1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

tomato acting like a clean AP?

Discussion in 'Tomato Firmware' started by vf1000f, Oct 18, 2009.

  1. vf1000f

    vf1000f Addicted to LI Member

    Hi
    Is threre a way to set up tomato acting like a clean AP?
    If I use it like it is now, I cant communicate with cabled and wireless.
    I turn off wireless in tomato.
    I connect a clean AP to one of the lan ports everything is ok.
    I am using netsupport.
    I was hoping to get rid of the AP and replace it with a tomatorouter :)

    Anyone? Please...

    ----
    vf
     
  2. Dudeman456

    Dudeman456 LI Guru Member

    I am not sure that I understand, right now if you connect via WIFI to your Tomato router, you are unable to communicate with you any devices connected via Wired links?

    If not I apologize, Please further define Clean AP.
     
  3. vf1000f

    vf1000f Addicted to LI Member

    what i mean with clean AP;
    Just an AP no router inside.
    I am using SMC 300.
     
  4. SL83

    SL83 Addicted to LI Member

    Turn off the DHCP server?

    So it acts like a wireless switch?
     
  5. ntest7

    ntest7 Network Guru Member

    Set the WAN port to "Disabled" and uncheck the DHCP Server box.

    If you have a recent version of tomato, you can check the "Use WAN port for LAN", otherwise plug your network into one of the LAN ports.
     
  6. vf1000f

    vf1000f Addicted to LI Member

    Done. Trouble is ; no internet.
    It seems like its a block in my linksys, will not get adresses from my next router.
     

Share This Page