1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato 1.25.8515 .5 ND ThorMOD cutting WiFi after mounting partitions or starting lighttpd

Discussion in 'Tomato Firmware' started by kamatschka, Apr 6, 2010.

  1. kamatschka

    kamatschka Network Guru Member

    Hi there!

    I managed to install lighttpd on my WRT54GS v1.1. from the DDWRT-Repositories.
    I am using a SDCARD-Mod with a SDCARD formatted with ext3. After mounting a partition e.g. to /opt it happens very often that the router is disabling the WiFi connection. I then need to connect the router throug LAN to activate WiFi. This issue is more a problem because WiFi gets also often cut after starting lighttpd or after accessing a page whis is hosted through lighttpd .

    And another issue is that the hosted pages from lighttpd arent accessible from the Internet. I configured the lighttpd.conf so that it is listening on port 80 and I forwarded port 80 to 127.0.0.1 but it isnt accessible from the Internet.

    Can somebody help me with my issues? I hope someone has some infos regarding this.


    Thank you in advance.

    kamatschka
     
  2. kamatschka

    kamatschka Network Guru Member

    sooo. I tested my router with
    disabled dhcp server -> the Issue remains
    WifiChannel changed -> Issue remains


    I started to provoke the disabling of WiFi on my Router and then I got the Log File:

    Code:
    Jan  1 01:00:09 tomato syslog.info syslogd started: BusyBox v1.14.2
    Jan  1 01:00:09 tomato authpriv.info dropbear[76]: Running in background
    Jan  1 01:00:09 tomato user.notice kernel: klogd started: BusyBox v1.14.2 (2009-07-09 14:54:24 EEST)
    Jan  1 01:00:09 tomato user.warn kernel: CPU revision is: 00029007
    Jan  1 01:00:09 tomato user.warn kernel: Primary instruction cache 8kb, linesize 16 bytes (2 ways)
    Jan  1 01:00:09 tomato user.warn kernel: Primary data cache 4kb, linesize 16 bytes (2 ways)
    Jan  1 01:00:09 tomato user.warn kernel: Linux version 2.4.20 (@thor-laptop) (gcc version 3.2.3 with Broadcom modifications) #1 Thu Jul 9 14:58:52 EEST 2009
    Jan  1 01:00:09 tomato user.warn kernel: Determined physical RAM map:
    Jan  1 01:00:09 tomato user.warn kernel:  memory: 02000000 @ 00000000 (usable)
    Jan  1 01:00:09 tomato user.warn kernel: On node 0 totalpages: 8192
    Jan  1 01:00:09 tomato user.warn kernel: zone(0): 8192 pages.
    Jan  1 01:00:09 tomato user.warn kernel: zone(1): 0 pages.
    Jan  1 01:00:09 tomato user.warn kernel: zone(2): 0 pages.
    Jan  1 01:00:09 tomato user.warn kernel: Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
    Jan  1 01:00:09 tomato user.warn kernel: CPU: BCM4712 rev 2 at 216 MHz
    Jan  1 01:00:09 tomato user.warn kernel: Calibrating delay loop... 212.17 BogoMIPS
    Jan  1 01:00:09 tomato user.info kernel: Memory: 30620k/32768k available (1385k kernel code, 2148k reserved, 108k data, 64k init, 0k highmem)
    Jan  1 01:00:09 tomato user.info kernel: Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Jan  1 01:00:09 tomato user.info kernel: Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Jan  1 01:00:09 tomato user.warn kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Jan  1 01:00:09 tomato user.warn kernel: Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Jan  1 01:00:09 tomato user.warn kernel: Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    Jan  1 01:00:09 tomato user.warn kernel: Checking for 'wait' instruction...  unavailable.
    Jan  1 01:00:09 tomato user.warn kernel: POSIX conformance testing by UNIFIX
    Jan  1 01:00:09 tomato user.warn kernel: PCI: Disabled
    Jan  1 01:00:09 tomato user.warn kernel: PCI: Fixing up bus 0
    Jan  1 01:00:09 tomato user.info kernel: Linux NET4.0 for Linux 2.4
    Jan  1 01:00:09 tomato user.info kernel: Based upon Swansea University Computer Society NET3.039
    Jan  1 01:00:09 tomato user.warn kernel: Initializing RT netlink socket
    Jan  1 01:00:09 tomato user.warn kernel: Starting kswapd
    Jan  1 01:00:09 tomato user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    Jan  1 01:00:09 tomato user.info kernel: devfs: boot_options: 0x1
    Jan  1 01:00:09 tomato user.info kernel: squashfs: version 3.0 (2006/03/15) Phillip Lougher
    Jan  1 01:00:09 tomato user.warn kernel: pty: 256 Unix98 ptys configured
    Jan  1 01:00:09 tomato user.info kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
    Jan  1 01:00:09 tomato user.info kernel: ttyS00 at 0xb8000300 (irq = 3) is a 16550A
    Jan  1 01:00:09 tomato user.info kernel: ttyS01 at 0xb8000400 (irq = 0) is a 16550A
    Jan  1 01:00:09 tomato user.warn kernel: HDLC line discipline: version $Revision: 1.1.1.4 $, maxframe=4096
    Jan  1 01:00:09 tomato user.info kernel: N_HDLC line discipline registered.
    Jan  1 01:00:09 tomato user.info kernel: PPP generic driver version 2.4.2
    Jan  1 01:00:09 tomato daemon.info pppoe[69]: Received LCP Configuration-Request
    Jan  1 01:00:09 tomato daemon.info pppoe[69]: Sending LCP Configuration-Ack
    Jan  1 01:00:09 tomato daemon.info pppoe[69]: Received LCP Configuration-Ack
    Jan  1 01:00:09 tomato user.debug kernel: Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
    Jan  1 01:00:09 tomato user.debug kernel: Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
    Jan  1 01:00:09 tomato user.debug kernel: Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
    Jan  1 01:00:09 tomato user.debug kernel: number of CFI chips: 1
    Jan  1 01:00:09 tomato user.debug kernel: 0: offset=0x0,size=0x20000,blocks=64
    Jan  1 01:00:09 tomato user.notice kernel: Flash device: 0x800000 at 0x1c000000
    Jan  1 01:00:09 tomato user.notice kernel: Creating 5 MTD partitions on "Physically mapped flash":
    Jan  1 01:00:09 tomato user.notice kernel: 0x00000000-0x00040000 : "pmon"
    Jan  1 01:00:09 tomato user.notice kernel: 0x00040000-0x007e0000 : "linux"
    Jan  1 01:00:09 tomato user.notice kernel: 0x000e8ab8-0x00400000 : "rootfs"
    Jan  1 01:00:09 tomato user.notice kernel: 0x00400000-0x007e0000 : "jffs2"
    Jan  1 01:00:09 tomato user.notice kernel: 0x007e0000-0x00800000 : "nvram"
    Jan  1 01:00:09 tomato user.err kernel: sflash: found no supported devices
    Jan  1 01:00:09 tomato user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
    Jan  1 01:00:09 tomato user.info kernel: IP Protocols: ICMP, UDP, TCP, IGMP
    Jan  1 01:00:09 tomato user.info kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
    Jan  1 01:00:09 tomato user.info kernel: TCP: Hash tables configured (established 2048 bind 4096)
    Jan  1 01:00:09 tomato user.info kernel: Linux IP multicast router 0.06 plus PIM-SM
    Jan  1 01:00:09 tomato user.warn kernel: ip_conntrack version 2.1 (16384 buckets, 8192 max) - 368 bytes per conntrack
    Jan  1 01:00:09 tomato user.warn kernel: ip_tables: (C) 2000-2002 Netfilter core team
    Jan  1 01:00:09 tomato user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    Jan  1 01:00:09 tomato user.info kernel: NET4: Ethernet Bridge 008 for NET4.0
    Jan  1 01:00:09 tomato user.alert kernel: 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
    Jan  1 01:00:09 tomato user.alert kernel: All bugs added by David S. Miller <davem@redhat.com>
    Jan  1 01:00:09 tomato user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
    Jan  1 01:00:09 tomato user.info kernel: Mounted devfs on /dev
    Jan  1 01:00:09 tomato user.info kernel: Freeing unused kernel memory: 64k freed
    Jan  1 01:00:09 tomato user.warn kernel: Algorithmics/MIPS FPU Emulator v1.5
    Jan  1 01:00:09 tomato user.warn kernel: ip_conntrack_pptp version 1.9 loaded
    Jan  1 01:00:09 tomato user.warn kernel: ip_nat_pptp version 1.5 loaded
    Jan  1 01:00:09 tomato user.warn kernel: ip_conntrack_rtsp v0.01 loading
    Jan  1 01:00:09 tomato user.warn kernel: ip_nat_rtsp v0.01 loading
    Jan  1 01:00:09 tomato user.warn kernel: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.158.4.0
    Jan  1 01:00:09 tomato user.warn kernel: eth1: Broadcom BCM4320 802.11 Wireless Controller 4.158.4.0
    Jan  1 01:00:09 tomato user.warn kernel: tomato_ct.c [Jul  9 2009 15:01:23]
    Jan  1 01:00:09 tomato user.info kernel: vlan0: dev_set_promiscuity(master, 1)
    Jan  1 01:00:09 tomato user.info kernel: device eth0 entered promiscuous mode
    Jan  1 01:00:09 tomato user.info kernel: device vlan0 entered promiscuous mode
    Jan  1 01:00:09 tomato user.info kernel: device eth1 entered promiscuous mode
    Jan  1 01:00:09 tomato user.info kernel: br0: port 2(eth1) entering learning state
    Jan  1 01:00:09 tomato user.info kernel: br0: port 1(vlan0) entering learning state
    Jan  1 01:00:09 tomato user.warn kernel: vlan1: Setting MAC address to  00 14 bf 16 26 66.
    Jan  1 01:00:09 tomato user.info kernel: br0: port 2(eth1) entering forwarding state
    Jan  1 01:00:09 tomato user.info kernel: br0: topology change detected, propagating
    Jan  1 01:00:09 tomato user.info kernel: br0: port 1(vlan0) entering forwarding state
    Jan  1 01:00:09 tomato user.info kernel: br0: topology change detected, propagating
    Jan  1 01:00:09 tomato daemon.info pppoe[69]: CHAP authentication succeeded.
    Jan  1 01:00:09 tomato daemon.info pppoe[69]: Sending IPCP Configuration-Request
    Jan  1 01:00:09 tomato daemon.info pppoe[69]: Received IPCP Configuration-Request
    Jan  1 01:00:09 tomato daemon.info pppoe[69]: Sending IPCP Configuration-Ack
    Jan  1 01:00:09 tomato daemon.info pppoe[69]: Received IPCP Configuration-Nak
    Jan  1 01:00:09 tomato daemon.info pppoe[69]: Sending IPCP Configuration-Request
    Jan  1 01:00:09 tomato daemon.info pppoe[69]: Received IPCP Configuration-Ack
    Jan  1 01:00:09 tomato daemon.notice pppoe[69]: Connected.
    Jan  1 01:00:09 tomato daemon.notice pppoe[69]: IP Address: 85.176.107.165
    Jan  1 01:00:09 tomato daemon.notice pppoe[69]: DNS Address: 213.191.74.11, 213.191.92.82
    Jan  1 01:00:10 tomato user.info kernel: [INF] mmc: Version: 2.0.1  Parms: major=121 din=5 dout=4 clk=3 cs=7 maxsec=32 rahead=2 dbg=0001
    Jan  1 01:00:10 tomato user.info kernel: [DBG] mmc: init: power on/insertion initialization...
    Jan  1 01:00:10 tomato user.info kernel: [DBG] mmc: init: CMD0 - reset...
    Jan  1 01:00:10 tomato user.info kernel: [DBG] mmc: init SD: CMD8 - CIC voltage range check...
    Jan  1 01:00:10 tomato user.info kernel: [DBG] mmc: init SD: CMD58 - OCR voltage range check...
    Jan  1 01:00:10 tomato user.info kernel: [DBG] mmc: init SD: ACMD41 - card initialization...
    Jan  1 01:00:10 tomato user.info kernel: [DBG] mmc: init SD: CMD58 - Card Capacity Status check...
    Jan  1 01:00:10 tomato user.info kernel: [DBG] mmc: init SD: CMD10 - Card Identification Register read...
    Jan  1 01:00:10 tomato user.info kernel: [DBG] mmc: init SD: CMD9 - Card Specific Data read...
    Jan  1 01:00:10 tomato user.info kernel: [DBG] mmc: init SD: ACMD51 - SD Config Register read...
    Jan  1 01:00:10 tomato user.info kernel: [INF] mmc: SD Card detected & initialized
    Jan  1 01:00:10 tomato user.info kernel: [DBG] mmc: init - CMD16 - set 512 byte blocksize...
    Jan  1 01:00:10 tomato user.info kernel: Partition check:
    Jan  1 01:00:10 tomato user.info kernel:  mmca: p1 p2 p3
    Jan  1 01:00:10 tomato user.info kernel: [INF] mmc: Module loaded
    Jan  1 01:00:10 tomato user.info kernel: Journalled Block Device driver loaded
    Jan  1 01:00:10 tomato user.info kernel: kjournald starting.  Commit interval 5 seconds
    Jan  1 01:00:10 tomato user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
    Jan  1 01:00:10 tomato user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on mmc(121,3), internal journal
    Jan  1 01:00:10 tomato user.info kernel: EXT3-fs: recovery complete.
    Jan  1 01:00:10 tomato user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    Jan  1 01:00:11 tomato daemon.info dnsmasq[96]: started, version 2.49 cachesize 8192
    Jan  1 01:00:11 tomato daemon.info dnsmasq[96]: compile time options: no-IPv6 GNU-getopt no-RTC no-DBus no-I18N DHCP no-TFTP
    Jan  1 01:00:11 tomato daemon.info dnsmasq[96]: asynchronous logging enabled, queue limit is 5 messages
    Jan  1 01:00:11 tomato daemon.info dnsmasq[96]: reading /etc/resolv.dnsmasq
    Jan  1 01:00:11 tomato daemon.info dnsmasq[96]: using nameserver 85.88.19.11#53
    Jan  1 01:00:11 tomato daemon.info dnsmasq[96]: using nameserver 85.88.19.10#53
    Jan  1 01:00:11 tomato daemon.info dnsmasq[96]: read /etc/hosts - 0 addresses
    Jan  1 01:00:11 tomato daemon.info dnsmasq[96]: read /etc/hosts.dnsmasq - 1 addresses
    Jan  1 01:00:11 tomato user.info init[1]: Tomato 1.25.8515 .5 RAF ND Thor MOD .7
    Jan  1 01:00:11 tomato cron.err crond[100]: crond (busybox 1.14.2) started, log level 9
    Jan  1 01:00:12 tomato user.info init[1]: Linksys WRT54G/GS/GL
    Jan  1 01:00:12 tomato daemon.info dnsmasq[96]: exiting on receipt of SIGTERM
    Jan  1 01:00:12 tomato daemon.info dnsmasq[108]: started, version 2.49 cachesize 8192
    Jan  1 01:00:12 tomato daemon.info dnsmasq[108]: compile time options: no-IPv6 GNU-getopt no-RTC no-DBus no-I18N DHCP no-TFTP
    Jan  1 01:00:12 tomato daemon.info dnsmasq[108]: asynchronous logging enabled, queue limit is 5 messages
    Jan  1 01:00:12 tomato daemon.info dnsmasq[108]: reading /etc/resolv.dnsmasq
    Jan  1 01:00:12 tomato daemon.info dnsmasq[108]: using nameserver 85.88.19.11#53
    Jan  1 01:00:12 tomato daemon.info dnsmasq[108]: using nameserver 85.88.19.10#53
    Jan  1 01:00:12 tomato daemon.info dnsmasq[108]: read /etc/hosts - 0 addresses
    Jan  1 01:00:12 tomato daemon.info dnsmasq[108]: read /etc/hosts.dnsmasq - 1 addresses
    Jan  1 01:00:16 tomato daemon.notice miniupnpd[148]: HTTP listening on port 1024
    Apr  7 14:56:14 tomato user.info ntpc[150]: Time Updated: Wed, 07 Apr 2010 14:56:14 +0200 [+1270644958.071s]
    Apr  7 14:56:17 tomato user.info kernel: kjournald starting.  Commit interval 5 seconds
    Apr  7 14:56:17 tomato user.info kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on mmc(121,2), internal journal
    Apr  7 14:56:17 tomato user.info kernel: EXT3-fs: recovery complete.
    Apr  7 14:56:17 tomato user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
    Apr  7 14:56:18 tomato user.info buttons[26]: SES pushed. Count was 1.
    Apr  7 14:57:00 tomato cron.err crond[100]: time disparity of 21177416 minutes detected
    Apr  7 15:00:01 tomato syslog.info root: -- MARK --
    Apr  7 15:01:12 tomato auth.info login[383]: root login on 'pts/0'
    Apr  7 15:04:44 tomato user.info buttons[26]: SES pushed. Count was 1.
    
    At the end of the Log FIle it says
    Code:
    tomato user.info buttons[26]: SES pushed. Count was 1.
    
    I have no SES-Button but it says it was pushed. and after that I the WifiConnection gets disabled on the Router (WLAN LED off and on the Tomato info Page the WIFI is shown disabled) .. I saw that before the Wifi gets disabled the DMZ LED is blinking and then both the DMZ and WIFI LEDs get off. DMZ is disabled so I wonder why the LED is blinking?


    And what does this mean? :

    Code:
    Apr  7 14:57:00 tomato cron.err crond[100]: time disparity of 21177416 minutes detected
    Can some help me with this issue? I dont want to go back to DD-WRT!

    Greetz kama
     

Share This Page