1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato 0.07 init script - bug?

Discussion in 'Tomato Firmware' started by damko, Oct 15, 2006.

  1. damko

    damko Network Guru Member

    I've just noticed that init (startup) script which can be entered and saved through "Administration / Scripts" is never executed. Before I used Thibor15c where the startup script executed normally.


    Can anyone confirm this?


    Tnx.
     
  2. Int15

    Int15 Network Guru Member

    I seem to have the same issue. Maybe I'm missing something?

    -Int15
     
  3. canis

    canis Network Guru Member

    Yes. I confirm, but Wan up and firewall scripts are executed.
    I did`t check it in v0.08.
     
  4. turbo53

    turbo53 Network Guru Member

    I didn't check v0.07, but I can confirm that the startup script for v0.08 works fine for me. You should upgrade and try again.
     
  5. dtswk

    dtswk Network Guru Member

    ok running 0.7 and loading and starting SNMP working no problems... sorry didnt reply sooner.

    Here is a straight copy of my script from the init tab
    sleep 5
    wget -P /tmp http://10.1.1.201/snmpd
    wget -P /tmp http://10.1.1.201/snmpd.conf
    cd /tmp
    chmod +x ./snmpd
    ./snmpd -c /tmp/snmpd.conf
     

Share This Page