1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato 1.28 110 VPN - Shibby - WRT54GL - iptables problem

Discussion in 'Tomato Firmware' started by Tom243a, Jul 9, 2013.

  1. Tom243a

    Tom243a Reformed Router Member

    I have installed tomato (from Shibby) on WRT54GL and now i want to put some iptables to tomato to secure OpenVPN, but these rules allow each traffic and it make own iptables unusable:

    Code:
    Chain FORWARD (policy DROP 0 packets, 0 bytes)
    pkts bytes target    prot opt in    out    source              destination
    2555 2215K            all  --  *      *      0.0.0.0/0            0.0.0.0/0          account: network/netmask: 192.168.1.0/255.255.255.0 name: lan
        0    0 ACCEPT    all  --  br0    br0    0.0.0.0/0            0.0.0.0/0       
     
        0    0 DROP      all  --  *      *      0.0.0.0/0            0.0.0.0/0          state INVALID
     
      44  2256 TCPMSS    tcp  --  *      *      0.0.0.0/0            0.0.0.0/0          tcp flags:0x06/0x02 TCPMSS clamp to PMTU
    2518 2212K ACCEPT    all  --  *      *      0.0.0.0/0            0.0.0.0/0          state RELATED,ESTABLISHED
     
        0    0 wanin      all  --  ppp0  *      0.0.0.0/0            0.0.0.0/0       
     
      37  2555 wanout    all  --  *      ppp0    0.0.0.0/0            0.0.0.0/0       
     
      37  2555 ACCEPT    all  --  br0    *      0.0.0.0/0            0.0.0.0/0       
     
        0    0 upnp      all  --  ppp0  *      0.0.0.0/0            0.0.0.0/0  
    I know that with these commands it's possible to delete these rules with:
    "iptables -D FORWARD (number)" or "iptables --flush FORWARD"
    But is it possible to disable these rules without commands in WebGUI?
     

Share This Page