1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tofu 11 and Kaid

Discussion in 'HyperWRT Firmware' started by Jamie_03, Dec 5, 2005.

  1. Jamie_03

    Jamie_03 Network Guru Member

    Hi

    Have installed tofu 11 firmware and want to have kaid om the router but can't get kaid control pad to work with it. Any ideas???

    Have edited the config file but still no luck. :-(
     
  2. gaster

    gaster Network Guru Member

  3. Jamie_03

    Jamie_03 Network Guru Member

    Tried that with no luck. My router hang and I had to reinstall the originale firmware to get access to the router again. :-(
     
  4. sollie

    sollie Network Guru Member

    confirmed, has to do with the new telnet deamon, busybox 1.01
     
  5. Thibor

    Thibor Super Moderator Staff Member Member

    this method works with the GS release(it's identical to Tofu's)
    if you are referring to the XBMC script, it has to be modified to support a password login attempt
     
  6. Jamie_03

    Jamie_03 Network Guru Member

    I've edited the config file with the correct password on my router.... any other way it has to be modified???
     
  7. sollie

    sollie Network Guru Member

    thibor, there are two xbmc scripts.
    1. restartkaid.py, this script will work by add a password line. It communicates trough a python telnetlib.

    2. Kiad control Pad, it use a urllib through python. This script has broken. This script is popular because it has many functions like:
    - start kaid
    - stop kaid
    - restard kaid
    - version detection
     
  8. Thibor

    Thibor Super Moderator Staff Member Member

    right, thanks for the info. i knew of restartkaid.py but not of the kaid control pad. i believe the author is currently working on it now
     
  9. sollie

    sollie Network Guru Member

    WOOT, on the xlink forum i read that the problem is fixed for tofu 10/11 (my own topic). The script will be up in a couple of days on xbmcscripts.com.
     
  10. Nuka1195

    Nuka1195 Network Guru Member

    I uploaded a newer version here.

    http://www.filefactory.com/get/f.php?f=c5f9c6df9f2c0210a14fc59e

    It's got some display bugs, but it should work.

    The configuration file is now in xml format. CfgFile.xml

    PadFile.xml saves pad size and position, which can be adjusted from the script

    You have 9 animation settings. 0 - 8, 0 is no animation.

    Leave the following to 2 for newer hyperwrt firmware.(tofu's)
    <setting type='int' id='router_firmware'>
    <value>2</value>
    </setting>

    I'll finish it in a few days and try to resubmit it to xbmcscripts.com.
     
  11. sollie

    sollie Network Guru Member

    the beta work for me, i use 16x9 xbmc.

    i saw one little bug: when you try to move the script with the white butten, left goes to right and right to left.

    thank you very much.

    PS: is it more stable not to add the startup script from tofu?
     
  12. Nuka1195

    Nuka1195 Network Guru Member

    Hi,

    All the bugs have been fixed, hopefully.

    I just need to test it with older firmware and then I'll resubmit it to www.xbmcscripts.com.

    NEW: You can now edit most important settings from the script.

    The startup script is nice, I just like having control of starting and stopping kaid from the xbox.
     
  13. sollie

    sollie Network Guru Member

    thank very much,

    i have a last question:
    is it possible to split up upload/start button. I dont like to upload when i only need te start.

    Thanks
     
  14. Nuka1195

    Nuka1195 Network Guru Member

    The restart button starts kaid if it's not running or restarts it if it is.

    A new version will be up in a couple days.
     
  15. Nuka1195

    Nuka1195 Network Guru Member

Share This Page