1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Timezone not working (on v4.70.6 - HyperWRT 2.1b1 - Thibor)

Discussion in 'HyperWRT Firmware' started by scotkb, Dec 4, 2005.

  1. scotkb

    scotkb Network Guru Member

    First, the 3rd party firmware is awesome! Many fixes and updates and features that should be in the factory builds. Many thanks to those doing this work!

    I have loaded my WRT54G v4 with the above firmware so that it is the same as my WRT54GS v1 (using instructions from this forum).

    I am running WDS/AP and can only get it to work when I use WEP, WPA breaks the connection. I know the WDS will eventually get sorted out but the time problem should be easy to overcome.

    I am trying to get the timezone to work on the WRT54Gv4 (converted to GS by loading mini DD-WRT and then Thibor). It is set correctly in the basic setup screen and the nvram var shows ok. the ntp_server was blank so I set it one of the ntp servers. i even tried export TZ=PST8DST..

    any help appreciated..

  2. Thibor

    Thibor Super Moderator Staff Member Member

    if you have a Gv1, it can not running my version as it is only for GS routers.
  3. pharma

    pharma Network Guru Member


    In his post he mentions he has a WRT54G v4 and a WRT54GS v1, both of which can run your firmware. I believe he made a typo later when he mentioned WRT54Gv1 -- ScotKB please correct me if I'm wrong.


Share This Page