1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato 1.22(ND) unofficial SpeedMod compiles available

Discussion in 'Tomato Firmware' started by rhester72, Nov 19, 2008.

  1. rhester72

    rhester72 Network Guru Member

  2. mstombs

    mstombs Network Guru Member

    A new wireless driver with multi-SSID?
     
  3. rhester72

    rhester72 Network Guru Member

    OK, maybe not that special. ;) (It's not that I didn't try, mind you - but forward-porting Tomato to a later kernel is slightly more irritating and less enjoyable than a root canal during a medieval torture session while drowning. Upside-down. While drunk.)

    Rodney
     
  4. mstombs

    mstombs Network Guru Member

    Some folk may like that...

    Its just that if you search for corerev you find on dd-wrt that

    I didn't know where to start to find the wireless driver in for example "WGR614L MyOpenRouter Independent Firmware Build 4.139.6.2" which seems to be running a similar kernel rev to tomato.
     
  5. Victek

    Victek Network Guru Member

    It's on WRT160N v1 source code :) running also 2.4.20 kernel, wireless driver broadcom-wl-4.150.10.5.16, but the existing drivers support multiple BSSID already

    nvram get wl0_corerev = 9
     
  6. Dashiell

    Dashiell Network Guru Member

    Vic, will your Tomato 1.22 mod be running on the newer Linux kernel? ;)
     
  7. Victek

    Victek Network Guru Member

    2.4.20 is already the stock kernel for Tomato.

    Cheers :biggrin:
     
  8. humba

    humba Network Guru Member

    An ajax gui for firewall configuration (add/update/remove rules, move order, that kind of stuff)? that would make Tomato extremely unique.
     
  9. Toastman

    Toastman Super Moderator Staff Member Member

    Now you got everybody guessing :biggrin:
     
  10. rhester72

    rhester72 Network Guru Member

    Erm...guys, it was Vegas.

    Rodney
     

Share This Page