1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

TinyPEAP as RADIUS for other WRT54G

Discussion in 'TinyPEAP Firmware' started by Pelo2005, Apr 20, 2005.

  1. Pelo2005

    Pelo2005 Guest

    Hello!

    Is it possible that the WRT54G with TinyPEAP works as RADIUS Server for other WRT54G (with alchemy) in the network?

    Regards
    Pelo
     
  2. tinyPEAP

    tinyPEAP Network Guru Member

    Hi,

    Yes, tinyPEAP can be used from multiple APs, granted there exists a connection among them. (regardless of the firmware of WRT54G)
    You will need to point your RADIUS server address
    (just like you would do for your tinyPEAP WRT54G)
    to the tinyPEAP enabled router.

    ex.
    192.168.1.1 tinyPEAP enabled router. (RADIUS pointing to 192.168.1.1)
    192.168.1.2 another WRT54G router. (RADIUS pointing to 192.168.1.1)

    -tak
    tinyPEAP Development Team
     
  3. rory45tt

    rory45tt Network Guru Member

    would this work also if using a wap54g in repeater mode?
    I've tried it and it is not working
     

Share This Page