1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato 1.03 Released

Discussion in 'Tomato Firmware' started by Rudi1, Jan 22, 2007.

  1. Rudi1

    Rudi1 Network Guru Member

    This great firmware is updated to Tomato 1.03


    Tomato_1_03

    1.03 Changelog
    Fixed using Wireless Survey if wireless was disabled made the power/diag led light up.
    Fixed Admin/Bandwidth Custom Path field validation error.
    Fixed DDNS may parse a custom DDNS incorrectly if @ is used in a URL with basic authentication.
    Fixed DDNS Force Update option wasn't working.
    Fixed wrong type detection for some routers.
    Removed -mips32 gcc switch which may be causing some random weirdness.
    Synced a few changes in Linksys WRT54GL 4.30.9: Fix for CVE-2006-0039, some changes resulting from CDRouter testing, a few prebuilt apps.
    Updated PPTP conntrack/NAT helper patch.
    Increased allowed length of router hostname and domain name.
    Default SSID is now "wireless" instead of "linksys".
    Updated iptables to 1.3.7.
    Updated L7 filters to 2007-01-14 release. New: Chikka, Radmin. Updated: BitTorrent, Battlefield 2, etc.
    Added option to disable wireless radio in Access Restriction.
    Added No-IP.com DDNS service, including support for groups.

    Cheers and Thanx Jon for your work! :)
     
  2. der_Kief

    der_Kief Super Moderator Staff Member Member

    Hi @ All,

    there is also a new official FAQ section on the Tomato homepage ->
    http://www.polarcloud.com/tomatofaq

    THX to Jon

    der_Kief

    P.S Will try the new version when i'm back home
     
  3. neutralman

    neutralman Network Guru Member

    I would kindly ask Tofu/Tomato to update layer7 filter due to new function called groups

    http://l7-filter.sourceforge.net/protocols

    >Protocols are marked as being in one or more "groups". Some groups refer to what sort of purpose each protocol has. These allow front-ends to treat a set of protocols in the same way without requiring the user to select (or know about) each individual protocol. For instance, an application could have a checkbox for "VoIP" rather than one for Skype, one for H.323, etc..<

    That would make QOS configuration so much easier, insted of making rules for torrent, emule and so on, you could just selecd P2P and shape all P2P in one shot :)

    this is also VERY helpful for VoIP too.

    Tofu/Tomato, please tell me what do you think about this idea?
     
  4. der_Kief

    der_Kief Super Moderator Staff Member Member

    Hi neutralman,
    i think you should email your request directly to tofu(Jon)

    der_Kief
     
  5. Tupac_Shakur

    Tupac_Shakur Network Guru Member

    whats the default password, I can't log back in.

    I tried admin and it didn't work.
     
  6. digitalgeek

    digitalgeek Network Guru Member

    The password will only reset if you cleared nvram before flashing, otherwise the password is the same as it was before you flashed!
     
  7. GeeTek

    GeeTek Guest

  8. neutralman

    neutralman Network Guru Member

    done :)

    I didn't know where to find "tomato" e-mail, fortunately I found it in Tomato FAQ
     
  9. pharma

    pharma Network Guru Member


    The next few lines from the link you provided ...

    I could be wrong, but it seems Groups are volatile (change alot) and contain non-standard categorizations. Seems to have alot of overhead to maintain Groups and think the method currently implemented in Tomato requires less maintenance.

    It probably why Jon mentioned in the Tomato readme.htm that you can create Custom L7 patterns if one you require isn't in the list.

     
  10. der_Kief

    der_Kief Super Moderator Staff Member Member

    i just upgraded to 1.03 and what to say: like every update before, NO problems at all

    :thumbups:

    der_Kief
     
  11. pharma

    pharma Network Guru Member

    Upgraded to 1.03 and running smoothly here as well! :clap: :clap:
     
  12. bogderpirat

    bogderpirat Network Guru Member

    works quite well here also. i also like the l7-extra solution a lot. looks like jon is reading a bit over here. ;)
     
  13. GhaladReam

    GhaladReam Network Guru Member

    Just upgraded to 1.03 over here as well. Works like a charm. Is it necessary to clear NVRAM before and after upgrade, then re-key the settings? I did it just to be on the safe side, but I'm wondering if it's really necessary.
     
  14. der_Kief

    der_Kief Super Moderator Staff Member Member

    Hi, this is from the new official FAQ -> http://www.polarcloud.com/tomatofaq#should_i_reset_the_configurati :wink:

    der_Kief
     
  15. wycf

    wycf Network Guru Member

    running 1.03 now! :)

    no-ip DDNS works great!!!
     
  16. gotamd

    gotamd Network Guru Member

    I upgraded without clearing NVRAM or resetting to defaults and everything seems to be working perfectly. God job!
     
  17. damko

    damko Network Guru Member

    Just upgraded to 1.03. Amazing job :)

    Thanks Jon!!!!
     
  18. Max Monroe

    Max Monroe LI Guru Member

    Sailing under 1.03... all systems nominal... :biggrin: ...and 1000x thx for the inclusion of no-ip.com...!

    Max
     
  19. pablito

    pablito Network Guru Member

    Upgraded fine here too.

    Funny thing while upgrading:
    My WRT is on the WAN side of my RV8 that is in router mode. I've been using RIP without problem. Early on in the upgrade process I lost RIP and the upgrade failed. That was a clue to what happens during the process. Once I put a static route in I could complete the upgrade.
     
  20. Dwibbly

    Dwibbly Network Guru Member

    1.03

    Updated and all well here.

    Just wondering a couple of things-
    1) iptables.
    What are they used for?
    2) L7 filters, they are for blocking programs like emule etc right?
    Does it block Skype too?

    Great router and great firmware, keep it up.
     
  21. bogderpirat

    bogderpirat Network Guru Member

    l7 is for finding out what kinds of connections are being opened. you can block them with access restrictions and prioritize them with QoS. skype included.

    ipfilters is a linux firewall program and can be used for routing.
     
  22. myersw

    myersw Network Guru Member

    I just upgraded to 1.03. Upgrade went flawlessly same as every other time when using Jon's firmware. Don't know how he does it.
    The new FAQ on the Tomato web site looks good also. Previous message gave the link, but just go the the normal download site and you will find it.
    Lots of questions answered, some generic, such as Windows DHCP behaviour, not good at times.
    Another great release.
    --bill
     
  23. purephase

    purephase Network Guru Member

    Just upgraded. No issues at all, another great release!
     
  24. digitalgeek

    digitalgeek Network Guru Member

    Gotta love them Tomatos!!! :) :thumpup: 1.03 is running without any issues.
     
  25. GeeTek

    GeeTek Guest

    I like the asterisk that mark the default values. Also, the new included batch file for writing trx files to the Buffaloes is very nice. I had always used the tftp program from linksys, now I don't need to. Jon's batch file works much better and is even easier to use ! I hope Jon doesn't get tired of hearing the word "Thanks". Seems that he has been hearing it a lot lately. Thanks Jon.

    Edit - Gui for default RF MW on the HP still shows 42 Mw, but is 10.
     
  26. MadPriest

    MadPriest LI Guru Member

    Well, although i had some 40 minutes of sweating and cursing cause smth went wrong and my WRT54GL didn't want to switch on and my tries to hard reset didn't help, after getting the flash into the router using tftp i'm up with 1.03 for 2 days.
    Works nice!
    Thanks!
    :)
     
  27. clawhammer

    clawhammer LI Guru Member

    Is a 1.02 tomato configuration .cfg compliant with tomato 1.03 ?

    thanks
     
  28. der_Kief

    der_Kief Super Moderator Staff Member Member

  29. PRDR

    PRDR Network Guru Member

    Same here, no problems so far, and happily using the new no-ip.com ddns feature. Thanks a million!
     
  30. Reiper

    Reiper LI Guru Member

    Good here on 1.03! :)
     
  31. Kibe

    Kibe LI Guru Member

    Update and rolling!

    :D
     
  32. johnny2002

    johnny2002 LI Guru Member

    I can access the tomato website recently, can anyone do me a favour to send one copy into my mail box at: johnny.zhou@163.com ?
     
  33. tievolu

    tievolu Network Guru Member

    Not sure why the tomato website's not working for you - works fine for me. If you're still having trouble, I've uploaded the 1.03.0943 firmware package here:

    http://tievolu.googlepages.com/Tomato_1_03.7z
     
  34. unicorn02

    unicorn02 LI Guru Member

    Updated from Thibor 15c to Tomato.

    Everything went flawlessly! :)

    Just love the UI! Simple and informative!
     
  35. clawhammer

    clawhammer LI Guru Member

  36. lwf-

    lwf- Network Guru Member

    Not necessarily for most people. As a matter of fact I got a WRT54GS 1.1 and I cant even tell whats actually is fixed since I didn't have any problems before either.

    1.04: * Fixed detection for WRT54G 2.2, 3.x, WRT54GS 1.1, 2.x.

    Also you shouldn't direct link to the files.
     
  37. pharma

    pharma Network Guru Member

    Upgraded to 1.04 and running smoothly!!:) In my case web-browsing with 1.03 seemed alittle sluggish, but this could have been due to some local network issues. Since going to 1.04 pages so far have the familiar snappy, fast response. :thumbups:

    Decided to upgrade since proper router detection might have impact on code logic, ie, (If-Else-Then code). Though not sure this is true for linux, but better safe than sorry. :biggrin:

    Pharma
     

Share This Page