/

    NOTE: THIS IS NOT FOR THE WRT54G / WRT54GS / WRT54GL. THE NEXT THIBOR15 FOR THESE MODELS WILL BE OUT IN A WEEK OR TWO.
     
  2. grcore

    grcore Network Guru Member

    Does this release support reiserfs? it does not seem to..

    # mkreiserfs
    -sh: mkreiserfs: not found
    #

    Or does it need to be formatted on a linux box?

    g
     
  3. Toxic

    Toxic Administrator Staff Member

    yeah its missing...


    # ls -la sbin
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 check_ps -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 check_ses_led -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 ddns_success -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 detectwan -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 disconnected_pppoe -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 diskerror -> rc
    -rwxr-xr-x 1 root root 83416 Apr 20 20:42 dosfsck
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 erase -> rc
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 fdisk -> ../bin/busybox
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 filter -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 filtersync -> rc
    lrwxrwxrwx 1 root root 7 Apr 20 20:44 fsck.msdos -> dosfsck
    lrwxrwxrwx 1 root root 7 Apr 20 20:44 fsck.vfat -> dosfsck
    lrwxrwxrwx 1 root root 16 Apr 20 20:44 getty -> ../bin/tinylogin
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 gpio -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 gtime -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 hb_connect -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 hb_disconnect -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 hotdiskadd -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 hotdiskremove -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 hotplug -> rc
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 hwclock -> ../bin/busybox
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 ifconfig -> ../bin/busybox
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 ifdown -> ../bin/busybox
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 ifstat -> rc
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 ifup -> ../bin/busybox
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 init -> rc
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 insmod -> ../bin/busybox
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 ipupdated -> rc
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 klogd -> ../bin/busybox
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 led -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 listen -> rc
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 lsmod -> ../bin/busybox
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 misc -> rc
    -rwxr-xr-x 1 root root 56696 Apr 20 20:42 mkdosfs
    lrwxrwxrwx 1 root root 7 Apr 20 20:44 mkfs.msdos -> mkdosfs
    lrwxrwxrwx 1 root root 7 Apr 20 20:44 mkfs.vfat -> mkdosfs
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 mkswap -> ../bin/busybox
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 modprobe -> ../bin/busybox
    lrwxrwxrwx 1 root root 18 Apr 20 20:44 mount.smbfs -> /usr/sbin/smbmount
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 ntpd -> rc
    -rwxr-xr-x 1 1000 1000 42756 Mar 27 02:26 portmap
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 ppp_event -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 process_monitor -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 purgeshare -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 qos -> rc
    -rwxr-xr-x 1 root root 406236 Apr 20 20:42 rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 redial -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 resetbutton -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 restore -> rc
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 rmmod -> ../bin/busybox
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 route -> ../bin/busybox
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 sendudp -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 ses_led -> rc
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 stats -> rc
    -rwxr-xr-x 1 1000 1000 5844 Mar 27 02:26 store_domain_sid
    -rwxr-xr-x 1 1000 1000 5844 Mar 27 02:26 store_machine_password
    lrwxrwxrwx 1 root root 16 Apr 20 20:44 sulogin -> ../bin/tinylogin
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 swapoff -> ../bin/busybox
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 swapon -> ../bin/busybox
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 syslogd -> ../bin/busybox
    -rwxr-xr-x 1 1000 1000 10036 Mar 27 02:26 tmpgroupadd
    -rwxr-xr-x 1 1000 1000 5844 Mar 27 02:26 tmpgroupdel
    -rwxr-xr-x 1 1000 1000 10052 Mar 27 02:26 tmpuseradd
    -rwxr-xr-x 1 1000 1000 5844 Mar 27 02:26 tmpuseraddgroup
    -rwxr-xr-x 1 1000 1000 5860 Mar 27 02:26 tmpuserdel
    -rwxr-xr-x 1 1000 1000 5844 Mar 27 02:26 tmpuserdelgroup
    -rwxr-xr-x 1 1000 1000 5860 Mar 27 02:26 tmpusersetgroup
    lrwxrwxrwx 1 root root 14 Apr 20 20:44 udhcpc -> ../bin/busybox
    -rwxr-xr-x 1 1000 1000 10036 Mar 27 02:26 user_note
    lrwxrwxrwx 1 root root 2 Apr 20 20:44 write -> rc
     
  4. Thibor

    Thibor Super Moderator Staff Member Member

    i think it has been removed from the 2.00.5 codebase. i'll reinstate it
     
  5. cgondo

    cgondo Network Guru Member

    can i use this firmware for my WRT54G V3.1?
     
  6. Thibor

    Thibor Super Moderator Staff Member Member

    NO, it's for the WRTSL54GS
     
  7. GhaladReam

    GhaladReam Network Guru Member

    Are there plans to release a Thibor15 for the WRT54G/GS? If so, is there an estimate to when that might be?
     
  8. Thibor

    Thibor Super Moderator Staff Member Member

    no, i'm never doing a G version again. it's too much hassle
    **Edit** not really, G/GS will be done within the next week, probably less
     
  9. Raere

    Raere Network Guru Member

    Thanks Thibor, you're the man. A lot more people have G/GS's than people with SL54GS's. If you can, keep up the good work for a teeny big longer, ok? :thumb:
     
  10. ImmortalDragon

    ImmortalDragon LI Guru Member

    true but then there's alot more firmware for the WRT54G/GS's :)
     
  11. chodaboy19

    chodaboy19 LI Guru Member

    I upgraded from v14 to v15 without any issues.

    I only ran v14 for 3 days since I flashed my router the minute I got home from the store.

    thank you for all the hard work. :clap:
     
  12. Toxic

    Toxic Administrator Staff Member

    there maybel be a 15a build for the WRTSL54GS only, as it would seem linksys left out the reiserfs code in the 2.00.5 build. it will be released "when it is ready"
     
  13. rljo

    rljo Network Guru Member

    Thanks Thibor!!!!!
     
  14. Thibor

    Thibor Super Moderator Staff Member Member

    quickie update with 15a. i've left reiserfsprogs out as it is quite large and the ftp server is also big. i have however, added rw support(in the gui) for fat, fat32, ntfs, ext2, ext3 and reiserfs. i just have to fix the wol issue in busybox and it should be good to go.
     
  15. purephase

    purephase Network Guru Member

    Is the WRTSL54GS as good as it sounds? I've read a few reviews, but I figure that opinions here might be a little less biased.
     
  16. Thibor

    Thibor Super Moderator Staff Member Member

    yes, it is as good as it sounds. now if someone would only donate a WL700G, life would be perfect.
    anyway, 15a is now done and being tested by my elite team(Toxic and grcore). if all is good, expect is to be released sometime tomorrow.
     
  17. meq123

    meq123 Network Guru Member

    Eagerly awaiting v15a - I guess (from lack of news) that's it's not GA yet (?)

    Thibor, I have a question though... you say the RW support is now there for a host of formats incl NTFS. Does NTFS support really work properly? I've heard of all the problems with NTFS and Linux and was wondering if you'd found a decent driver, or if it's still a bit flaky.

    Failing that - I'm glad you added Ext3 support. Hopefully that will be the next best thing (i.e. work well on the SL, although not easily physically transferable to an XP-based machine).

    Thank you VERY much for the hard work and time spent on this!
     
  18. grcore

    grcore Network Guru Member

    It seems to write properly, you can create and modify files but you cannot delete files. This probably is a limitation of the driver.

    Personally I would not rely on stability, and would not use it as an everday filesystem. But if needed it could be useful.

    g
     
  19. Toxic

    Toxic Administrator Staff Member

    Thibor has really put alot of time on 15/15a i hope he gets some reward by way of some donations from its users. i wouldn't like his hard work go unrewarded.
     
  20. vincentfox

    vincentfox Network Guru Member

    EXT3

    Regarding comment a couple of posts back, EXT3 format is in fact very transportable to Windows boxes.

    Since Linux file-system format are open and fairly well-understood, in stark contrast to NTFS there are drivers on many platforms.. One software that I have used is EXT2IFS which despite the 2 in the name adds EXT2/3 support to Windows and does it with a friendly installer. So worry not! It's time to move past stone knives and FAT32/NTFS....
     
  21. plugh

    plugh Network Guru Member

    Given the various FAT32 related problems,
    I've been reading and poking at things
    (and I'm not linux savvy)...

    As I understand it -

    linksys 2.0.1 included fat32 and reiserfs
    (but no automount or web gui support for reiserfs)

    ditto for tofu13c and thibor14

    linksys 2.0.5 included fat32 but dropped reiserfs
    (to make room for the ftp server?)

    thibor15a enabled ntfs, ext2, ext3, reiser filesystems
    added automount and web gui support
    but didn't include the mkfs or fsck utils for them

    If anything above is wrong, PLEASE correct me!

    The question I'm leading up to is:

    I can somewhat understand sacrificing the mkfs utils for space,
    but aren't the fsck utils for these filesystems kind of critical?
    That is, after a power glitch / crash and then reboot, shouldn't
    fsck always be done before remounting the file systems?

    Thanks!
     
  22. Darkphoenix

    Darkphoenix Network Guru Member

    Question, ist that Firmware meaned to the WRT54G/S ? cause its calling WRTSL**** ... ?!!
     
  23. Disman_ca

    Disman_ca Super Moderator Staff Member Member

  24. Bill_S

    Bill_S Network Guru Member

    I have a new WRTSL54GS that still has the original firmware (2.00.5) can I flash the newer beta firmware (2.02.1) and then flash Hyperwrt Thibor15c?
    I am trying to make sure that the large file transfer issue is solved.

    Any suggestions.

    Thanks
     
  25. Thibor

    Thibor Super Moderator Staff Member Member

    Bill, no
     
  26. Bill_S

    Bill_S Network Guru Member

    Thanks Thibor, does your new version solve the large file transfer problem?
     
  27. Thibor

    Thibor Super Moderator Staff Member Member

    it does, yes
     
  28. mitku

    mitku Network Guru Member

    Is there a way to add more authentication protocols in following firmware version? I mean especially MS-CHAP v2.
    And is there a way to add in following firmware version an option "Require secured password" in PPPoE, VPN/PPTP etc. setups + respective protocols to put (again I mean especially MS-CHAP v2).
     
  29. FreshNTasty

    FreshNTasty Network Guru Member

    DDNS - EasyDNS

    Oh no! What happened to DDNS for EasyDNS?

    I have a WRT54GS and was a tester for the EasyDNS addition to DDNS in release 14. I just installed 15c to fix the video streaming issues I've had (thank you). Now I notice that DDNS no longer has EasyDNS listed as an option. Please don't tell me it's no longer supported!

    Will there be support for EasyDNS going forward or should I go back to 14 and loose streaming ability?

    Please help!

    Fresh
     
  30. Bill_S

    Bill_S Network Guru Member

    Thibor, any chance you will be updating and using the stock firmware 2.06.0 from Linksys?

    Thanks,

    Bill
     
  31. Toxic

    Toxic Administrator Staff Member

    he is working on a new version yes, but it will be ready, when it is ready, and not before.

    there will be some nice new features, (Applicable to the SL only)
     
  32. Bill_S

    Bill_S Network Guru Member

    Will be happy to wait, thanks for the answer.

    Bill
     
  33. Thibor

    Thibor Super Moderator Staff Member Member

    very soon now, hopefully over the weekend if final testing goes well.
     
  34. Kamilion

    Kamilion Network Guru Member

    Very glad to hear that! I was using 15c on my WRT54G 1.0 that I just sacrificed on a project today. Tomorrow I'm going to head out and pick up a WRTSL54GS!
    Keep up the good work, hope to play with your new release soon! Thanks loads!
     
  35. spoon2021

    spoon2021 LI Guru Member

    WRTSL54GS - NAS - Backup Help

    Is anyone else having problems with the Backup feature for the NAS.

    I can set up jobs but they don't seem to do anything. I also check the syslogs before, during, and after the job was supposed to do a backup,whether from NAS partition or to, and nothing seems to happen.

    Any thoughts or Tutorials or help would be much appreciated.

    Thanks Yo!:biggrin:
     
  36. Thibor

    Thibor Super Moderator Staff Member Member

    to be honest, i haven't done anything with backup except re-enable the code and the page. if i get the time(which i can't promise), i'll take a look at it. i only went as far as checking that the correct cron job was created as scheduled.
     
  37. spoon2021

    spoon2021 LI Guru Member

    Coo! Foo!

    Thanks for the reply! Maybe I haven't tested/troubleshot enough.

    If anyone has gotten the Backup features to work please reply also!!

    That feature on the NSLU2's is great for automated backups and sync-ing. And since the NSLU2's are the same price as the WRTSL54GS. It would be yet another reason to go with a WRTSL54GS.

    Thanks Again Yo! Thibor Rock's because it is a ROCK!

    Thibor 15C
    Uptime : 48 days :biggrin:
    Downtime : playing around :eek:
     

Share This Page