1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato for Ralink devices

Discussion in 'Tomato Firmware' started by encore2097, Nov 27, 2009.

  1. encore2097

    encore2097 Network Guru Member

    A lot of the new routers are using Ralink chips as opposed to Broadcom. Would anyone be interested in working together to port/write firmware for these devices?

    I was initially looking into porting Tomato over to the ZyXEL NBG419N Wireless router as it has a 384 Mhz proc, 32mb ram, and 4mb flash.

    From a quick look at the firmware it runs the linux kernel, so hopefully source code will be made available upon request.
  2. donkey

    donkey Networkin' Nut Member

    yes, i would be very interested as i have a few Dlink DIR 615d's (also Ralink, specifically RT3052) but im new to firmware dev (although i built Gargoyle for one of my RT's), just noticed the date hope your still interested, hopefully.
  3. leandroong

    leandroong Addicted to LI Member

  4. donkey

    donkey Networkin' Nut Member

    initially i was wanting to help with porting Tomato over to Ralink boards and as i'm unaware of how to even start porting Tomato

    BTW: also looking at Padavan fw, and i dl src from here

Share This Page