1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Thibor15c for WRT54g v1.1 issue

Discussion in 'HyperWRT Firmware' started by soulmate312, Jan 10, 2007.

  1. soulmate312

    soulmate312 Network Guru Member

    Hi

    Just need 2 know does anyone successfully upgrade to Thibor15c for WRT54G v1.1

    Currently I wish to upgrade from alchemy 1.0 to Thibor15c, Need 2 know must I need 2 flash to the latest version stock firmware 4.20.7 ?

    Please advise.

    Is there any min version for linksys for the Thibor 15c ??

    Pls advise !!! Thanks
     
  2. pharma

    pharma Network Guru Member

    I recall using Thibor15c on my WRT54G v1.1, but I think loading it on took some patience. According to his site you should be able to flash -- there might be instruction there regarding the procedure. It would probably be best to flash to the stock firmware that came with the router before trying. I think there is a thread at http://www.hyperwrt.org/forum related to this. :)

    Sorry I can't give specifics, but I'm currently running Tomato v1.2 firmware w/o issues.

    Pharma
     
  3. ka9yhd

    ka9yhd LI Guru Member

    Yes there is a "mini" version to upgrade from the Linksys firmware. Go to Thibor's site: http://www.thibor.co.uk/#downloads

    But since you are already running a different firmware you should be able to go directly to the full version.
     
  4. Thibor

    Thibor Super Moderator Staff Member Member

    a "mini" version? what are you smoking? and can i have some please? :)
    there is no such thing as HyperWRT mini, they are all the same size, except for the SL version which has samba, ftp, media server, etc
     
  5. soulmate312

    soulmate312 Network Guru Member

    Thibor15C for WRT54G v 1.1

    Thanks for your all the kind advice.

    Thibor, Thanks for the great works for the Thibor15c version for WRT54G/GL/GS.

    Looking at the upgrade requirement on the website:

    Before proceeding, please verify that you are using Firmware compatible for your router. There are two basic versions of HyperWRT Thibor: G/GL/GS (using GSv3 codebase) and SL (using SL codebase).However, there are different firmware files for the G/GL/GS, and the correct one to use depends on the firmware version that will be upgrading to HyperWRT Thibor


    I believe I need 2 upgrade the latest either 4.30.7 (WRT54GLv 1.1 which is equivalent to WRT54Gv 4) or 4.20.7 (WRT54Gv1.1) based on the linksys website (UK)

    Just need clarify can i upgrade to 4.30.7 (which may run based on GSv3 codebase). Tested on WRT54GL and it works well.

    Pls advise. This is the only doubt on the linksys firmware bfore I can upgrade to HyperWRT Thibor.

    Thanks
     
  6. Thibor

    Thibor Super Moderator Staff Member Member

    yes, you can. just select the version in the WRT54GL row
     
  7. soulmate312

    soulmate312 Network Guru Member

    Unfortunately, after i upgrade the software to 4.30.7, all the ethernet port is not working and i can only access via the wireless .

    I try to downgrade to 3.30.7 via wireless which is the stock firmware for sveasoft version 1. I have the same problem that all ethernet work is not working.

    Any advice ??
     
  8. Thibor

    Thibor Super Moderator Staff Member Member

    reset to defaults
     
  9. soulmate312

    soulmate312 Network Guru Member

    I have reset to fault using the GUI as well as the reset button ..

    It still cannot work ...

    All the switch port and the WAN port is not working !!!!

    I can only access via the wireless
     
  10. shadow2k6

    shadow2k6 LI Guru Member

    Thibor 15c works perfectly fine on WRT54G v1.1. I have flashed to this without any issues. I agree with Thibor, reset and try again (nvram reset to defaults). Select this from within the gui.
     

Share This Page