1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Toastman V1.28.7229.1 2.4 MIPS1 Bug

Discussion in 'Tomato Firmware' started by Mercjoe, Dec 19, 2011.

  1. Mercjoe

    Mercjoe Network Guru Member

    Just noticed more of a cosmetic bug in Tomato Firmware v1.28.7629.1.

    I have the WRT54G get up as a WDS + AP. In the overview page, it lists Broadcast as Disabled, but it is checked as ON in Basic --> Network Settings.

    I know.. minor issue, but a bug.
     
  2. kesdonck

    kesdonck LI Guru Member

    Hello,

    Same config, Same bug for me !
     
  3. teaman

    teaman LI Guru Member

    @Mercjoe, kesdonck - can you please provide the output of the following command on your routers?

    Code:
    nvram show | egrep 'wl._|wl..._' | egrep '_mode|_closed|_ifname|_vif' | egrep -v 'net|reg|btc|vlan|security|auth'
    Please do include all routers on your respective deployments. Also, let us know which particular build/version each of them currently runs, as well as any other possibly-relevant information that might be helpful ;)

    Thanks!

    EDIT: please also run the following command:
    Code:
    cat /www/status-data.jsx | grep wl_closed | wc
    I suspect you guys will get something like this:
    Code:
    0        0        0
    ... while you should be getting something a bit more like this:
    Code:
    1        3      792
    Anyways - please let us know the results of all those test whenever possible - thanks!
     
  4. kesdonck

    kesdonck LI Guru Member

    Here we go:

    Code:
    nvram show | egrep 'wl._|wl..._' | egrep '_mode|_closed|_ifname|_vif' | egrep -v 'net|reg|btc|vlan|security|auth'
    gives for both routers :
    wl0_closed=0
    wl0_ifname=eth1
    wl0_mode=ap

    and
    Code:
    cat /www/status-data.jsx | grep wl_closed | wc
    gives the same result :

    0 0 0

    Linksys is the one connected on internet, IP 192.168.0.1, DHCP server
    Buffalo is connected with WDS+AP and has IP 192.168.0.2
     
  5. Toastman

    Toastman Super Moderator Staff Member Member

    Okay, thank you! We see the problem and fixed it. It will be corrected in next build ;)
     
  6. Mercjoe

    Mercjoe Network Guru Member

    Just for completeness:

    Main router first string:

    wl0_closed=0
    wl0_ifname=eth1
    wl0_mode=ap

    Second string:

    1 3 815

    Remote router:

    First String:

    wl0_closed=0
    wl0_ifname=eth1
    wl0_mode=ap

    second string:

    0 0 0
    Firmware versions for this test:

    Main Router:
    WNR3500l using Tomato Firmware v1.28.4493 MIPSR2-Toastman-VLAN-RT K26 USB VPN+NOCAT
    Remote router:
    WRT54Gv2.1 using Tomato Firmware v1.28.7629.1 -Toastman ND Std
     

Share This Page