1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato by Shibby 102 - Despite changelog, still 22 bit netmask limitation

Discussion in 'Tomato Firmware' started by Flx01, Nov 25, 2012.

  1. Flx01

    Flx01 Serious Server Member


    I just installed the latest 102 tomato firmware on my linksys E3200, but have been forced to use an at least 22 bits netmask for my fixed IP address.
    I use the router as an access point/switch, on a network...
    I basically disabled the wan interface, and assigned a static IP to the lan IP, but it always complained about needing at least a netmask.
    Am I doing something wrong?
    Thanks for any help,
  2. kthaddock

    kthaddock Network Guru Member

    There is a limitation on Shibbys bulid to use 22 bit netmask. Switch to Toastman.
  3. shibby20

    shibby20 Network Guru Member

    in v102:
    - Remove limitation about 22 bits netmask


    This is only a WARNING but you can ingnore them and click OK. BTW if you have WAN disabled, then you can disable also iptraffic. Then you will NOT have a limitation warning no more.

    btw toastman`s builds have also limitation but to 16 bits
    http://repo.or.cz/w/tomato.git/blob/refs/heads/Toastman-RT:/release/src/router/www/basic-network.asp line258.

    In my v102 you can also set netmast 8bits (or even smaller) right now.

Share This Page