1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato 1.02 Released

Discussion in 'Tomato Firmware' started by der_Kief, Jan 1, 2007.

  1. der_Kief

    der_Kief Super Moderator Staff Member Member

    Hi @ All,

    tofu has just released new version 1.02 :biggrin:

    Changelog:

    • Fixed several field validation problems in Basic/Network.
    • Fixed WINS setting erased on DHCP "deconfig" event.
    • Fixed awk hangs evaluating a regular expression. Seems to be a compiler quirk.
    • Fixed PPPoE may take a while to reconnect in some cases because of abrupt termination.
    • Added an option in Advanced/DHCP for reduced DHCP packet size (WAN side). Toggling this may help fix problems with DHCP failing to aquire an address. The previous behavior was the same as enabled in 1.00 and 1.01, the default is now disabled, the same behavior as the original udhcpc.
    • DDNS (ez-ipupdate) now retries if connect() fails. This is on a lower level only, it does not include errors given off by DDNS services or web site errors (incorrect password, 404, etc.).

    der_Kief
     
  2. pharma

    pharma Network Guru Member

    In my setup Port Forwarding and UPnP Forwarded ports are now being listed on the appropiate GUI pages as they should! :)


    Thanks Jon!!

    Pharma
     
  3. orangekay

    orangekay LI Guru Member

    PPPoE does indeed seem to be a bit better about reconnecting expeditiously, which was my primary gripe with 1.01. I do wonder though, is there any tangible benefit to distributing the binaries in this esoteric .7z format which the web server isn't even configured to deliver properly? Seems like a ton of extra time for absolutely no payoff from the end user perspective.
     
  4. wycf

    wycf Network Guru Member

    Upgraded! :)

    Thank you!
     
  5. tekunix

    tekunix LI Guru Member

    LED's while upgrading...

    The cisco led's can't blink more while upgrading? lol! Always...when upgrading tomato I suddenly think... I just turned my router into a brick! It's simply impossible for a light to blink faster than that...lol

    __________________________________________________________________
    Get your own brand new WRT54GL w/
    SD/MMC Mod @ http://tekunixcorp.com
     
  6. jimeez

    jimeez Guest

    Hi guys. New to Tomato, but very pleased with it so far. Thank you to everyone who works on this!!

    One question: if I upgrade to 1.02, will I have to adjust all my settings again (i.e. QoS, port forwarding)?
     
  7. tekunix

    tekunix LI Guru Member

    No...Everything will stay there...
     
  8. njeske

    njeske Network Guru Member

    sounds like another great release! i'll be upgrading my routers when i get home in a few hours.
     
  9. NateHoy

    NateHoy Network Guru Member

    Upgraded from 1.01 to 1.02 earlier today, just a straight upgrade with the required reboot. No problems, smooth upgrade, uptime clock around 5 hours and counting.
     
  10. der_Kief

    der_Kief Super Moderator Staff Member Member

    Same here :biggrin:
    No problems at all.

    THX Jon
     
  11. purephase

    purephase Network Guru Member

    Just did the update. No issues whatsoever.
     
  12. njeske

    njeske Network Guru Member

    upgraded with no issues. been up for a couple hours now. thanks for the great firmware!!
     
  13. yasmine

    yasmine Network Guru Member

    help with tomato block sites

    Thanks very much for that tomato release

    I need to block some site on the routeur (baby)
    how can I do that with tomato??
     
  14. der_Kief

    der_Kief Super Moderator Staff Member Member

    You can do that at the "Access Restriction" tab !
    Or can do it via this firewall script
    example:
    blocking 222.164.2.34
    iptables -I FORWARD -d 222.164.2.34 -j DROP
     
  15. yasmine

    yasmine Network Guru Member

    Thx
    I dont see firwall menu
    and
    how to do that with words (s ex, fu ck, ...) ??
     
  16. der_Kief

    der_Kief Super Moderator Staff Member Member

    administration->scripts->firewall

    In Access Restriction you can set keywords.
     
  17. pharma

    pharma Network Guru Member

    As
    der_Kief mentioned, if you go to Access Restrictions, select Add, and when you Uncheck "Block All Internet Access" you will see additional menu's -- enter your keywords in the HTTP Request box and save the rule. It is very flexible and through testing you should be able to fine-tune your restrictions.

    Or see example Jon provided:
    http://www.polarcloud.com/v/screst.htm

    Pharma
     
  18. tstrike2000

    tstrike2000 Network Guru Member

    Tomato 1.02 has been running very well for me the last day or so as the other Tomato versions have. QoS for VoIP, DNS Caching/MASQ, port forwarding, etc. all work very well. It is very lean like Jonathon mentions in the notes. Well worth the donation to him.
     
  19. tekunix

    tekunix LI Guru Member

    Still working perfectly here too... (and I have many, many port forwards as well as a heavy P2P traffic 24/7)

    __________________________________________________________________
    Get your own brand new WRT54GL w/
    SD/MMC Mod @ http://tekunixcorp.com
     
  20. F157

    F157 LI Guru Member

    The update went well like every time before, I love to be online again after 2 minutes, no need to reconfigure the router :)
     
  21. Devotedfollower

    Devotedfollower LI Guru Member

    just installed

    Just installed it on a friends router --- works perfectly with QoS for VoIP, gaming and bit torrent

    Thanks again!!!
     
  22. rcordorica

    rcordorica Network Guru Member

    [​IMG] :D :)

    before i found out about this new version! Thanks!
     
  23. digitalgeek

    digitalgeek Network Guru Member

    you should post your up time in the thread "Longest Uptime"
     

Share This Page