1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tofu 7.0 Firmware Problem

Discussion in 'HyperWRT Firmware' started by GShioda, Nov 2, 2005.

  1. GShioda

    GShioda Network Guru Member

    Hi , i have upgrade tofu 7.0 in my WRT54GS1.1 and seems to be fine but now when i want to try flashing some other firmware (ddWRT) or original LinkSys i'm always geting error Upgrade failed, i have try hard reset first, tftp , but still error message Upgrade failed . Any idea? :sadbye:
  2. Toxic

    Toxic Administrator Staff Member

    Tofu firmware is for the WRT54G and not the WRT54GS

    Not too sure how you get your GS back from being a G but you could possibly use Alchmey v1.0 this firmware is for both G and GS perhaps and i am only guessing at this stage you could use that then force a GS firmware on top of it. or try DDWRT v23 GS Mini version using tfpt.
  3. GShioda

    GShioda Network Guru Member

    I found solution,

    1. I have flashed ddWRT generic firmware over Tofus one
    2. from ddWRT Generic to ddWRT54GS and i have back my WRT54GS

  4. Toxic

    Toxic Administrator Staff Member

    nice one! thanks for the information.

    glad you got it back.

    btw... you can use HyperWRT Thibors build for the GS. this i very similar to Tofu's but for the GS model if you wan to use HypeWRT.
  5. GShioda

    GShioda Network Guru Member

    Thank You

Share This Page