1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato 1.19.8815 Mod.

Discussion in 'Tomato Firmware' started by Victek, May 19, 2008.

Thread Status:
Not open for further replies.
  1. Victek

    Victek Network Guru Member

    Tomato 1.19.8850 Mod. Updated

    Tomato 1.19.8815 mod by Victek

    May 19 '08.

    Changes over Oficial Tomato 1.19

    REMEMBER to execute a nvram erase through after upgrading to this version and configure manually again to avoid unstable behaviour. Do not restore your configuration file, some values and new values are removed/added in the nvram pool.

    _ Updated to BusyBox 1.10.2 (IP WAN DHCP renew tested and fixed)
    _ JHash Conntrack 8092 connection (Speed Mod)
    _ Conntrack default values adjusted for high P2P load
    _ Theme for visual handicaped
    _ Eight additional themes, Bluedream, Enlightenedd, Tijuana, Asus, Linksys, Buffalo
    _ Spain TZ included
    _ CPU Frequency.
    _ Previous IP display
    _ Two additional window for Button script
    _ Bandwidth Limiter per IP/MAC
    _ Code Optimization

    Links.

    http://victek.is-a-geek.com

    or

    http://rs111.rapidshare.com/files/115971885/Tomato_1.19.8815_Victek.7z

    and sources.

    http://rapidshare.com/files/115972758/Tomato_source_code_1.19.8815_Victek.tar.bz2

    Enjoy!

    Updated. Last version 1.19.8850
    Date. June 9,2008
    Changelog:
    *-Bug Fix in DHCP/DNS menu SAVE button
    *-Mandatory fields in Basic/Identification
    *-BusyBox 1.10.3 (new commands added).

    Links
    http://www.filesend.net/download.php?f=d7eab549cd930ea8b5941c8f6d1ec491
    or
    http://victek.is-a-geek.com

    Thanks to all who risked their router.. no warranty about, and no donation is required, only for the former author of Tomato..
     
  2. mstombs

    mstombs Network Guru Member

    Hi,

    are they any special instructions to recompile this from source? I thought the later busybox needed a newer compiler than the linksys 2.95? I particularly interested in adding the sendmail option available in busybox 1.10+, noticeable by its absence in standard Tomato.
     
  3. Victek

    Victek Network Guru Member

    Not special, some switches (-l -m) present in the original Tomato firmware are not longer used by the BB 1.10.2, then a new rebuild (or ignore) in dhcp.c was done. A new make in the BB and adding changing functions was done (you can see changes in configbusybox file).

    Thanks
     
  4. Kiwi8

    Kiwi8 LI Guru Member

    Are there any screenshots of the firmware in action, especially the webpage captures of the newer features? :)
     
  5. cHarOn

    cHarOn Network Guru Member

    yes would be cool to see the new features on some screenshots :)
     
  6. nvtweak

    nvtweak LI Guru Member

    Yeah Busybox 1.10.2 seems to work fine with Tomato 1.19. I am running it in my custom build also (thanks to roadkill and Victek ;))

    Hopefully Jon will upgrade it in his next release. It includes some new utils (as you have mentioned), and is a few bytes smaller as well. I was able to fit in sendmail, tftpd, stty, and still have the firmware end up the same size as Jon's v1.19 with Busybox 1.2.2.
     
  7. Victek

    Victek Network Guru Member

  8. nvtweak

    nvtweak LI Guru Member

    Another thing which I think would be a good addition to your mod; Fancy Shell Prompt and Expand Prompt.

    This makes it so your Telnet/SSH prompt displays current directory. i.e. Instead of

    #

    You will see;

    /tmp/home/root #

    To do it, in Busybox config set
    CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
    CONFIG_ASH_EXPAND_PRMT=y
     
  9. jsmiddleton4

    jsmiddleton4 Network Guru Member

    Very impressive work. What if any of these things might get included in Tomato 1.20?
     
  10. nvtweak

    nvtweak LI Guru Member

    Probably none of these things in 1.20. I think Jon will probably stick to stability and bug fixes only. But that's just my guess.
     
  11. roadkill

    roadkill Super Moderator Staff Member Member

    good idea thanks for the tip
    :grin:
     
  12. nvtweak

    nvtweak LI Guru Member

    You're welcome :) To go even further, have a look at busybox/shell/ash.c as I think you can tweak the prompt there. For example

    Code:
    #if ENABLE_FEATURE_EDITING && ENABLE_FEATURE_EDITING_FANCY_PROMPT
    vps1.text = "PS1=\\u@\\h:\\w\\$ ";
    
    (might need to escape the @ character, not sure)

    This would make it

    user@hostname:/tmp/home/root#
     
  13. roadkill

    roadkill Super Moderator Staff Member Member

    no I think this is a bit too much ... but the path is smart..
    thanks
     
  14. mstombs

    mstombs Network Guru Member

    On another system I have with BB 1.10.1

    export PS1='\[\033]0;$MSYSTEM:\w\007\033[32m\]\u@\h \[\033[33m\w\033[0m\] #'

    gives

    in colour!
     
  15. nvtweak

    nvtweak LI Guru Member

    :wink:
     
  16. TexasFlood

    TexasFlood Network Guru Member

    Cool. sendmail is a nice additional, gives you the option of sending out an alert instead of just logging it.
     
  17. Victek

    Victek Network Guru Member

    Hi, Thanks for the tip nvtweak, updated!
     
  18. kevanj

    kevanj LI Guru Member

    Hey Victek,

    you know that victek.is-a-geek.com is blocked by OpenDNS as a pr0n/nudity site??
     
  19. madsul

    madsul LI Guru Member

    The Advanced DHCP/DNS page doen't seem to Save
     
  20. Victek

    Victek Network Guru Member

    :eek::eek::eek: well... OpenDNS needs to go to some advisor... :):):) , Firmware nudity and programming is not offensive till now as far I know ...

    Thanks for the joke! :)
     
  21. Victek

    Victek Network Guru Member

    Thanks for advice, yes, you're right, I'll fix for next release. As you see I delete the function Small packet size because this feature is a default value for BB 1.10.2, then, is no longer needed.
     
  22. madsul

    madsul LI Guru Member

    Opendns is really blocking you. no Joke
     
  23. Victek

    Victek Network Guru Member

    :eek::eek: I saw it and sent one ticket to review and correct it.

    http://www.stbernard.com/ software guys put me in this category ... one way to keep their business

    Thank you.
     
  24. mstombs

    mstombs Network Guru Member

    I never found any reference to the small packet size (-m) option in anything other than Jon's source-code - I assumed it was Tomato-specific?
     
  25. Victek

    Victek Network Guru Member

    Fixed, version changed (1.19.8820), new link updated.

    Thanks
     
  26. nvtweak

    nvtweak LI Guru Member

    It hasn't blocked me yet.

    Nice work Victek :)
     
  27. Daggerx

    Daggerx LI Guru Member

    I'm currently using the 1.19 Speedmod. How are you guys liking this one? I'm thinking of switching. Should I or shouldn't I? No offense to the compiler of course.
     
  28. gingernut

    gingernut LI Guru Member

    I've been using Victek's mods for quiet a long time, maybe from the 1.06 days, and personally love it. Victek has implemented some very nice and useful features in his mod that the original Tomato doesn't have that once you start using just can't live without.
     
  29. nvtweak

    nvtweak LI Guru Member

    I'm pretty sure Victek already included SpeedMod in his build. See the first post.

    Victek, how about an option to display number of connections per IP? I'm working on it for my mod, and thought you might be interested.

    If you compile Busybox including the uniq command, I think the following command will do it.

    Code:
    sed -n 's%.* src=\(192.168.[0-9.]*\).*%\1%p' /proc/net/ip_conntrack | sort | uniq -c | sort -gr
    Or perhaps we can just write some extra code in order for it to display in the web interface.
     
  30. rizsher

    rizsher Network Guru Member

  31. Victek

    Victek Network Guru Member

    rizsher, Yes, English. Only 1.13.xxxx was translated to spanish.

    nvtweak, :biggrin: something like this? (also per ifname), I'm working since 4 days, but it's not ready yet. The IP's are added automatically from DHCP static and you can include other IP's in the same net. I think roadkill is working in other implementation of wireless.

    [​IMG]
     
  32. nvtweak

    nvtweak LI Guru Member

    Yes, the number of current connections per IP.

    Looking great so far :)

    Another idea I had.. A button or checkbox that can enable WAN port as a switch port instead. Could be useful for routers that are only used as an access point/switch ;)
     
  33. Victek

    Victek Network Guru Member

    Unfortunately this subject was talked with Jon time ago, the statement was no, not possible. Let's go step by step. :)
     
  34. nvtweak

    nvtweak LI Guru Member

    Maybe this works?

    BTW, I have partly solved the conntrack issue by recompiling with the Busybox uniq command. Of course, this method currently requires shell access, but it is better than nothing ;) Now I have a way to check on other clients' connections, as the QoS details screen is a little too scrambled.
     
  35. jsmiddleton4

    jsmiddleton4 Network Guru Member

    Does the wireless stay intact so that by running that script you can have a 5 port AP?
     
  36. nvtweak

    nvtweak LI Guru Member

    I haven't tested it yet. But it seems logical to me, because the wireless is bridged to the vlan ports via br0.
     
  37. LLigetfa

    LLigetfa LI Guru Member

    Is there any chance of getting wireless associations logged? My outdoor WISP APs log as does the stock Buffalo firmware.
     
  38. nvtweak

    nvtweak LI Guru Member

    Good idea. Anyone have a solution to accomplish that? I know that the nas process handles WPA authentication, but unfortunately I don't see the source code for it anywhere. It appears to be a prebuilt binary..
     
  39. cityismine

    cityismine LI Guru Member

    In the Advanced -> DHCP/DNS page, when I paste a script and hit the save button, nothing happens. Is this a bug in the firmware?
     
  40. Victek

    Victek Network Guru Member

    Yes, there is a bug, fixed in the next versión. You can see the link in the first post openning this subject with associated changelog information and link to the new version.
     
  41. Victek

    Victek Network Guru Member

    Thanks for the advice about my blocked site by OpenDNS. Here the answer, I hope the mistake will be corrected soon.

    [​IMG]
     
  42. Daggerx

    Daggerx LI Guru Member

    Alright, I upgraded and I'm loving it. Well done. Thank you.
     
  43. z00100

    z00100 LI Guru Member

    The firmware seems great!!!

    I haven't downloaded it yet, but from the posts and the screenshots it looks perfect!

    Will set it up on my WHR-HP-G54 tonight and will report back on how it goes.
     
  44. fareal

    fareal LI Guru Member

    This mod sounds interesting. I just might load it soon. Thanks!
     
  45. Daggerx

    Daggerx LI Guru Member

    Yeah, this is great. I had a ubuntu install I had to do for someone recently and I connected it to my network and I was very happy with the performance of the network and ubuntu itself.
     
  46. kripz

    kripz LI Guru Member

    Looks awesome, hopefully some of the features will be integrated in the official tomato firmware.

    Im mainly interested in the bandwidth limiting and i have some questions.

    Is it a black list? (you specify who you want to limit). I want to specify who NOT to limit, everyone else is limited to 512/128k.
    If only 1 computer is online and it is limited, will it be allowed full bandwidth?

    Thanks and keep up the good work.
     
  47. Victek

    Victek Network Guru Member

    If you don't tick the "limit ulisted machines" in the ARP Binding then all the machines will be free except the machine selected in the bandwidth limiter. The OR/AND or NOT can be accomplished in this way.

    Rgds
     
  48. kripz

    kripz LI Guru Member

    I dont get it, if that is unticked, wouldnt that mean all unlisted machines will get unlimited bandwidth?

    I want to specify 192.168.1.3 and 192.168.1.4 get unlimited bandwidth. All unlisted machines will get 512/128 kpbs.

    Also if only 1 computer is online and it is limited, will it be allowed full bandwidth?
     
  49. jsmiddleton4

    jsmiddleton4 Network Guru Member

    If it matters I've started a seperate thread on just the arp thing so we can learn how to use it, what it does, etc.
     
  50. Victek

    Victek Network Guru Member

    jsmiddleton4, perfect, then this post can be focussed on bugs and functions, Thanks
     
  51. CBR900

    CBR900 LI Guru Member

    Hi...

    Under Administration/Configuration/Restore Default Configuration...there is a " Erase all data in nvram memory (thorough)"

    When to use it?

    What does it do?
     
  52. Victek

    Victek Network Guru Member

    This action is recommended after you upgrade the router firmware or when you migrate from other firmware (dd-wrt, official Linksys firmware...) and before start the configuration. This is the method to clean all variables non used in new release of Tomato version.
     
  53. wongnog

    wongnog LI Guru Member

    just to clarify, Victek's mod includes the same tweaks as speedmod, am I right? What exactly are these tweaks, and when does one need it for p2p apps? Thanks.
     
  54. Toink

    Toink Network Guru Member

    Is it just me or port triggering is not working in this mod (Tomato_1.19.8820_Victek)?

    I have the exact settings as Rod's Speedmod, but port triggering works in Tomato119ND-Speedmod 8502. Installed on WRT54GS v1.1 and WRT54GL v1.1
     
  55. Victek

    Victek Network Guru Member

    Read SpeedMod post to know the features. I just applied his mod in this release.
     
  56. Victek

    Victek Network Guru Member

    Well, the mod applied in my version is Speedmod 8500, then I should update to SpeedMod 8502 in the next release, thanks for the advice. I just integrated it, nothing more.
     
  57. Toink

    Toink Network Guru Member

    Thank you Victek :)

    I really like the extra mod in your build. I shall look forward to your next build then. Your taking time to share your talent is well appreciated :)

    P.S.
    Any chance you can include a DMZ to MAC adress feature? :biggrin:
     
  58. Fedora_Guy

    Fedora_Guy Addicted to LI Member

    Brilliant firmware! I was running DD-WRT v24 (May 2008) on my WRT54GL, simply because (no offence) their new bandwidth logging UI is far superior to the Tomato implementation. For example:
    [​IMG]

    Any chance we could see something like that in this version of Tomato? That'd be great! :biggrin: Anyway the real reason for my post wasn't that cheeky feature request. It was to say thanks for an excellent tweaked Tomato mod.

    On DD-WRT v24, and even the "official" Tomato 1.19, everything was great. I was downloading from Usenet at 2.2 MB/sec (i.e. 2,200 KB/sec plus) and everything worked great. HOWEVER, I tried to download a torrent (Fedora 9 Gnome Live CD) and although my line maxed out at 2.2 MB/sec my web browsing was CRAWLING along. Un-usably slow :thumbdown:

    I'd set up the torrent app just fine, tweaked its number of connections etc and played with DD-WRT and Tomato as much as I could in the web UI. Still my browsing was dead when I was leeching or seeding torrents (at 50% of my upload bandwidth). Then I struck lucky, and came across this thread :)

    I upgraded to Victek's Tomato, and voila! 2.2 MB/sec on torrents, BUT whenever I hit a web page it loads instantly (even one not already in cache) and you can't tell I'm downloading at all. PERFECT, that's all I have to say :cool: Great job.
     
  59. Victek

    Victek Network Guru Member

    Fedora_Guy's avatar looks familiar to me :), this is the distinctive of my mod, the RAF Tomato, typical from the South of Spain (Almeria), it's a great and sweet Tomato to eat just with salt and olive oil (of course), sorry for the off topic.

    I appreciate your feedback.
     
  60. Fedora_Guy

    Fedora_Guy Addicted to LI Member

    Hi Victek,

    I didn't think you'd mind my using the avatar. I'm only using it on here - I was so pleased with the new release I wanted to promote it :biggrin: Now if only we had RAF tomatoes in the UK. I wonder...

    Keep up the great work.
    Cheers.
     
  61. Victek

    Victek Network Guru Member

    You're welcome and thanks for the promotion!! :biggrin: , I wait the digit change from Jon to 1.20 then a new mod release with some other gadget will come. But of course I would like also to see these mod in the official Tomato.. it's a teamwork.
     
  62. jsmiddleton4

    jsmiddleton4 Network Guru Member

    Vic....

    Hard to make suggestions given its you who are doing the work and your expertise and I'm just a poor slob of an end user trying to keep from wetting myself when I try a script but I have a couple of suggestions ranging from probably not too difficult to probably a bit complicated.

    1. For the arp thing, is there a way it can be integrated into the static dhcp area? Sure would make it easier to configure especially given the information, assigning things, etc., are very similar steps for both static dhcp and the arp assignment stuff.

    2. I also wonder about a simple cosmetic thing but its application may not be simple due to different platforms. Its the labeling of the antennas. Some of them have one external and one internal but the labels are "A" and "B" not internal-external, some have 2 external antennas and are still labeled "A" and "B" not left or right. Sure would be nice to have the labels represent what/where the antennas are located. Given the different implementation it may be easier said then done.

    3. Have you followed any of the threads on wireless bridge mode and mac address/ip address duplication in the primary router? It appears it is a cosmetic/gui thing as WET mode works fine but the primary router's device list sometimes will show the MAC of the attached devices to the slave router with the slave router's ip address. It makes it difficult to do any filtering, etc., and makes WDS about the only realistic option if you need to manage devices attached to the slave router using either IP or MAC. WDS works so very well its hard to make too big a case out of it. And practically WET does work. It is possible that the firmware is looking at the wrong data and reporting the incorrect data in the device list of the main/primary router, in other words something not too complicated to fix. It is also possible that its complicated, too complicated for what its worth given WDS works so well.

    I know Tomato is not your baby and you are just tweaking it. But are you working with Jon in a way that funds can be distributed to you for your work? I'm sure you are spending a great deal of time getting matters ironed out and working correctly.
     
  63. Victek

    Victek Network Guru Member

    jsmiddleton4, thanks for your thoughts,

    Sure, Jon got one e-mail with the link to the source code for each one of my silly mod and changelog. I'm working very close with my colleague roadkill, to be honest none of my last mod have been possible without his help and suggestions.

    I suggested Jon to create a svn basket to put all these progress and mod, I know it's hard to maintain and requires some time but under my thinking and also roadkill thought is the only way to take profit for all the mod that some people is developing around Tomato.

    Please add your thought to the wish list of Tomato, then all the people working in Tomato will be noticed about.
     
  64. jsmiddleton4

    jsmiddleton4 Network Guru Member

    Just added my suggestions to the wish list post. Well then you make roadkill a squashed possum sandwich and send the bill to me.....
     
  65. boteeka

    boteeka LI Guru Member

    It's nice to see that my theme (a little bit modified) is included in this mod (Enlightened). Can't wait to try it at home. The new features' list over original Tomato is impressive.

    Big thumbs up, Victek!
     
  66. Victek

    Victek Network Guru Member

    Hi boteeka, slightly different tomato :), custom mod as I like, thanks for the contribution! :biggrin:
     
  67. Kiwi8

    Kiwi8 LI Guru Member

  68. Victek

    Victek Network Guru Member

    Kiwi8, ready, I was changing a defective HDD .. :thumbdown: SMART monitoring noticed too late .. well .. I'm still waiting the advice from this feature... LOL, restored contents, web ready. BTW .. finally after two weeks my site is "green light" under OpenDNS rules!!!

    [​IMG]
     
  69. Victek

    Victek Network Guru Member

    Toink, I prepared my next release, updated to SPeedMod 8502, I sent you PM with the link, I'll apreciate your feedback about PT problem.
     
  70. Ati

    Ati Network Guru Member

    Can i flash this firmware onto a Buffalo WHR-G125? Thanks!
     
  71. TexasFlood

    TexasFlood Network Guru Member

    Finally going to take the plunge, later today, and try the Tomato 1.19.8820 mod (I think that's the latest). I've put it off because there are a number of manual reconfigurations I need to do if I load this on my primary router. I have a lot of static IPs etc. Also plan to try dd-wrt v24 "final" on it, with TCP Vegas enabled and see what that's all about, :-D Once I get clean configurations on the different firmwares and back them up, I can switch around without a lot of sweat.
     
  72. TexasFlood

    TexasFlood Network Guru Member

    I had put your site on my white list, guess I'll try removing that and see if it works.
     
  73. Toink

    Toink Network Guru Member

    Hi! I don't have your PM. For some reason linksysinfo.org went down when I was about to log in and check your PM for the link.

    Please re-send. Thanks! :)
     
  74. jsmiddleton4

    jsmiddleton4 Network Guru Member

    Now that's just cruel. Announce a new release 8820 but only via pm? I mean did you want to stab us in the hearts and laugh loudly in the dark?

    Hopefully port forwarding is working and we'll see it for us common folks soon.....
     
  75. Toink

    Toink Network Guru Member

    Hi! Please don't feel bad. I believe, it's a "dog food" in response to my earlier post.

    Perhaps it's Victek's intention for me to test it first before he releases it for public consumption. :wink:
     
  76. boteeka

    boteeka LI Guru Member

    It would be nice to have alternative download locations, because RapidShare sucks. I'm trying to figure out those stupid CAPTCHA images for an hour now, with no luck yet.
     
  77. gingernut

    gingernut LI Guru Member

  78. Victek

    Victek Network Guru Member

    Hi, don't feel bad, I would like to test if the PT (not PF) problem reported by toink is solved after update to SPeedmod 8502, I think is the best way before spread one release with same problem. I hope you understood that if we get a positive answer from him then the release will be public. Gotcha? :) :biggrin:

    and.. 8820 is the present release, no other version was released after, read some post before, you have the link.
     
  79. jsmiddleton4

    jsmiddleton4 Network Guru Member

    Was kidding of course. Is this release "released" then? While I appreciate folks making stuff available for d/l, I do prefer to wait to make sure things are officially released for consumption.....
     
  80. boteeka

    boteeka LI Guru Member


    Thanks gingernut, greatly appreciated.

    Now, could somebody explain what are the new features and how to use them? I would be especially interested in IP/MAC QoS and ARP binding. I think it isn't just me who doesn't know these things. I would really appreciate such an effort.
     
  81. GhaladReam

    GhaladReam Network Guru Member

    Victek,

    Does your Tomato Mod include the "ND" wireless drivers? If so, would it be possibile for you to include a version without them? I'm having issues when wireless clients are connected, wheras I didn't before I upgraded to your FW. I had similar issues the first time I tried the "ND" official firmware a while back.
     
  82. Victek

    Victek Network Guru Member

    Hi, no, the mod use

    eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.38.0
    eth1: Broadcom BCM4320 802.11 Wireless Controller 3.90.38.0

    You can check it in the log view option.
     
  83. Victek

    Victek Network Guru Member

    Please read the post which opened this thread, you have a detailed description what's included.
    IP/QoS is self explanatory, setup rate for each IP, ceiling for the same IP and priority, It's an alternate way to QoS per application but in this case per individual IP, simple but effective.
     
  84. Victek

    Victek Network Guru Member

    Well, I got feedback from Toink that the Port Trigger is solved after update to SpeedMod 8502, then I updated some other sections of the mod

    BusyBox 1.10.2 patched 31May '08
    Speedmod 8502

    shake... test... enjoy! .. the Tomato RAF 1.19.8830 is ready for download.:biggrin:

    http://rapidshare.com/files/119970311/TomatoRAF_1.19.8830.zip
     
  85. jsmiddleton4

    jsmiddleton4 Network Guru Member

    Installed 8830. Not getting IP/DNS from my cable modem to the primary router. Tried everything, all the tricks. Sits there "renewing....".
     
  86. jsmiddleton4

    jsmiddleton4 Network Guru Member

    Back to 8820, no problems with cable modem/ip/dns/etc. Something missed in 8830? Some option?
     
  87. TexasFlood

    TexasFlood Network Guru Member

    I got a WAN IP just fine, Comcast cable. I reset and re-entered all my settings manually. But can't save the Advanced -> DHCP / DNS page settings, get an error on page, in both IE and Firefox.
     
  88. jsmiddleton4

    jsmiddleton4 Network Guru Member

    I tried everything Texas. Just sat there saying "Renewing..." Reloaded 8820, ip/dns/etc. popped right up and was on-line fine.

    I left 8830 on an AP and a slave WDS router and just went into the advanced/dns page and tried to save something. I get error in IE6, IE7 and Fire Fox. So something isn't right. Some option left out when compiled, something not checked when compiled, something that isn't quite right.

    Back to 8820 on all routers.
     
  89. TexasFlood

    TexasFlood Network Guru Member

    Did you reset to defaults or upgrade from 8820? I didn't upgrade as my primary router had DD-WRT v24 final VINT so wasn't really an option. I don't think that "regular" Tomato requires resets on upgrades but not sure about this build.
     
  90. jsmiddleton4

    jsmiddleton4 Network Guru Member

    texas...

    I tried everything. Something's not quite right with the 8830 version.

    Jim
     
  91. TexasFlood

    TexasFlood Network Guru Member

    I don't have a saved 8820 config to fall back to, wonder if I can just fall back withoiut reseting? Think I'll try and see what happens. If it doesn't work maybe I'll head back to dd-wrt for a bit and do some testing with TCP Vegas enabled.
     
  92. jsmiddleton4

    jsmiddleton4 Network Guru Member

    Worth trying Texas.
     
  93. TexasFlood

    TexasFlood Network Guru Member

    Hah, went to 8820 without reseting. The Advanced -> DHCP / DNS page worked fine on 8820, so I entered my settings and then popped back to 8830 without reseting. Think I'll try 8830 for a while after all.
     
  94. jsmiddleton4

    jsmiddleton4 Network Guru Member

    So you loaded it twice and inbetween went back to 8820? And it works now?

    I have a difficult time putting a firmware inplace for working routers that I know has problems. On a test router, sure no problem. But for routers that are working routers I'm not going to take a risk knowing there are issues even if minor issues. When something isn't right, I don't trust it that much.
     
  95. TexasFlood

    TexasFlood Network Guru Member

    I hear you.

    I was going to bail on it if I couldn't at least tick on "Intercept DNS Port" and hopefully enter my Dnsmasq Custom Configuration options. Wanted to make sure there is no way around going through my OpenDNS filters, :-D Come to think of it though, there is even a way around that. DD-WRT doesn't have that tick box so I use a couple of iptables rules which I could have used with Tomato as well. But now I'm just getting silly, ;-)

    Now I got that stuff entered and it seems to be working well enough for now. Save on the Advanced -> DHCP / DNS page does seem broken in 8830 so I can't edit those options but should be OK for now. Think I'll leave it for now and take a look at it but I have tested functional saved configs that I can fall back to pretty quickly if I have any problems
     
  96. Kiwi8

    Kiwi8 LI Guru Member

    Can u use an alternative source than rapidshare? It's not friendly to the non-premium downloaders :redface:
     
  97. Toink

    Toink Network Guru Member

    Here's another link. Use of a download manager is encouraged.
     
  98. Kiwi8

    Kiwi8 LI Guru Member

  99. Victek

    Victek Network Guru Member

    Detected the problem on DNS menu page, you can live with it till 1.20 version or going back to 1.19.8820, only minor changes for BusyBox patches are added. I'll apreciate do not create alternate downloads because it will be a mess of links and sources for each version.
    In any case I leave 1.19 with release 1.19.8825 as the stable versión links are:

    http://rapidshare.com/files/119743831/TomatoRAF1.19.8825.7z

    or in

    http://victek.is-a-geek.com you can find the last release with the DNS typo corrected. (8835)

    Thanks and see you on 1.20 :biggrin:
     
  100. cHarOn

    cHarOn Network Guru Member

    hello victek and on this firmware now portforwarding works? because your page dont tells us this :) because there is an old info there?
     
Thread Status:
Not open for further replies.

Share This Page