1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato ND USB Mod with kernel 2.6 (Tomato-RT)

Discussion in 'Tomato Firmware' started by teddy_bear, Jan 8, 2010.

  1. Spyros

    Spyros LI Guru Member

    Format the JFFS partition then save
     
  2. dbt78

    dbt78 Networkin' Nut Member

    Yes ! They work well by turning in tomato. :smile:
    If both are checked, priority is given to the amber LED. ( the white LED is actually blue on the WRT320N )
     
  3. bake73

    bake73 LI Guru Member

    Anyone having problems with UPnP? doesn't work at all for me.
     
  4. spikes

    spikes Networkin' Nut Member

    teddy_bear,

    Having a BT client integrated in Tomato ND USB Mod is nice, but how about a newsgroup (usenet & nzb)client as well? Some people including myself do a lot of newsgroup downloading and not so much BT. Would like to see a newsgroup client support one day.
     
  5. though

    though Network Guru Member

    just wanted to chime in and say i've been using beta 14 pretty extensively for about 20 hours and it seems to be rock solid. uPNP seems to be working here. im using USB release on the N16.

    thanks teddy!
     
  6. bagu

    bagu Network Guru Member

    Doesn't work for me too
     
  7. though

    though Network Guru Member

    did you fire up a torrent or something to test it? remember you might have to hit refresh in the GUI to see the connections...

    it seems to be working on my wired static dhcp machine and via wireless dhcp machine....

    (the ports show being opened in tomato)
     
  8. i1135t

    i1135t Network Guru Member

    Hey all, I want to report a possible bug. I finally decided to upgrade to "MIPSR1" to test something for K26 with my Asus WL500GP v1 router. I did a nvram thorough erase, then 30/30/30, flashed using ASUS tool, then lastly a thorough erase again. Sometimes the soft erase doesn't clear it completely. It was successful and I started to configuring it from scratch. However, when I got to the "USB" option, I check all of the options available off (enabled all), and entered in my custom config to run some commands after mounting, and SAVED, it hung as if the router had a bad flash. (I did NOT have my usb thumb drive plugged in as well, but not sure if that made a difference). It took me some time trying to restore what seemed to be a "bricked" router, but managed to get it working again after playing with it somehow. Being that this could be a bug, I decided to restore back to K24 USB firmware. I was wondering if anyone else came across this bug?
     
  9. teddy_bear

    teddy_bear Network Guru Member

    bagu,
    Nothing works for you now (according to your PMs), so please don't mix apples with oranges and don't confuse others... When nothing works, don't expect just upnp to work :wink:... As for your particular problem, since nothing shows up in the logs, I can't guess what's really going on. Your iptables rules look ok.

    bake73,
    UPnP works (tested). If you have issues with it - post the DETAILS. Simply saying that something doesn't work is not enough to help you.
     
  10. bagu

    bagu Network Guru Member

    no, just upnp port forwarding and some dns problem but i have a net acces and ftp/usb and some other thing work...

    Can someone send me tomato-K26USB-1.27.9045MIPSR2-beta11-Ext.rar for comparison please ? (i delete it wrongly :S )

    no torrent in my office...
    B10 and 11 work fine...(exept RTSP but there is a bug)
     
  11. teddy_bear

    teddy_bear Network Guru Member

    Previous builds are still available on Sourceforge:
    http://sourceforge.net/projects/tomatousb/files/Rotten

    Can you provide additional info on the port forwarding not working for you? Is it just upnp or any port forwarding? How do you know it's not working (how do you test it)?
     
  12. bagu

    bagu Network Guru Member

    Thanks, i will try to compare the two build sysinfo and other params...
     
  13. bake73

    bake73 LI Guru Member

    Its not working for xbox 360 and transmission, its just not opening ports. pc and xbox are both static ip's set in tomato.
    dbt78/s wrt320n version works no problem.
     
  14. rhester72

    rhester72 Network Guru Member

    A better bet would be to look at the output of "iptables -t mangle" and "iptables -t nat" and see if you see the auto-forwarding rules present when registered. They are pretty obvious.

    Rodney
     
  15. mstombs

    mstombs Network Guru Member

    Great thanks - it now flashes during boot then goes steady - as it should, both from reboot and power cycle - no changes to nvram.

    Code:
    / # gpio poll
    Enable gpio mask: 0x0000
    0000FDFD 0.2345678.ABCDEF
    0000FDFD 0.2345678.ABCDEF
    0000FDFD 0.2345678.ABCDEF
    0000FDFD 0.2345678.ABCDEF
    0000FDFD 0.2345678.ABCDEF
    0000FDFD 0.2345678.ABCDEF
    0000FDFD 0.2345678.ABCDEF
    0000FDFD 0.2345678.ABCDEF
    left it flashing, but

    Code:
    / # gpio enable 1
    turned it on steady

    These commands make it flash and then steady


    Code:
    / # gpio disable 1
    / # gpio enable 1
    Code:
    / # led white on
    / # led white off
    control the SES lamp

    Thanks again teddy and dbt78

    except I crashed the router trying those commands above, not totally, but lost all the interfaces except eth0 and lo ... I think the gpio poll may have been an issue!
     
  16. bagu

    bagu Network Guru Member

    Okay, i have now find where are 2 of my 3 problems :
    Port forwading don't work because of an incorrect erase nvram (after 3 cycle erase/reboot, it work).
    Dns problem come from...my isp :S After using opendns + cleaning dns cache, everything revert to normal.

    The last thing is upnp : it still don't work.

    Will try to test deeply, but i have no more idea for the moment.
     
  17. tsanga

    tsanga Networkin' Nut Member

    Thanks! Worked like a charm.

    Unfortunately, after trying it out, I had to go back to DD-WRT. The latest DD-WRT build supports mixed N/G wireless network but I didn't realize Tomato is N-only right now. Too bad - my main router to my ISP is on Tomato and I would take its UI and simplicity over DD-WRT any day.
     
  18. though

    though Network Guru Member

    just put it on "Auto" and it will accept both G and N in tomato :)
     
  19. though

    though Network Guru Member

    teddy-

    i noticed in the beta 14 release, when set to N-only, G clients will not connect. i thought you stated in the past that N-only accepted G clients as well??
     
  20. teddy_bear

    teddy_bear Network Guru Member

    Of course it's not N-only. What is wrong with the "Auto" mode?? You're not the first one who doesn't see it :)...
    No, I never said that. "N-only" mode is what it says - N only ;). To accept all clients, including N and G, use "Auto".

    P.S. I don't know if "N/G" mode in DD-WRT does anything differently than "Auto". Supposedly, "N/G" should accept N and G clients only while filtering out B-clients. However, when I tried the same settings (and actually - any possible reasonable combination of nvram settings) with the wireless driver used in Tomato, it worked exactly the same as "Auto", i.e. accepting B-clients as well...
     
  21. gjcomputer

    gjcomputer Addicted to LI Member

    ptp VPN issue...

    here is our setup
    Tomato VPN router setup with static ip as server Asus WL-500gP v2
    tun \ udp vpn server with TLS

    Tomato VPN (dhcp) client Asus RT-N16
    running beta 13(?) (previous release) worked great
    upgraded to beta 14 and now the VPN will connect, and the client is visible on the server router but as soon as there is data transfer between the 2 routers the client router losses connection, and we lose connection... start with WAN is unchecked and after regaining connection the VPN is stopped on the client. i have tried reloading the firmware without usb and did another factory reset with same results.

    the only change was upgrading to beta 14. are there any logs i can post to help diagnose? i looked in the standard logs and didnt see anything out of ordinary.
     
  22. tsanga

    tsanga Networkin' Nut Member

    Duh! :tongue:

    I'm new to the world of n wireless....
     
  23. spikes

    spikes Networkin' Nut Member

    Is it just me or can anyone else get the USB print server working with this version on the Asus RT-N16? My printer doesn't show up in the list of attached USB devices. I tried printing and nothing happens. Drivers and everything are already on my computer. I also have an Asus 520gu which works fine with the USB print server. Is there something different I have to do on this version?

    My old script to access my dsl modem behind the router no longer works with this version. I made sure I used the correct wan interface and ip address. This is what I have:

    ip addr add 192.168.1.10/24 dev vlan1 brd +
    /usr/sbin/iptables -I POSTROUTING -t nat -o vlan1 -d 192.168.1.0/24 -j MASQUERADE

    Typing 192.168.1.1 in the browser takes me to a page cannot be found. This script worked on the Asus 520gu but not the RT-N16.
     
  24. PanRatio

    PanRatio Networkin' Nut Member

    Hi.

    I have Netgear WNR3500 with beta 14. To router I plugget Linksys SPA3102. All works properly, but LED where is conected Linksys i always orange.

    It does not matter the Linksys is used or not - the LED is always orange.
     
  25. komugi

    komugi Addicted to LI Member

    I'm having an issue with the newest (beta 14 build-Extras/VPN) on Asus RT-N16. I am trying to get Remote Access to work from Windows Home Server (WHS), WHS detects that the UPNP is not working on the router (I have it enabled), while NAT-PMP is working. I just switched router yesterday from Buffalo WHR-HP-G54 (Tomato VPN build), and that was working fine.

    Is this a known issue?
     
  26. myersw

    myersw Network Guru Member

    There is a more generic command set for this a variable. Has been posted else where but here they are:
    ip addr add 10.0.0.3/30 dev $(nvram get wan_ifname) brd +

    iptables -I POSTROUTING -t nat -o $(nvram get wan_ifname) -d 10.0.0.0/30 -j MASQUERADE
    In my case the modem is IP 10.0.0.2, change the above to reflect your IP addresses. This works on my RT-N16 both the Asus firmware and TB Tomato.
    --bill
     
  27. teddy_bear

    teddy_bear Network Guru Member

    spikes,
    1. You didn't state your printer model, and what routers and firmware versions you had it working with...
    2. For RT-N16 you need to replace "vlan1" with "vlan2" (or with $(nvram get wan_ifname)) in your script.

    komugi,
    A few people reported UPNP not working with this build. However, it's working fine for me, and nobody provided any useful info for troubleshooting :frown:...
    Does "Port Forwarding -> UPNP/NAT-PMP" page show any ports being forwarded?
    Are iptables rules getting added properly? Post the output of the following command:
    Code:
    iptables -L -n; iptables -t nat -L -n
    Also post the output of the same command from the router/firmware which has everything working properly.
    That could be a starting point to investigate...
     
  28. ladysman

    ladysman LI Guru Member


    I will do this tonight. I thought I was having no problems but didn't realize (because we hadn't used them until last night) that the appleTV's won't connect to itunes. No firewall is on the computer (Windows one is also off). I can't blame the router but I will check it tonight. The message that itunes brings up is the ports aren't open.

    I have Static DHCP set for both AppleTV's and rules set to open certain ports for them (that apple states as necessary).

    I will do more troubleshooting tonight. not blaming the router though just yet teddy. :wink:

    Anything else you want us to try, let us know.
     
  29. skunkman

    skunkman Guest

    After used beta14 on my ASUS RT-N16. I found some problem on QOS function. I try to set bittorrent-pc to class D (Using mac address and port, same result). But bandwidth show in wrong class.
     

    Attached Files:

  30. komugi

    komugi Addicted to LI Member

    No, none of the UPNP are showing up for me, only the NAT-PMP forwarding shows up. I've masked my own IP, but other than that, this is the output for both the Asus RT-N16 (non-working UPNP) and WHR-HP-G54 (working UPNP)

    Tomato v1.27.9046 MIPSR2-beta14 K26 USB vpn3.6 (Asus RT-N16)
    Code:
    BusyBox v1.16.1 (2010-05-31 21:53:04 EDT) built-in shell (ash)
    Enter 'help' for a list of built-in commands.
    
    root@RT-485B3942B91D:/tmp/home/root# iptables -L -n; iptables -t nat -L -n
    Chain INPUT (policy DROP)
    target     prot opt source               destination
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp dpt:1195
    DROP       all  --  0.0.0.0/0            0.0.0.0/0           state INVALID
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0           state RELATED,ESTAB            LISHED
    shlimit    tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:22 state NE            W
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.1         tcp dpt:22
    
    Chain FORWARD (policy DROP)
    target     prot opt source               destination
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
    DROP       all  --  0.0.0.0/0            0.0.0.0/0           state INVALID
    TCPMSS     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp flags:0x06/0x02             TCPMSS clamp to PMTU
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0           state RELATED,ESTAB            LISHED
    wanin      all  --  0.0.0.0/0            0.0.0.0/0
    wanout     all  --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
    upnp       all  --  0.0.0.0/0            0.0.0.0/0
    
    Chain OUTPUT (policy ACCEPT)
    target     prot opt source               destination
    
    Chain shlimit (1 references)
    target     prot opt source               destination
               all  --  0.0.0.0/0            0.0.0.0/0           recent: SET name: s            hlimit side: source
    DROP       all  --  0.0.0.0/0            0.0.0.0/0           recent: UPDATE seco            nds: 60 hit_count: 3 name: shlimit side: source
    
    Chain upnp (1 references)
    target     prot opt source               destination
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:45654
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.120       udp dpt:45654
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:4570
    
    Chain wanin (1 references)
    target     prot opt source               destination
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:7111
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.120       udp dpt:7111
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:50050
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.120       udp dpt:50050
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:62332
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:62332
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:6126
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:6126
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:39000
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:39000
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:44121
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:44121
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:51669
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:51669
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:113
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpts:54000:5401            9
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.1         udp dpt:1195
    
    Chain wanout (1 references)
    target     prot opt source               destination
    Chain PREROUTING (policy ACCEPT)
    target     prot opt source               destination
    ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp dpt:1195
    DROP       all  --  0.0.0.0/0            192.168.1.0/24
    DNAT       icmp --  0.0.0.0/0            xxx.xxx.xxx.xxx      to:192.168.1.1
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      tcp dpt:557 to:192.            168.1.1:22
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      tcp dpt:7111 to:192            .168.1.120:7111
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      udp dpt:7111 to:192            .168.1.120:7111
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      tcp dpt:50000 to:19            2.168.1.120:50050
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      udp dpt:50000 to:19            2.168.1.120:50050
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      tcp dpt:62332 to:19            2.168.1.124:62332
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      udp dpt:62332 to:19            2.168.1.124:62332
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      tcp dpt:6126 to:192            .168.1.124:6126
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      udp dpt:6126 to:192            .168.1.124:6126
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      tcp dpt:39000 to:19            2.168.1.124:39000
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      udp dpt:39000 to:19            2.168.1.124:39000
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      tcp dpt:44121 to:19            2.168.1.124:44121
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      udp dpt:44121 to:19            2.168.1.124:44121
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      tcp dpt:51669 to:19            2.168.1.124:51669
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      udp dpt:51669 to:19            2.168.1.124:51669
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      tcp dpt:113 to:192.            168.1.124:113
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      tcp dpts:54000:5401            9 to:192.168.1.124
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx      udp dpt:1195 to:192            .168.1.1:1195
    upnp       all  --  0.0.0.0/0            xxx.xxx.xxx.xxx
    
    Chain POSTROUTING (policy ACCEPT)
    target     prot opt source               destination
    MASQUERADE  all  --  0.0.0.0/0            0.0.0.0/0
    SNAT       all  --  192.168.1.0/24       192.168.1.0/24      to:192.168.1.1
    
    Chain OUTPUT (policy ACCEPT)
    target     prot opt source               destination
    
    Chain upnp (1 references)
    target     prot opt source               destination
    DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:45654 to:19            2.168.1.120:45654
    DNAT       udp  --  0.0.0.0/0            0.0.0.0/0           udp dpt:45654 to:19            2.168.1.120:45654
    DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:4570 to:192            .168.1.120:4570
    
    
    Tomato v1.27vpn3.6 (Buffalo WHR-HP-G54)
    Code:
    BusyBox v1.14.4 (2010-01-31 21:34:54 CST) built-in shell (ash)
    Enter 'help' for a list of built-in commands.
    
    # iptables -L -n; iptables -t nat -L -n
    Chain INPUT (policy DROP)
    target     prot opt source               destination
    ACCEPT     0    --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp dpt:1195
    DROP       0    --  0.0.0.0/0            0.0.0.0/0           state INVALID
    ACCEPT     0    --  0.0.0.0/0            0.0.0.0/0           state RELATED,ESTAB            LISHED
    shlimit    tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:22 state NE            W
    ACCEPT     0    --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     0    --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.1         tcp dpt:22
    
    Chain FORWARD (policy DROP)
    target     prot opt source               destination
    ACCEPT     0    --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     0    --  0.0.0.0/0            0.0.0.0/0
    DROP       0    --  0.0.0.0/0            0.0.0.0/0           state INVALID
    TCPMSS     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp flags:0x06/0x02             tcpmss match 1461:65535 TCPMSS set 1460
    ACCEPT     0    --  0.0.0.0/0            0.0.0.0/0           state RELATED,ESTAB            LISHED
    wanin      0    --  0.0.0.0/0            0.0.0.0/0
    wanout     0    --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     0    --  0.0.0.0/0            0.0.0.0/0
    upnp       0    --  0.0.0.0/0            0.0.0.0/0
    
    Chain OUTPUT (policy ACCEPT)
    target     prot opt source               destination
    
    Chain shlimit (1 references)
    target     prot opt source               destination
               0    --  0.0.0.0/0            0.0.0.0/0           recent: SET name: s            hlimit side: source
    DROP       0    --  0.0.0.0/0            0.0.0.0/0           recent: UPDATE seco            nds: 60 hit_count: 3 name: shlimit side: source
    
    Chain upnp (1 references)
    target     prot opt source               destination
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:45654
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.120       udp dpt:45654
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:4570
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:8005
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:8087
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:80
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:443
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:4125
    
    Chain wanin (1 references)
    target     prot opt source               destination
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpts:54000:5401            9
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:113
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:44121
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:44121
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:51669
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:51669
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:3389
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:39000
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:39000
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:6126
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:6126
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:62332
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:62332
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.1         udp dpt:1195
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:7111
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.120       udp dpt:7111
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:50050
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.120       udp dpt:50050
    
    Chain wanout (1 references)
    target     prot opt source               destination
    Chain PREROUTING (policy ACCEPT)
    target     prot opt source               destination
    ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp dpt:1195
    DROP       0    --  0.0.0.0/0            192.168.1.0/24
    DNAT       icmp --  0.0.0.0/0            xxx.xxx.xxx.xxx        to:192.168.1.1
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        tcp dpt:557 to:192.            168.1.1:22
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        tcp dpts:54000:5401            9 to:192.168.1.124
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        tcp dpt:113 to:192.            168.1.124:113
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        tcp dpt:44121 to:19            2.168.1.124:44121
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        udp dpt:44121 to:19            2.168.1.124:44121
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        tcp dpt:51669 to:19            2.168.1.124:51669
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        udp dpt:51669 to:19            2.168.1.124:51669
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        tcp dpt:680 to:192.            168.1.124:3389
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        tcp dpt:39000 to:19            2.168.1.124:39000
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        udp dpt:39000 to:19            2.168.1.124:39000
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        tcp dpt:6126 to:192            .168.1.124:6126
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        udp dpt:6126 to:192            .168.1.124:6126
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        tcp dpt:62332 to:19            2.168.1.124:62332
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        udp dpt:62332 to:19            2.168.1.124:62332
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        udp dpt:1195 to:192            .168.1.1:1195
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        tcp dpt:7111 to:192            .168.1.120:7111
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        udp dpt:7111 to:192            .168.1.120:7111
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        tcp dpt:50000 to:19            2.168.1.120:50050
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx.xxx        udp dpt:50000 to:19            2.168.1.120:50050
    upnp       0    --  0.0.0.0/0            xxx.xxx.xxx.xxx
    
    Chain POSTROUTING (policy ACCEPT)
    target     prot opt source               destination
    MASQUERADE  0    --  0.0.0.0/0            0.0.0.0/0
    MASQUERADE  0    --  192.168.1.0/24       192.168.1.0/24
    
    Chain OUTPUT (policy ACCEPT)
    target     prot opt source               destination
    
    Chain upnp (1 references)
    target     prot opt source               destination
    DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:45654 to:19            2.168.1.120:45654
    DNAT       udp  --  0.0.0.0/0            0.0.0.0/0           udp dpt:45654 to:19            2.168.1.120:45654
    DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:4570 to:192            .168.1.120:4570
    DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:8005 to:192            .168.1.120:8005
    DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:8087 to:192            .168.1.120:8087
    DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:80 to:192.1            68.1.120:80
    DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:443 to:192.            168.1.120:443
    DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:4125 to:192            .168.1.120:4125
    
     
  31. teddy_bear

    teddy_bear Network Guru Member

    Thanks. It indeed looks like UPnP rules are not getting created at all - assuming you run the same clients for both tests...

    However, I can't reproduce the problem here - neither with uTorrent (configured for UPnP only, no NAT-PMP), nor with Microsoft Connectivity Test (http://www.microsoft.com/windows/using/tools/igd/default.mspx) - in both cases ports are getting forwarded properly.
    Can you try it with uTorrent and/or the Microsoft test as well to verify if the problem is specific for certain clients? By the way, are your UPnP clients wired or wireless?
     
  32. komugi

    komugi Addicted to LI Member

    The equipment are the same, all I did was swap the router and plugged it into my switch (which hard links everything else). My server is wired to a Gigabit switch, then routed to the router.

    I know uTorrent worked in the old router since it created the rules when I ran it. When I tried it just now, no rules are created.

    From Internet Connectivity Evaluation Tool
    Code:
    IGDEvaluators 
    Version. 1.3.5.0 - Report 
    
    
    Test 1 - Basic Internet Connectivity Test Supported  
    
    
    Result: 
    Trying to construct an open request to the webpage : /windows/using/tools/igd/StaticContent/igdprobedocs/connectivity/test.txt
    Successfully constructed an open request
    Trying to send the constructed open request
    Successfully sent the constructed open request
    Waiting for the response from the IGD test server
    Successfully received the response from the test server
    Querying the data size of the received content
    Successfully queried the data size of the received content
    Received 37 bytes of content from the IGD test server
    IPv4 Connectivity succeeds through the Internet Gateway Device
    
    
    
    --------------------------------------------------------------------------------
    
    Test 2 - Network Address Translator Type Supported  
    
    
    Result: 
    Trying to resolve the Teredo server IP address
    Primary Teredo server IP address: 65.55.158.118
    Secondary Terdeo server IP address: 65.55.158.119
    Starting exercise with primary Teredo server
    Sending a Router Solicitation frame with ConeBit on
    Waiting for Router Advertisement
    Sending a Router Solicitation frame with ConeBit on
    Waiting for Router Advertisement
    Sending a Router Solicitation frame with ConeBit on
    Waiting for Router Advertisement
    Sending a Router Solicitation frame with ConeBit off
    Waiting for Router Advertisement
    Received a Router Advertisement frame
    Starting exercise with secondary Teredo server
    Sending a Router Solicitation frame with ConeBit off
    Waiting for Router Advertisement frame
    Received a Router Advertisement frame
    The IGD's NAT type is RESTRICTED CONE
    
    
    
    --------------------------------------------------------------------------------
    
    Test 3 - Traffic Congestion Test Supported  
    
    
    Result: 
    Trying to load library nsi.dll
    ECN is disabled
    Turning on ECN for testing
    Trying to connect to the test server www.microsoft.com
    Successfully connected to the test server
    Fetching the webpage /windows/using/tools/igd/StaticContent/igdprobedocs/ecn/test.txt from the test server
    Received 28 bytes of content from the test server
    Restoring the original ECN settings
    Turning off ECN
    
    
    
    --------------------------------------------------------------------------------
    
    Test 4 - TCP High Performance Test Supported  
    
    
    Result: 
    Trying to load library nsi.dll
    The current Auto Tuning Level is set to Normal
    Trying to connect to the test server www.microsoft.com
    Successfully connected to the test server
    Testing with webpage /windows/using/tools/igd/StaticContent/igdprobedocs/ws/test13.txt of size 8192
    Fetching the webpage /windows/using/tools/igd/StaticContent/igdprobedocs/ws/test13.txt from the test server
    Received 8192 bytes of content from the test server
    Testing with webpage /windows/using/tools/igd/StaticContent/igdprobedocs/ws/test14.txt of size 16384
    Fetching the webpage /windows/using/tools/igd/StaticContent/igdprobedocs/ws/test14.txt from the test server
    Received 16384 bytes of content from the test server
    Testing with webpage /windows/using/tools/igd/StaticContent/igdprobedocs/ws/test16.txt of size 65536
    Fetching the webpage /windows/using/tools/igd/StaticContent/igdprobedocs/ws/test16.txt from the test server
    Received 65536 bytes of content from the test server
    
    
    
    --------------------------------------------------------------------------------
    
    Test 5 - UPnP Support Test Not supported  
    
    
    Result: 
    The operating system is Windows Vista
    The firewall is enabled
    Exceptions are allowed by the firewall
    UPnP is enabled by the firewall
    UPnP services are running
    UPnP Discovery is enabled
    Detecting Internet Gateway Devices on the network
    1 IGD(s) found
    IGD Device Information:
    Manufacturer Name : UPnP
    Model Name : UPnP router
    Model Number : 1
    4 existing port mappings were found: 
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 4571
    Internal Port : 4571
    Protocol : TCP
    Internal Client : 192.168.1.120
    Enabled : TRUE
    Description : NAT-PMP 99001508
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 4570
    Internal Port : 4570
    Protocol : TCP
    Internal Client : 192.168.1.120
    Enabled : TRUE
    Description : NAT-PMP 99001712
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 31658
    Internal Port : 31658
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : NAT-PMP 5385
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 31658
    Internal Port : 31658
    Protocol : TCP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : NAT-PMP 5385
    
    This test will add 16 port mappings to the IGD
    Using the local computer's IP address (192.168.1.138) for testing
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61464
    Internal Port : 61501
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme0
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61574
    Internal Port : 61616
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme1
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61697
    Internal Port : 61722
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme2
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61814
    Internal Port : 61788
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme3
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61913
    Internal Port : 61960
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme4
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61996
    Internal Port : 61976
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme5
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62072
    Internal Port : 62148
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme6
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62143
    Internal Port : 62208
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme7
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62246
    Internal Port : 62355
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme8
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62426
    Internal Port : 62380
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme9
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62468
    Internal Port : 62564
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme10
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62600
    Internal Port : 62659
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme11
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62690
    Internal Port : 62704
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme12
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62777
    Internal Port : 62779
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme13
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62865
    Internal Port : 62921
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme14
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62960
    Internal Port : 63041
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme15
    
    16 new port mappings have been added successfully
    There are 20 port mappings on the IGD
    Waiting for 60 seconds
    There are 20 Port Mappings on the IGD
    The following port mapping was not found on the IGD:
    
    ***********************************************************
    External Port : 4570
    Internal Port : 4570
    Protocol : TCP
    Internal Client : 192.168.1.120
    Enabled : TRUE
    Description : NAT-PMP 99001712
    
    The current port mappings on the IGD:
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 4571
    Internal Port : 4571
    Protocol : TCP
    Internal Client : 192.168.1.120
    Enabled : TRUE
    Description : NAT-PMP 99001508
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 31658
    Internal Port : 31658
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : NAT-PMP 5385
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 31658
    Internal Port : 31658
    Protocol : TCP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : NAT-PMP 5385
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 61464
    Internal Port : 61501
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme0
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 61574
    Internal Port : 61616
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme1
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 61697
    Internal Port : 61722
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme2
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 61814
    Internal Port : 61788
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme3
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 61913
    Internal Port : 61960
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme4
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 61996
    Internal Port : 61976
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme5
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 62072
    Internal Port : 62148
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme6
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 62143
    Internal Port : 62208
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme7
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 62246
    Internal Port : 62355
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme8
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 62426
    Internal Port : 62380
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme9
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 62468
    Internal Port : 62564
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme10
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 62600
    Internal Port : 62659
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme11
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 62690
    Internal Port : 62704
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme12
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 62777
    Internal Port : 62779
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme13
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 62865
    Internal Port : 62921
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme14
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 62960
    Internal Port : 63041
    Protocol : UDP
    Internal Client : 192.168.1.138
    Enabled : TRUE
    Description : removeme15
    
    
    ***********************************************************
    External IP Address : xxx.xxx.xxx.xxx
    External Port : 4570
    Internal Port : 4570
    Protocol : TCP
    Internal Client : 192.168.1.120
    Enabled : TRUE
    Description : NAT-PMP 99001832
    
    The current port mappings on the IGD do not match what we expected
    The current port mappings on the IGD:
    Deleting all the test port mappings from the IGD
    
    
    
    --------------------------------------------------------------------------------
    
    Test 6 - Multiple Simultaneous Connection States Test Supported  
    
    
    Result: 
    This test attempts to sustain 80 concurrent TCP sessions
    Opening TCP session test thread 0
    Opening TCP session test thread 1
    TCP Session test thread 0 is started
    TCP Session test thread 0 is starting to exchange data with the test server
    Opening TCP session test thread 2
    TCP Session test thread 1 is started
    TCP Session test thread 1 is starting to exchange data with the test server
    Opening TCP session test thread 3
    TCP Session test thread 2 is started
    TCP Session test thread 2 is starting to exchange data with the test server
    Opening TCP session test thread 4
    Opening TCP session test thread 5
    TCP Session test thread 4 is started
    TCP Session test thread 4 is starting to exchange data with the test server
    Opening TCP session test thread 6
    TCP Session test thread 5 is started
    TCP Session test thread 5 is starting to exchange data with the test server
    Opening TCP session test thread 7
    TCP Session test thread 6 is started
    TCP Session test thread 6 is starting to exchange data with the test server
    Opening TCP session test thread 8
    Opening TCP session test thread 9
    TCP Session test thread 8 is started
    TCP Session test thread 8 is starting to exchange data with the test server
    10 TCP session test threads are now running
    Waiting for 10 seconds
    TCP Session test thread 9 is started
    TCP Session test thread 9 is starting to exchange data with the test server
    TCP Session test thread 3 is started
    TCP Session test thread 3 is starting to exchange data with the test server
    TCP Session test thread 7 is started
    TCP Session test thread 7 is starting to exchange data with the test server
    Opening TCP session test thread 10
    Opening TCP session test thread 11
    TCP Session test thread 10 is started
    Opening TCP session test thread 12
    Opening TCP session test thread 13
    Opening TCP session test thread 14
    TCP Session test thread 10 is starting to exchange data with the test server
    Opening TCP session test thread 15
    TCP Session test thread 11 is started
    Opening TCP session test thread 16
    Opening TCP session test thread 17
    Opening TCP session test thread 18
    Opening TCP session test thread 19
    20 TCP session test threads are now running
    TCP Session test thread 12 is started
    Waiting for 10 seconds
    TCP Session test thread 11 is starting to exchange data with the test server
    TCP Session test thread 12 is starting to exchange data with the test server
    TCP Session test thread 14 is started
    TCP Session test thread 14 is starting to exchange data with the test server
    TCP Session test thread 13 is started
    TCP Session test thread 18 is started
    TCP Session test thread 15 is started
    TCP Session test thread 18 is starting to exchange data with the test server
    TCP Session test thread 15 is starting to exchange data with the test server
    TCP Session test thread 13 is starting to exchange data with the test server
    TCP Session test thread 16 is started
    TCP Session test thread 17 is started
    TCP Session test thread 16 is starting to exchange data with the test server
    TCP Session test thread 17 is starting to exchange data with the test server
    TCP Session test thread 19 is started
    TCP Session test thread 19 is starting to exchange data with the test server
    Opening TCP session test thread 20
    Opening TCP session test thread 21
    Opening TCP session test thread 22
    Opening TCP session test thread 23
    Opening TCP session test thread 24
    Opening TCP session test thread 25
    Opening TCP session test thread 26
    Opening TCP session test thread 27
    Opening TCP session test thread 28
    Opening TCP session test thread 29
    30 TCP session test threads are now running
    Waiting for 10 seconds
    TCP Session test thread 22 is started
    TCP Session test thread 22 is starting to exchange data with the test server
    TCP Session test thread 26 is started
    TCP Session test thread 26 is starting to exchange data with the test server
    TCP Session test thread 20 is started
    TCP Session test thread 20 is starting to exchange data with the test server
    TCP Session test thread 21 is started
    TCP Session test thread 21 is starting to exchange data with the test server
    TCP Session test thread 23 is started
    TCP Session test thread 23 is starting to exchange data with the test server
    TCP Session test thread 24 is started
    TCP Session test thread 24 is starting to exchange data with the test server
    TCP Session test thread 25 is started
    TCP Session test thread 25 is starting to exchange data with the test server
    TCP Session test thread 27 is started
    TCP Session test thread 27 is starting to exchange data with the test server
    TCP Session test thread 28 is started
    TCP Session test thread 28 is starting to exchange data with the test server
    TCP Session test thread 29 is started
    TCP Session test thread 29 is starting to exchange data with the test server
    Opening TCP session test thread 30
    Opening TCP session test thread 31
    TCP Session test thread 30 is started
    Opening TCP session test thread 32
    Opening TCP session test thread 33
    TCP Session test thread 30 is starting to exchange data with the test server
    Opening TCP session test thread 34
    Opening TCP session test thread 35
    Opening TCP session test thread 36
    Opening TCP session test thread 37
    Opening TCP session test thread 38
    Opening TCP session test thread 39
    TCP Session test thread 31 is started
    40 TCP session test threads are now running
    Waiting for 10 seconds
    TCP Session test thread 33 is started
    TCP Session test thread 31 is starting to exchange data with the test server
    TCP Session test thread 33 is starting to exchange data with the test server
    TCP Session test thread 34 is started
    TCP Session test thread 35 is started
    TCP Session test thread 34 is starting to exchange data with the test server
    TCP Session test thread 35 is starting to exchange data with the test server
    TCP Session test thread 37 is started
    TCP Session test thread 37 is starting to exchange data with the test server
    TCP Session test thread 38 is started
    TCP Session test thread 36 is started
    TCP Session test thread 38 is starting to exchange data with the test server
    TCP Session test thread 32 is started
    TCP Session test thread 32 is starting to exchange data with the test server
    TCP Session test thread 36 is starting to exchange data with the test server
    TCP Session test thread 39 is started
    TCP Session test thread 39 is starting to exchange data with the test server
    Opening TCP session test thread 40
    Opening TCP session test thread 41
    TCP Session test thread 40 is started
    TCP Session test thread 41 is started
    Opening TCP session test thread 42
    TCP Session test thread 40 is starting to exchange data with the test server
    Opening TCP session test thread 43
    TCP Session test thread 42 is started
    TCP Session test thread 41 is starting to exchange data with the test server
    TCP Session test thread 42 is starting to exchange data with the test server
    Opening TCP session test thread 44
    Opening TCP session test thread 45
    TCP Session test thread 43 is started
    TCP Session test thread 44 is started
    Opening TCP session test thread 46
    TCP Session test thread 45 is started
    TCP Session test thread 43 is starting to exchange data with the test server
    Opening TCP session test thread 47
    TCP Session test thread 45 is starting to exchange data with the test server
    Opening TCP session test thread 48
    TCP Session test thread 46 is started
    TCP Session test thread 47 is started
    TCP Session test thread 44 is starting to exchange data with the test server
    TCP Session test thread 46 is starting to exchange data with the test server
    TCP Session test thread 48 is started
    TCP Session test thread 48 is starting to exchange data with the test server
    Opening TCP session test thread 49
    TCP Session test thread 47 is starting to exchange data with the test server
    50 TCP session test threads are now running
    Waiting for 10 seconds
    TCP Session test thread 49 is started
    TCP Session test thread 49 is starting to exchange data with the test server
    Opening TCP session test thread 50
    Opening TCP session test thread 51
    TCP Session test thread 50 is started
    Opening TCP session test thread 52
    Opening TCP session test thread 53
    TCP Session test thread 50 is starting to exchange data with the test server
    Opening TCP session test thread 54
    TCP Session test thread 51 is started
    Opening TCP session test thread 55
    Opening TCP session test thread 56
    TCP Session test thread 51 is starting to exchange data with the test server
    Opening TCP session test thread 57
    Opening TCP session test thread 58
    Opening TCP session test thread 59
    60 TCP session test threads are now running
    Waiting for 10 seconds
    TCP Session test thread 53 is started
    TCP Session test thread 53 is starting to exchange data with the test server
    TCP Session test thread 52 is started
    TCP Session test thread 54 is started
    TCP Session test thread 54 is starting to exchange data with the test server
    TCP Session test thread 52 is starting to exchange data with the test server
    TCP Session test thread 57 is started
    TCP Session test thread 57 is starting to exchange data with the test server
    TCP Session test thread 55 is started
    TCP Session test thread 58 is started
    TCP Session test thread 58 is starting to exchange data with the test server
    TCP Session test thread 55 is starting to exchange data with the test server
    TCP Session test thread 56 is started
    TCP Session test thread 56 is starting to exchange data with the test server
    TCP Session test thread 59 is started
    TCP Session test thread 59 is starting to exchange data with the test server
    Opening TCP session test thread 60
    Opening TCP session test thread 61
    TCP Session test thread 60 is started
    Opening TCP session test thread 62
    Opening TCP session test thread 63
    Opening TCP session test thread 64
    TCP Session test thread 60 is starting to exchange data with the test server
    Opening TCP session test thread 65
    Opening TCP session test thread 66
    Opening TCP session test thread 67
    Opening TCP session test thread 68
    Opening TCP session test thread 69
    70 TCP session test threads are now running
    Waiting for 10 seconds
    TCP Session test thread 61 is started
    TCP Session test thread 63 is started
    TCP Session test thread 61 is starting to exchange data with the test server
    TCP Session test thread 63 is starting to exchange data with the test server
    TCP Session test thread 62 is started
    TCP Session test thread 62 is starting to exchange data with the test server
    TCP Session test thread 65 is started
    TCP Session test thread 65 is starting to exchange data with the test server
    TCP Session test thread 64 is started
    TCP Session test thread 66 is started
    TCP Session test thread 66 is starting to exchange data with the test server
    TCP Session test thread 64 is starting to exchange data with the test server
    TCP Session test thread 69 is started
    TCP Session test thread 69 is starting to exchange data with the test server
    TCP Session test thread 67 is started
    TCP Session test thread 67 is starting to exchange data with the test server
    TCP Session test thread 68 is started
    TCP Session test thread 68 is starting to exchange data with the test server
    Opening TCP session test thread 70
    Opening TCP session test thread 71
    TCP Session test thread 70 is started
    Opening TCP session test thread 72
    TCP Session test thread 70 is starting to exchange data with the test server
    TCP Session test thread 71 is started
    Opening TCP session test thread 73
    TCP Session test thread 71 is starting to exchange data with the test server
    TCP Session test thread 72 is started
    Opening TCP session test thread 74
    Opening TCP session test thread 75
    TCP Session test thread 72 is starting to exchange data with the test server
    Opening TCP session test thread 76
    Opening TCP session test thread 77
    Opening TCP session test thread 78
    TCP Session test thread 75 is started
    Opening TCP session test thread 79
    80 TCP session test threads are now running
    TCP Session test thread 75 is starting to exchange data with the test server
    TCP Session test thread 76 is started
    Waiting for 10 seconds
    TCP Session test thread 76 is starting to exchange data with the test server
    TCP Session test thread 73 is started
    TCP Session test thread 79 is started
    TCP Session test thread 79 is starting to exchange data with the test server
    TCP Session test thread 73 is starting to exchange data with the test server
    TCP Session test thread 74 is started
    TCP Session test thread 77 is started
    TCP Session test thread 74 is starting to exchange data with the test server
    TCP Session test thread 77 is starting to exchange data with the test server
    TCP Session test thread 78 is started
    TCP Session test thread 78 is starting to exchange data with the test server
    Waiting for TCP session 0 to exit
    TCP Session test thread 44 is exiting
    TCP Session test thread 51 is exiting
    TCP Session test thread 2 is exiting
    TCP Session test thread 60 is exiting
    TCP Session test thread 78 is exiting
    TCP Session test thread 24 is exiting
    TCP Session test thread 10 is exiting
    TCP Session test thread 22 is exiting
    TCP Session test thread 17 is exiting
    TCP Session test thread 33 is exiting
    TCP Session test thread 20 is exiting
    TCP Session test thread 28 is exiting
    TCP Session test thread 38 is exiting
    TCP Session test thread 48 is exiting
    TCP Session test thread 15 is exiting
    TCP Session test thread 69 is exiting
    TCP Session test thread 7 is exiting
    TCP Session test thread 19 is exiting
    TCP Session test thread 67 is exiting
    TCP Session test thread 61 is exiting
    TCP Session test thread 40 is exiting
    TCP Session test thread 49 is exiting
    TCP Session test thread 0 is exiting
    TCP session 0 has exited
    Waiting for TCP session 1 to exit
    TCP Session test thread 79 is exiting
    TCP Session test thread 70 is exiting
    TCP Session test thread 52 is exiting
    TCP Session test thread 4 is exiting
    TCP Session test thread 72 is exiting
    TCP Session test thread 46 is exiting
    TCP Session test thread 50 is exiting
    TCP Session test thread 6 is exiting
    TCP Session test thread 37 is exiting
    TCP Session test thread 29 is exiting
    TCP Session test thread 32 is exiting
    TCP Session test thread 71 is exiting
    TCP Session test thread 23 is exiting
    TCP Session test thread 77 is exiting
    TCP Session test thread 39 is exiting
    TCP Session test thread 8 is exiting
    TCP Session test thread 76 is exiting
    TCP Session test thread 73 is exiting
    TCP Session test thread 47 is exiting
    TCP Session test thread 55 is exiting
    TCP Session test thread 27 is exiting
    TCP Session test thread 41 is exiting
    TCP Session test thread 59 is exiting
    TCP Session test thread 5 is exiting
    TCP Session test thread 42 is exiting
    TCP Session test thread 21 is exiting
    TCP Session test thread 3 is exiting
    TCP Session test thread 36 is exiting
    TCP Session test thread 31 is exiting
    TCP Session test thread 54 is exiting
    TCP Session test thread 74 is exiting
    TCP Session test thread 63 is exiting
    TCP Session test thread 43 is exiting
    TCP Session test thread 14 is exiting
    TCP Session test thread 13 is exiting
    TCP Session test thread 11 is exiting
    TCP Session test thread 16 is exiting
    TCP Session test thread 34 is exiting
    TCP Session test thread 62 is exiting
    TCP Session test thread 18 is exiting
    TCP Session test thread 45 is exiting
    
     
  33. spikes

    spikes Networkin' Nut Member

    1. I have a Brother HL-2040 Laser Printer that I am trying to connect to my Asus RT-N16 running tomato-K26USB-1.27.9046MIPSR2-beta14-Ext. I plugged the printer in via USB to the router but it doesn't show up in the attached USB device list. The USB print support option is enabled. Previously I had this same printer connected to an Asus 520gu running tomato-NDUSB-1.27.8746-Ext and it worked fine.

    2. Thanks. Will try it out later tonight and let you know if it worked for me.
     
  34. komugi

    komugi Addicted to LI Member

    2nd Part, other post too long:

    Code:
    TCP Session test thread 9 is exiting
    TCP Session test thread 57 is exiting
    TCP Session test thread 68 is exiting
    TCP Session test thread 53 is exiting
    TCP Session test thread 64 is exiting
    TCP Session test thread 26 is exiting
    TCP Session test thread 30 is exiting
    TCP Session test thread 1 is exiting
    TCP Session test thread 56 is exiting
    TCP session 1 has exited
    Waiting for TCP session 2 to exit
    TCP session 2 has exited
    Waiting for TCP session 3 to exit
    TCP session 3 has exited
    Waiting for TCP session 4 to exit
    TCP session 4 has exited
    Waiting for TCP session 5 to exit
    TCP session 5 has exited
    Waiting for TCP session 6 to exit
    TCP session 6 has exited
    Waiting for TCP session 7 to exit
    TCP session 7 has exited
    Waiting for TCP session 8 to exit
    TCP session 8 has exited
    Waiting for TCP session 9 to exit
    TCP session 9 has exited
    Waiting for TCP session 10 to exit
    TCP session 10 has exited
    Waiting for TCP session 11 to exit
    TCP session 11 has exited
    Waiting for TCP session 12 to exit
    TCP Session test thread 75 is exiting
    TCP Session test thread 12 is exiting
    TCP Session test thread 35 is exiting
    TCP session 12 has exited
    Waiting for TCP session 13 to exit
    TCP session 13 has exited
    Waiting for TCP session 14 to exit
    TCP session 14 has exited
    Waiting for TCP session 15 to exit
    TCP session 15 has exited
    Waiting for TCP session 16 to exit
    TCP session 16 has exited
    Waiting for TCP session 17 to exit
    TCP session 17 has exited
    Waiting for TCP session 18 to exit
    TCP session 18 has exited
    Waiting for TCP session 19 to exit
    TCP session 19 has exited
    Waiting for TCP session 20 to exit
    TCP session 20 has exited
    Waiting for TCP session 21 to exit
    TCP session 21 has exited
    Waiting for TCP session 22 to exit
    TCP session 22 has exited
    Waiting for TCP session 23 to exit
    TCP session 23 has exited
    Waiting for TCP session 24 to exit
    TCP session 24 has exited
    Waiting for TCP session 25 to exit
    TCP Session test thread 25 is exiting
    TCP session 25 has exited
    Waiting for TCP session 26 to exit
    TCP session 26 has exited
    Waiting for TCP session 27 to exit
    TCP session 27 has exited
    Waiting for TCP session 28 to exit
    TCP session 28 has exited
    Waiting for TCP session 29 to exit
    TCP session 29 has exited
    Waiting for TCP session 30 to exit
    TCP session 30 has exited
    Waiting for TCP session 31 to exit
    TCP session 31 has exited
    Waiting for TCP session 32 to exit
    TCP session 32 has exited
    Waiting for TCP session 33 to exit
    TCP session 33 has exited
    Waiting for TCP session 34 to exit
    TCP session 34 has exited
    Waiting for TCP session 35 to exit
    TCP session 35 has exited
    Waiting for TCP session 36 to exit
    TCP session 36 has exited
    Waiting for TCP session 37 to exit
    TCP session 37 has exited
    Waiting for TCP session 38 to exit
    TCP session 38 has exited
    Waiting for TCP session 39 to exit
    TCP session 39 has exited
    Waiting for TCP session 40 to exit
    TCP session 40 has exited
    Waiting for TCP session 41 to exit
    TCP session 41 has exited
    Waiting for TCP session 42 to exit
    TCP session 42 has exited
    Waiting for TCP session 43 to exit
    TCP session 43 has exited
    Waiting for TCP session 44 to exit
    TCP session 44 has exited
    Waiting for TCP session 45 to exit
    TCP session 45 has exited
    Waiting for TCP session 46 to exit
    TCP session 46 has exited
    Waiting for TCP session 47 to exit
    TCP session 47 has exited
    Waiting for TCP session 48 to exit
    TCP session 48 has exited
    Waiting for TCP session 49 to exit
    TCP session 49 has exited
    Waiting for TCP session 50 to exit
    TCP session 50 has exited
    Waiting for TCP session 51 to exit
    TCP session 51 has exited
    Waiting for TCP session 52 to exit
    TCP session 52 has exited
    Waiting for TCP session 53 to exit
    TCP session 53 has exited
    Waiting for TCP session 54 to exit
    TCP session 54 has exited
    Waiting for TCP session 55 to exit
    TCP session 55 has exited
    Waiting for TCP session 56 to exit
    TCP session 56 has exited
    Waiting for TCP session 57 to exit
    TCP session 57 has exited
    Waiting for TCP session 58 to exit
    TCP Session test thread 65 is exiting
    TCP Session test thread 58 is exiting
    TCP Session test thread 66 is exiting
    TCP session 58 has exited
    Waiting for TCP session 59 to exit
    TCP session 59 has exited
    Waiting for TCP session 60 to exit
    TCP session 60 has exited
    Waiting for TCP session 61 to exit
    TCP session 61 has exited
    Waiting for TCP session 62 to exit
    TCP session 62 has exited
    Waiting for TCP session 63 to exit
    TCP session 63 has exited
    Waiting for TCP session 64 to exit
    TCP session 64 has exited
    Waiting for TCP session 65 to exit
    TCP session 65 has exited
    Waiting for TCP session 66 to exit
    TCP session 66 has exited
    Waiting for TCP session 67 to exit
    TCP session 67 has exited
    Waiting for TCP session 68 to exit
    TCP session 68 has exited
    Waiting for TCP session 69 to exit
    TCP session 69 has exited
    Waiting for TCP session 70 to exit
    TCP session 70 has exited
    Waiting for TCP session 71 to exit
    TCP session 71 has exited
    Waiting for TCP session 72 to exit
    TCP session 72 has exited
    Waiting for TCP session 73 to exit
    TCP session 73 has exited
    Waiting for TCP session 74 to exit
    TCP session 74 has exited
    Waiting for TCP session 75 to exit
    TCP session 75 has exited
    Waiting for TCP session 76 to exit
    TCP session 76 has exited
    Waiting for TCP session 77 to exit
    TCP session 77 has exited
    Waiting for TCP session 78 to exit
    TCP session 78 has exited
    Waiting for TCP session 79 to exit
    TCP session 79 has exited
    The Internet Gateway Device sustains 80 concurrent TCP sessions
    
     
  35. Spyros

    Spyros LI Guru Member

    QoS didn't worked for me, i used the setup example from this page

    http://www.linksysinfo.org/forums/showpost.php?p=357556&postcount=135

    with no luck

    Limits didn't work at all, actually i was downloading a single torrent with 10Mbps (top line speed) while the generic limit was 8Mbps and the class limit 1%, also while i was downloading the torrent at full speed i couldn't access the internet at all from another computer. Port settings at QoS where correct because the traffic graphs showed the bandwidth assigned to crawl class, also my port setup is not difficult because Deluge client allows to set the outbound port range as well as the inbound. I also tried priotities by IP or MAC with no success.
     
  36. teddy_bear

    teddy_bear Network Guru Member

    For anyone reporting problems with UPnP and QoS with beta 14 - please state if the same setup worked for you in beta 11 or not. If you have not tried beta 11 - please try installing it and test the same setup.
     
  37. ollobollo

    ollobollo Networkin' Nut Member

    Perhaps related to the firmware installed, has anyone here had stability issues due to overheating on the Asus RT-N16? Some DD-WRT users have installed fans and extra heatsinks on the CPU and radio chips on theirs to keep it cool and prevent it from crashing or slowing down. Mine is on the way in the mail, so I can't testify on this personally.

    Thank you very, very much for your work on this.
     
  38. though

    though Network Guru Member

    read the thread, please. these issues are not present with teddy's release.
     
  39. ollobollo

    ollobollo Networkin' Nut Member

    My apologies. I searched the thread for "heat" and found some helpful posts that gave peace of mind. For anyone else wondering, this page and the following ones are good.

    Thank you for the quick reply.
     
  40. rhester72

    rhester72 Network Guru Member

    Hrm...OK, well, I've now reproduced some unhappiness.

    A "make clean" breaks sqlite during a firmware compile with no recovery possible except to repull from git. This started at least three commits ago. Ugh.

    Rodney
     
  41. bagu

    bagu Network Guru Member

    Upnp microsoft tests : it simply don't run upnp tests
    I don't use utorrent, but i have a pc with an emule version which have an upnp test and it fail.

    I can't revert to B11 for the moment.
     
  42. komugi

    komugi Addicted to LI Member

    teddy bear:

    The UPNP seems to be 'semi-working' in the the beta11 firmware.

    I say semi-working because, for whatever reason UPNP seems to be passing through except for ports 80 and 443, unless there is a specific setting I missed to allow passthrough for ports 80 and 443

    Tomato v1.27.9045 MIPSR2-beta11 K26 USB vpn3.6
    Code:
    BusyBox v1.16.1 (2010-04-26 14:21:42 EDT) built-in shell (ash)
    Enter 'help' for a list of built-in commands.
    
    root@RT-485B3942B91D:/tmp/home/root# sh wakeup-sabre.sh
    root@RT-485B3942B91D:/tmp/home/root# iptables -L -n; iptables -t nat -L -n
    Chain INPUT (policy DROP)
    target     prot opt source               destination
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp dpt:1195
    DROP       all  --  0.0.0.0/0            0.0.0.0/0           state INVALID
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0           state RELATED,ESTAB            LISHED
    shlimit    tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:22 state NE            W
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.1         tcp dpt:22
    
    Chain FORWARD (policy DROP)
    target     prot opt source               destination
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
    DROP       all  --  0.0.0.0/0            0.0.0.0/0           state INVALID
    TCPMSS     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp flags:0x06/0x02             TCPMSS clamp to PMTU
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0           state RELATED,ESTAB            LISHED
    wanin      all  --  0.0.0.0/0            0.0.0.0/0
    wanout     all  --  0.0.0.0/0            0.0.0.0/0
    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
    upnp       all  --  0.0.0.0/0            0.0.0.0/0
    
    Chain OUTPUT (policy ACCEPT)
    target     prot opt source               destination
    
    Chain shlimit (1 references)
    target     prot opt source               destination
               all  --  0.0.0.0/0            0.0.0.0/0           recent: SET name: s            hlimit side: source
    DROP       all  --  0.0.0.0/0            0.0.0.0/0           recent: UPDATE seco            nds: 60 hit_count: 3 name: shlimit side: source
    
    Chain upnp (1 references)
    target     prot opt source               destination
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:45654
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.120       udp dpt:45654
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:4570
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:8005
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:8087
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:4125
    
    Chain wanin (1 references)
    target     prot opt source               destination
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:7111
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.120       udp dpt:7111
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.120       tcp dpt:50050
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.120       udp dpt:50050
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:62332
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:62332
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:6126
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:6126
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:39000
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:39000
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:44121
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:44121
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:51669
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.124       udp dpt:51669
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpt:113
    ACCEPT     tcp  --  0.0.0.0/0            192.168.1.124       tcp dpts:54000:5401            9
    ACCEPT     udp  --  0.0.0.0/0            192.168.1.1         udp dpt:1195
    
    Chain wanout (1 references)
    target     prot opt source               destination
    Chain PREROUTING (policy ACCEPT)
    target     prot opt source               destination
    ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp dpt:1195
    DROP       all  --  0.0.0.0/0            192.168.1.0/24
    DNAT       icmp --  0.0.0.0/0            xxx.xxx.xxx      to:192.168.1.1
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx      tcp dpt:557 to:192.            168.1.1:22
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx      tcp dpt:7111 to:192            .168.1.120:7111
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx      udp dpt:7111 to:192            .168.1.120:7111
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx      tcp dpt:50000 to:19            2.168.1.120:50050
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx      udp dpt:50000 to:19            2.168.1.120:50050
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx      tcp dpt:62332 to:19            2.168.1.124:62332
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx      udp dpt:62332 to:19            2.168.1.124:62332
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx      tcp dpt:6126 to:192            .168.1.124:6126
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx      udp dpt:6126 to:192            .168.1.124:6126
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx      tcp dpt:39000 to:19            2.168.1.124:39000
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx      udp dpt:39000 to:19            2.168.1.124:39000
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx      tcp dpt:44121 to:19            2.168.1.124:44121
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx      udp dpt:44121 to:19            2.168.1.124:44121
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx      tcp dpt:51669 to:19            2.168.1.124:51669
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx      udp dpt:51669 to:19            2.168.1.124:51669
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx      tcp dpt:113 to:192.            168.1.124:113
    DNAT       tcp  --  0.0.0.0/0            xxx.xxx.xxx      tcp dpts:54000:5401            9 to:192.168.1.124
    DNAT       udp  --  0.0.0.0/0            xxx.xxx.xxx      udp dpt:1195 to:192            .168.1.1:1195
    upnp       all  --  0.0.0.0/0            xxx.xxx.xxx
    
    Chain POSTROUTING (policy ACCEPT)
    target     prot opt source               destination
    MASQUERADE  all  --  0.0.0.0/0            0.0.0.0/0
    SNAT       all  --  192.168.1.0/24       192.168.1.0/24      to:192.168.1.1
    
    Chain OUTPUT (policy ACCEPT)
    target     prot opt source               destination
    
    Chain upnp (1 references)
    target     prot opt source               destination
    DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:45654 to:19            2.168.1.120:45654
    DNAT       udp  --  0.0.0.0/0            0.0.0.0/0           udp dpt:45654 to:19            2.168.1.120:45654
    DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:4570 to:192            .168.1.120:4570
    DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:8005 to:192            .168.1.120:8005
    DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:8087 to:192            .168.1.120:8087
    DNAT       tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:4125 to:192            .168.1.120:4125
    
     
  43. mstombs

    mstombs Network Guru Member

    Testing my own build of 14 on TM with Status Led fix only

    Code:
    Linux WRT54G-tm 2.6.22.19 #5 Wed Jun 2 21:55:08 BST 2010 mips GNU/Linux
    Upnp + NAT-PMP enabled (show in my network places unticked

    miniupnpd starts fine
    Code:
    Jun  3 13:24:12 unknown daemon.notice miniupnpd[4133]: HTTP listening on port 46441[FONT=monospace]
    [/FONT]Jun  3 13:24:12 unknown daemon.notice miniupnpd[4133]: Listening for NAT-PMP traffic on port 5351
    root@WRT54G-tm:/tmp/home/root# ps
      PID USER       VSZ STAT COMMAND
    ...
     4133 root       732 S    miniupnpd -f /etc/upnp/config
    
    The ports are open - 1900 is also upnp?

    Code:
    root@WRT54G-tm:/tmp/home/root# netstat -an
    Active Internet connections (servers and established)
    Proto Recv-Q Send-Q Local Address           Foreign Address         State
    tcp        0      0 0.0.0.0:46441           0.0.0.0:*               LISTEN
    tcp        0      0 192.168.1.1:80          0.0.0.0:*               LISTEN
    tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN
    tcp        0      0 0.0.0.0:23              0.0.0.0:*               LISTEN
    tcp        0      0 192.168.1.1:23          192.168.1.101:35409     ESTABLISHED
    udp        0      0 0.0.0.0:53              0.0.0.0:*
    udp        0      0 0.0.0.0:67              0.0.0.0:*
    udp        0      0 192.168.1.1:5351        0.0.0.0:*
    udp        0      0 0.0.0.0:1900            0.0.0.0:*
    udp        0      0 192.168.1.1:42105       0.0.0.0:*
    raw        0      0 0.0.0.0:255             0.0.0.0:*               255
    Skype chooses to use NAT-PMP, Transmission UPNP

    Code:
    Forwarded Ports
      External Internal Internal Address Protocol Description 
    17619 17619 192.168.1.101 UDP NAT-PMP  46955
    17619 17619 192.168.1.101 TCP NAT-PMP  46955
    64637 64637 192.168.1.101 TCP Transmission  at 64637
    The IPTables looks fine

    Code:
    root@WRT54G-tm:/tmp/home/root# iptables -nvL
    ...
    Chain FORWARD (policy DROP 0 packets, 0 bytes)
     pkts bytes target     prot opt in     out     source               destination
        6   360 ACCEPT     all  --  br0    br0     0.0.0.0/0            0.0.0.0/0
       76  3892 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           state INVALID
     3197  188K TCPMSS     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp flags:0x06/0x02 TCPMSS clamp to PMTU
       61  4737 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED
      356 17867 wanin      all  --  vlan1  *       0.0.0.0/0            0.0.0.0/0
     3322  225K wanout     all  --  *      vlan1   0.0.0.0/0            0.0.0.0/0
     3322  225K ACCEPT     all  --  br0    *       0.0.0.0/0            0.0.0.0/0
      356 17867 upnp       all  --  vlan1  *       0.0.0.0/0            0.0.0.0/0
    
    Chain OUTPUT (policy ACCEPT 2096 packets, 607K bytes)
     pkts bytes target     prot opt in     out     source               destination
    
    Chain upnp (1 references)
     pkts bytes target     prot opt in     out     source               destination
        1    47 ACCEPT     udp  --  *      *       0.0.0.0/0            192.168.1.101       udp dpt:17619
        1    48 ACCEPT     tcp  --  *      *       0.0.0.0/0            192.168.1.101       tcp dpt:17619
      354 17772 ACCEPT     tcp  --  *      *       0.0.0.0/0            192.168.1.101       tcp dpt:64637
    
    root@WRT54G-tm:/tmp/home/root# iptables -nvL -t nat
    ...
    Chain upnp (1 references)
     pkts bytes target     prot opt in     out     source                destination
        1    47 DNAT       udp  --  *      *       0.0.0.0/0             0.0.0.0/0           udp dpt:17619 to:192.168.1.101:17619
        1    48 DNAT       tcp  --  *      *       0.0.0.0/0             0.0.0.0/0           tcp dpt:17619 to:192.168.1.101:17619
      303 15256 DNAT       tcp  --  *      *       0.0.0.0/0             0.0.0.0/0           tcp dpt:64637 to:192.168.1.101:64637
    Host: Ubuntu 10.04 64 bit

    If yours not working how different?

    [edit] UPNP cannot be used for low ports such as 80 / 443, the conf file forbids anything below 1024 (no legitimate use!)

    Code:
    root@WRT54G-tm:/tmp/home/root# cat /etc/upnp/config
    ext_ifname=vlan1
    listening_ip=192.168.1.1/255.255.255.0
    port=0
    enable_upnp=yes
    enable_natpmp=yes
    secure_mode=yes
    upnp_forward_chain=upnp
    upnp_nat_chain=upnp
    notify_interval=60
    system_uptime=yes
    
    clean_ruleset_interval=600
    clean_ruleset_threshold=20
    presentation_url=
    uuid=800f4602-54b0-4634-ac8f-96ebe5bc36fc
    
    allow 1024-65535 192.168.1.1/255.255.255.0 1024-65535
    
    deny 0-65535 0.0.0.0/0 0-65535
     
  44. komugi

    komugi Addicted to LI Member

    [edit] UPNP cannot be used for low ports such as 80 / 443, the conf file forbids anything below 1024 (no legitimate use!)

    Code:
    root@WRT54G-tm:/tmp/home/root# cat /etc/upnp/config
    ext_ifname=vlan1
    listening_ip=192.168.1.1/255.255.255.0
    port=0
    enable_upnp=yes
    enable_natpmp=yes
    secure_mode=yes
    upnp_forward_chain=upnp
    upnp_nat_chain=upnp
    notify_interval=60
    system_uptime=yes
    
    clean_ruleset_interval=600
    clean_ruleset_threshold=20
    presentation_url=
    uuid=800f4602-54b0-4634-ac8f-96ebe5bc36fc
    
    allow 1024-65535 192.168.1.1/255.255.255.0 1024-65535
    
    deny 0-65535 0.0.0.0/0 0-65535
    [/QUOTE]

    Hmm, that's odd, the old Tomato I used allowed it fine. I guess I will need to edit it to get it to work as I don't want a perm forwarding, but only when my WHS is running.
     
  45. mstombs

    mstombs Network Guru Member

    The miniupnpd low port limits have always been in teddy_bear builds, maybe Jon didn't copy when he also adopted miniupnpd? They are not gui configurable.
     
  46. komugi

    komugi Addicted to LI Member

    Aye, I am editing it through putty. Thanks :] I guess upnp works for me on beta11 and not beta14 .
     
  47. komugi

    komugi Addicted to LI Member

    Code:
    root@RT-485B3942B91D:/tmp/home/root# cat /etc/upnp/config
    ext_ifname=vlan2
    listening_ip=192.168.1.1/255.255.255.0
    port=0
    enable_upnp=yes
    enable_natpmp=yes
    secure_mode=no
    upnp_forward_chain=upnp
    upnp_nat_chain=upnp
    notify_interval=60
    system_uptime=yes
    
    clean_ruleset_interval=0
    presentation_url=
    uuid=2b9a5213-6d15-4898-9334-4e437fd37fc9
    
    allow 1024-65535 192.168.1.1/255.255.255.0 1024-65535
    allow 80 192.168.1.1/255.255.255.0 80
    allow 443 192.168.1.1/255.255.255.0 443
    
    deny 0-65535 0.0.0.0/0 0-65535
    
    I'm assuming this should work in passing through ports 80 and 443, right?
     
  48. teddy_bear

    teddy_bear Network Guru Member

    Hmm... Works for me on Asus and for mstombs on TM in beta14, but not for you... While still works for you in beta11... Now - how to find the difference?? The major change in beta 14 is the new wifi driver - but I suppose it should affect the same router models in exactly the same way?

    As for limiting upnp ports, there's a "hidden" nvram setting for this (not available via GUI). If you simply edit the config file, it will be overriden with the default values every time WAN is reconnected. To make your changes permanent, you can manually set the following nvram variables:
    upnp_min_port_int, upnp_max_port_int, upnp_min_port_ext, upnp_max_port_ext
    to define the range of allowed internal and external ports.

    Alternatively, you can create the complete miniupnpd config file named /etc/upnp/config.alt - it will be used instead of a standard one if exists. Of course, after creating this file, you need to take measures to make it survive reboots as well - i.e. "nvram setfile2nvram /etc/upnp/config.alt".

    Another option is to create a file with additional options only - "/etc/upnp/config.custom" - it will be added to the standard config. For this file, you also will need to use "setfile2nvram" command (or other methods to make it permanent).

    Works fine for me on my Ubuntu 8.04 box...
    What happens when you run "make clean"? How exactly does it brake sqlite?
    EDIT: Never mind, I see what brakes it. Will fix in git soon.
     
  49. rhester72

    rhester72 Network Guru Member

    Code:
    rhester@bunny:/etc$ cat lsb-release
    DISTRIB_ID=Ubuntu
    DISTRIB_RELEASE=10.04
    DISTRIB_CODENAME=lucid
    DISTRIB_DESCRIPTION="Ubuntu 10.04 LTS"
    
    If I issue "make clean" in tomato/release/src-rt, then issue "make r2e", it ends with:

    Code:
    make[5]: Entering directory `/home/rhester/tomato/release/src/router/zlib'
    make[5]: Nothing to be done for `all'.
    make[5]: `libz.a' is up to date.
    make[5]: Leaving directory `/home/rhester/tomato/release/src/router/zlib'
    make[5]: Entering directory `/home/rhester/tomato/release/src/router/sqlite'
    make[5]: *** No rule to make target `all'.  Stop.
    make[5]: Leaving directory `/home/rhester/tomato/release/src/router/sqlite'
    make[4]: *** [sqlite] Error 2
    make[4]: Leaving directory `/home/rhester/tomato/release/src/router'
    make[3]: *** [all] Error 2
    make[3]: Leaving directory `/home/rhester/tomato/release/src-rt'
    make[2]: *** [bin] Error 2
    make[2]: Leaving directory `/home/rhester/tomato/release/src-rt'
    make[1]: *** [e] Error 2
    make[1]: Leaving directory `/home/rhester/tomato/release/src-rt'
    make: *** [r2e] Error 2
    
    I can reproduce this at will, only way I've found to recover yet is to do a new git clone and start over.

    Rodney
     
  50. akyboy

    akyboy Network Guru Member

    Just an newbie q I am thinking about getting N16 and wondering Does this firmware come with MLPPP?

    Tnx in advance!
     
  51. komugi

    komugi Addicted to LI Member

    Thanks teddy bear, got it to work wonderfully after setting the nvram commands. :] I was wondering why just editing the config didn't work, and saw that you already posted on how to do it.
     
  52. joew333

    joew333 LI Guru Member

    New WIFI Driver better

    Hi Teddy! Thanks for taking in all the feedback which is many and varied. The new WIFI driver 5.10.147.0 looks a lot more stable so far. I don't see (in one day of Beta 14) on a RT-N12 and also a RT-N16 the disconnections seen with the earlier driver. I don't know what others are seeing, but for me this looks like a good deal more stable on the wireless side. Again, many thanks for what you do as it make a big difference in what we do!
     
  53. ladysman

    ladysman LI Guru Member

    I have confirmed for me my non-syncing appletv problem is NOT related to UPNP but with wireless only. If they are hardwired into my network, the sync and function fine. If I unplug the cable they connect to the wireless network fine, but refuse to sync. I have internet access on wireless as well, just no itunes connection.

    I'll be gone most of the weekend but i'll try my other RTN16 with an older firmware to see if it then works.

    I agree that wireless seems much better as our iphones don't disconnect anymore (as of yet).
     
  54. MiKE41

    MiKE41 Networkin' Nut Member

    Hello all,

    Yesterday I purchased an Asus RT-N16 for use with this firmware.

    I have run into a small issue though, iptables seems to segfault whenever I try to use it.

    Code:
    [root@unknown sbin]$ iptables -L
    Chain INPUT (policy DROP)
    target     prot opt source               destination
    Segmentation fault
    [root@unknown sbin]$ iptables -nvL
    Chain INPUT (policy DROP 394 packets, 38805 bytes)
     pkts bytes target     prot opt in     out     source               destination
    Segmentation fault
    [root@unknown sbin]$ iptables -t nat -A PREROUTING -p tcp -d 63.241.255.79 --dport 3724 -j REDIRECT --to-ports 60001
    Segmentation fault
    
    the firmware flashed was tomato-K26USB-1.27.9046MIPSR2-beta14-vpn3.6.trx

    Any ideas?

    Edit: Could this be related? https://dev.openwrt.org/changeset/7745
     
  55. teddy_bear

    teddy_bear Network Guru Member

    MiKE41,
    Have you installed/added any additional software, or manually added any iptables rules?
    Have you cleared the nvram ("thorough" erase option) after installing Tomato?
     
  56. spikes

    spikes Networkin' Nut Member

    myersw,

    I tried the generic command set you provided, replacing the IP address with the ones matching my model. My modem's IP is 192.168.1.1. It still doesn't work. I can't even ping the modem. Here is what I have:

    ip addr add 192.168.1.10/30 dev $(nvram get wan_ifname) brd +
    iptables -I POSTROUTING -t nat -o $(nvram get wan_ifname) -d 192.168.1.0/30 -j MASQUERADE

    I have this script under "WAN Up" and also tried it under "Init" and "Firewall". What am I doing differently?
     
  57. teddy_bear

    teddy_bear Network Guru Member

    Update - build 47, beta 15

    This is a bug fix release. So far the previous beta 14 received mixed feedback. Some claim that the new Broadcom wireless driver 5.10.147.0 works better (improved connectivity, solved WDS issues), while others experience some weird problems with UPnP and QoS.

    Let's give the new driver one more try. In this update I fixed a few obvious bugs spotted in previous build, and removed Broadcom NAT module that might be responsible for some of the weirdness...

    Changes from previous build, beta 14:
    • Fixed flashing power led on Linksys routers: WRT320N and WRT54G-TM (possibly some other models too, thanks to dbt78 for the fix).
    • Fixed kernel warning messages (introduced in previous build) in the system log when using VPN.
    • Removed Broadcom "fast NAT" module that came with the wireless driver update in the previous build.
    • Removed USB initialization code changes from Broadcom SDK 5.10.147.0.
    • Included sendmail (Busybox applet) into Extras builds.
    • Fixed proxy autodiscovery mime handler to not require authorization.
    • Software update: ntfs-3g (in Extras build) updated to release 2010.5.22 (unused stuff only, just to keep up with the upstream version).
    Links to the firmware binaries and the git repository with sources are in the 1st post.
     
  58. teddy_bear

    teddy_bear Network Guru Member

  59. MiKE41

    MiKE41 Networkin' Nut Member

    Going through your ideas, I found the problem went away after I unmounted my USB drive (which was holding additional software in /opt). I also found out that if I do 'unset LD_LIBRARY_PATH' iptables begins to function normally with my USB drive mounted. It would appear one of the modules (libdl.so.0) in my /opt/lib was interfering with iptables.

    Thanks teddy_bear :)

    Edit: fixed it with

    rm /opt/lib/libdl-0.9.28.so
    ln -s /lib/libdl.so.0 /opt/lib/libdl-0.9.28.so

    /opt/lib/libdl.so.0 was symlinked to /opt/lib/libdl-0.9.28.so
     
  60. teddy_bear

    teddy_bear Network Guru Member

    That's important. NEVER set LD_LIBRARY_PATH, and you will avoid many weird issues. All Optware apps are compiled with 'rpath' specified, so they don't need LD_LIBRARY_PATH.
     
  61. spikes

    spikes Networkin' Nut Member

    teddy_bear,

    Not sure if you saw my response about the usb print server but here it is again:

    I have a Brother HL-2040 Laser Printer that I am trying to connect to my Asus RT-N16 running tomato-K26USB-1.27.9046MIPSR2-beta14-Ext. I plugged the printer in via USB to the router but it doesn't show up in the attached USB device list. The USB print support option is enabled. In Windows, the printer drivers are already installed. I have the printer set on the standard TCP/IP port with IP address of my router, port 9100, and raw data set. Tried printing to it and nothing happens. Previously I had this same printer connected to an Asus 520gu running tomato-NDUSB-1.27.8746-Ext and it worked fine.
     
  62. MiKE41

    MiKE41 Networkin' Nut Member

    I didn't set that up myself, but with a little digging I have found that the bash compile at http://ipkg.nslu2-linux.org/feeds/optware/ddwrt/cross/stable/bash_3.2.49-1_mipsel.ipk contains a profile script which automatically inserts /opt/lib into LD_LIBRARY_PATH.

    Code:
    #
    # Bash initialization script
    #
    
    PS1="[\u@\h \W]$ "
    PATH=/opt/sbin:/opt/bin:/sbin:/bin:/usr/sbin:/usr/bin
    LD_LIBRARY_PATH=/opt/lib:${LD_LIBRARY_PATH}
    
    export PS1 PATH LD_LIBRARY_PATH
    
     
  63. Catalin

    Catalin Addicted to LI Member

    Hello TB! Thank you very much for this update. I've been able to update my router's firmware using a satellite connection from the middle of the Atlantic Ocean. :)

    Everything works fine so far. I left you a little present on your PayPal Account, hope to find it useful for your future projects.

    Many thanks again.
     
  64. cyan

    cyan Networkin' Nut Member

    just curious is there a way to enable 40mhz on RT-N16 with tomato ?
     
  65. TexasFlood

    TexasFlood Network Guru Member

    Basic -> Network -> Channel Width -> 40MHz
     
  66. komugi

    komugi Addicted to LI Member

    Thanks teddy, will test when I get home and post results.
     
  67. rhester72

    rhester72 Network Guru Member

    Do you have any details on how this is done?

    Rodney
     
  68. rhester72

    rhester72 Network Guru Member

    The last bites-people-a-lot issue with K26 I can see is the notion that the br0 MAC gets changed to the tap0 MAC when bridging - this is a long-known issue with TAP that there are several possible solutions for, but it seems it would be worth fixing in the default builds to avoid user confusion (the infamous 'why does Vista/7 keep saying I'm connected to a different network every time I reboot the router?' problem).

    Thoughts? I can suggest possible solutions that I've used in the past with varying levels of hackitude. =)

    Rodney
     
  69. deboyz1014

    deboyz1014 Addicted to LI Member

    Yesterday I tried to downgrade from beta 14 to beta 11 on my RTN12 and it flashed successfully, however it all went downhill from there. I was unable to login to the router and it didn't response to any ping, long story short, I was able to get into the recovery mode and u/l beta14 again, however this is where the story takes another twist. I'm using RTn12 as a wireless bridge and up until I reverting back to 11, it was solid, but after recovery mode and going back to 14, I was able to access the internet for an hr and then it show the same symptom as when after I update to beta 11.

    Going on a 3 days vacation so won’t have time to play around with it anymore until I get back. Anyone ran into this issue before? Also, why does wireless client or wireless client bridge does not allow an N selection?
     
  70. komugi

    komugi Addicted to LI Member

    teddy:

    I did a upgrade from beta 11 -> beta 15 without resetting the settings remotely, it does not accept UPNP just like beta 14. I reverted back to beta 11 and it is working again.
     
  71. gingernut

    gingernut LI Guru Member

    I successfully updated my Netgear WNR2000v2 from stock firmware to DD-Wrt, then I tried flashing to the latest tomato-K26-1.27.9047MIPSR2-beta14-Std, latest at the time, DDWrt accepted the image fine and rebooted but from there on I'm not able to get an IP via DHCP, wireless led is off and I'm unable to get to Tomato's web interface even if I assign a static IP.

    It responds to pings at 192.168.1.1 but won't accept an image over tftp.

    According to Netgear this unit will only go into tftp mode if the firmware image is corrupt.

    I'll be hooking up a serial cable tomorrow to see whats going on.
     
  72. supe

    supe Networkin' Nut Member

    Upnp woes :(

    I like the overall wireless performance and feature set of this firmware. ... Kudos to the developers!!

    however, I too have not been able to get WHS (HP media smart server remote access) upnp configuration to work with both beta 14 and 15 firmware on a WNR3500L.

    I also have a WL-500W with oleg's firmware that plays nice with WHS remote access but the wireless performance is not up to par with the WNR3500L with Tomato :(

    Any help is Much Appreciated...
     
  73. teddy_bear

    teddy_bear Network Guru Member

    rhester72,
    1. By adding "-Wl,-rpath,/opt/lib" to the LDFLAGS, if that's what you asked.
    2. The TAP issue only affects VPN builds, doesn't it? I think it was discussed in the VPN thread before, and SgtPepperKSU indicated that he's gonna do something about it in the future.

    komugi and supe,
    Well, for me UPNP and QoS work properly in the last 2 betas... We need to figure out what's different between my setup, and those of you who have these problems.
    Please PM me the output of "nvram export --set" command from your router (with your passwords masked out)...

    deboyz1014,
    I have no problems with my N12 in Wireless bridge mode - currently running beta15. Your issues seem unusual - maybe it's time for you to reset the nvram? About N-selection, see my response to though:
    http://www.linksysinfo.org/forums/showthread.php?p=362633#post362633

    spikes,
    I don't have HL-2040, but 2 other Brothers - 2140 and 5240 - work with my RT-N16. I believe 2040 should work to. See if there are any messages in the system log about your printer. Try normal trouobleshooting - make sure printer is connected and turned on ;), that USB port is working with other devices, try to disable/enable USB 2.0 and/or OHCI driver (you need to reboot when you disable the driver) etc...

    gingernut,
    WNR2000v2 support is untested and might be incomplete - any information you can provide would be very useful! Could you also PM me the CFE from this unit? Thanks!
     
  74. Silviu

    Silviu Addicted to LI Member

    @teddy_bear thank u for a great mod i did wait for a while for Tomato on my new WRT320N (before i used it on WRT54GL and loved it)
    I tryed it BUT had to come back again to linksys firmware :( . I have 100 mbit line here downloding with ~11 MB/s ( the reason i purchased wrt320N is that my old one could not handle this speed ) . Problem is with Tomato build 15 and with dd-wrt i have same problem, my download is limited to ~7 7.5, i have no ideea what could cause this . And another thing, when i dl at this speed Tomato gui/ dd-wrt gui becomes verry sluggys can`t access it anymore, linksys gui is OK .
     
  75. Guzel

    Guzel Network Guru Member

    Hi teddy_bear
    The gigabit are not working whit WAN to LAN in beta15, I get 88/68 mbits now, whit beta14 I gat 266/164 mbits in wnr3500l
    VPN is working now
     
  76. gingernut

    gingernut LI Guru Member

    WNR2000V2 serial output:

    Code:
    Decompressing..........done
    Decompressing..........done
    
    CFE for WNR2000v2 version: v1.0.18
    Build Date: Wed Sep  9 14:33:22 CST 2009
    Init Arena
    Init Devs.
    Boot partition size = 262144(0x40000)
    Found a 4MB ST compatible serial flash
    et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.28
    CPU type 0x19749: 300MHz
    Tot mem: 32768 KBytes
    
    Device eth0:  hwaddr C0-3F-0E-0B-79-DA, ipaddr 192.168.1.1, mask 255.255.255.0
            gateway not set, nameserver not set
    Checksum mismatch:
    Image chksum: 0x25BA899D
    Calc  chksum: 0x02C0010E
    Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
    Loading: .. 5100 bytes read
    Entry at 0x80001000
    Closing network.
    Starting program at 0x80001000
    Linux version 2.6.22.19 (root@tomato) (gcc version 4.2.4) #4 Mon May 31 23:05:10 EDT 2010
    CPU revision is: 00019749
    Found a 4MB ST compatible serial flash
    Determined physical RAM map:
     memory: 02000000 @ 00000000 (usable)
    Built 1 zonelists.  Total pages: 8128
    Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
    Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
    Primary data cache 32kB, 4-way, linesize 32 bytes.
    Synthesized TLB refill handler (20 instructions).
    Synthesized TLB load handler fastpath (32 instructions).
    Synthesized TLB store handler fastpath (32 instructions).
    Synthesized TLB modify handler fastpath (31 instructions).
    PID hash table entries: 128 (order: 7, 512 bytes)
    CPU: BCM47162 rev 0 pkg 2 at 300 MHz
    Using 150.000 MHz high precision timer.
    Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
    Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
    Memory: 29632k/32768k available (2076k kernel code, 3136k reserved, 433k data, 108k init, 0k highmem)
    SLUB: Genslabs=6, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
    Mount-cache hash table entries: 512
    NET: Registered protocol family 16
    PCI: no core
    PCI: Fixing up bus 0
    Time: MIPS clocksource has been installed.
    NET: Registered protocol family 2
    IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
    TCP established hash table entries: 1024 (order: 1, 8192 bytes)
    TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
    TCP: Hash tables configured (established 1024 bind 1024)
    TCP reno registered
    squashfs: version 3.0 (2006/03/15) Phillip Lougher
    io scheduler noop registered (default)
    HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
    N_HDLC line discipline registered.
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
    PPP generic driver version 2.4.2
    NET: Registered protocol family 24
    PPPoL2TP kernel driver, V0.17
    PPTP driver version 0.8.4
    pflash: found no supported devices
    Creating 6 MTD partitions on "sflash":
    0x00000000-0x00040000 : "pmon"
    0x00040000-0x003e0000 : "linux"
    0x00119400-0x003b0000 : "rootfs"
    0x003b0000-0x003e0000 : "jffs2"
    0x003f0000-0x00400000 : "nvram"
    0x003e0000-0x003f0000 : "board_data"
    u32 classifier
        OLD policer on
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (512 buckets, 4096 max)
    ip_tables: (C) 2000-2006 Netfilter Core Team
    BCM fast NAT: INIT
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
    All bugs added by David S. Miller <davem@redhat.com>
    VFS: Mounted root (squashfs filesystem) readonly.
    Freeing unused kernel memory: 108k freed
    Warning: unable to open an initial console.
    Restarting system.
    Please stand by while rebooting the system...
    Decompressing..........done
    Decompressing..........done
    
    
    CFE for WNR2000v2 version: v1.0.18
    Build Date: Wed Sep  9 14:33:22 CST 2009
    Init Arena
    Init Devs.
    Boot partition size = 262144(0x40000)
    Found a 4MB ST compatible serial flash
    et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.28
    CPU type 0x19749: 300MHz
    Tot mem: 32768 KBytes
    
    Device eth0:  hwaddr C0-3F-0E-0B-79-DA, ipaddr 192.168.1.1, mask 255.255.255.0
            gateway not set, nameserver not set
    Startup canceled
    CFE> 
    

    It's stuck in a reboot cycle and doesn't stop.

    With ctrl+C I can get to the CFE prompt but I don't know what I need to do from there to recover it.
     
  77. teddy_bear

    teddy_bear Network Guru Member

    Thanks!
    I believe you should be able to start tftp from the CFE prompt to recover it. Try typing "help" for the list of commands available.
     
  78. dbt78

    dbt78 Networkin' Nut Member

    I just flash the WRT320N with this build .. For this router, everything looks good.
    the upnp works well dynamically. led are ok. I'll play with this weekend.
    Good job TB. !:):)
     
  79. bagu

    bagu Network Guru Member

    I try b15 upnp : no more success.
    Revert back to b11 work fine.

    I don't understand...Iptables seem to be the same.

    EDIT : there are exactly the same result with iptables -L -n; iptables -t nat -L -n
    I will stay on B11 for the moment.
     
  80. gingernut

    gingernut LI Guru Member

    Code:
    CFE> help
    Invalid command: "help"
    
    *** command status = -1
    CFE>
    Thats all I get.
     
  81. maurer

    maurer LI Guru Member

    Setup a local TFTP server on your PC and then execute the following commands inside CFE

    CFE> ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0
    CFE> et up
    CFE> flash -noheader 192.168.1.2:/oem-firmware.trx flash1.trx
    A simpler method is to have the CFE go into a voluntary boot_wait TFTP reception in this manner:

    CFE> ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0
    CFE> et up
    CFE> flash -noheader : flash1.trx
    The CFE will enter TFTP receptive mode after that command.

    copied from openwrt wiki - google more there
     
  82. gingernut

    gingernut LI Guru Member


    Lets test:

    Code:
    CFE for WNR2000v2 version: v1.0.18
    Build Date: Wed Sep  9 14:33:22 CST 2009
    Init Arena
    Init Devs.
    Boot partition size = 262144(0x40000)
    Found a 4MB ST compatible serial flash
    et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.28
    CPU type 0x19749: 300MHz
    Tot mem: 32768 KBytes
    
    Device eth0:  hwaddr C0-3F-0E-0B-79-DA, ipaddr 192.168.1.1, mask 255.255.255.0
            gateway not set, nameserver not set
    Startup canceled
    CFE> ^C
    CFE> ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0
    Device eth0:  hwaddr C0-3F-0E-0B-79-DA, ipaddr 192.168.1.1, mask 255.255.255.0
            gateway not set, nameserver not set
    *** command status = 0
    
    *** command status = -1
    CFE> et up
    Invalid command: "et"
    
    CFE> flash -noheader : flash1.trx
    Reading :: Done. 3448890 bytes read
    Programming...done. 3448890 bytes written
    
    Write len/chksum offset @ 0x0034FFF8...done.
    Decompressing..........done
    Decompressing..........done
    
    CFE for WNR2000v2 version: v1.0.18
    Build Date: Wed Sep  9 14:33:22 CST 2009
    Init Arena
    Init Devs.
    Boot partition size = 262144(0x40000)
    Found a 4MB ST compatible serial flash
    et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.28
    CPU type 0x19749: 300MHz
    Tot mem: 32768 KBytes
    
    Device eth0:  hwaddr C0-3F-0E-0B-79-DA, ipaddr 192.168.1.1, mask 255.255.255.0
            gateway not set, nameserver not set
    CPU ProcId is: 0x00019749, options: 0x000021cd
    Primary instruction cache 32kb, linesize 32 bytes (4 ways)
    Primary data cache 32kb, linesize 32 bytes (4 ways)
    Linux version 2.4.20 (zacker@svn) (gcc version 3.2.3 with Broadcom modifications) #201 Mon Nov 2 11:30:33 CST 2009
    Found a 4MB ST compatible serial flash
    Determined physical RAM map:
     memory: 02000000 @ 00000000 (usable)
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
    CPU: BCMb83a rev 0 at 300 MHz
    Calibrating delay loop... 149.91 BogoMIPS
    Memory: 30480k/32768k available (1440k kernel code, 2288k reserved, 112k data, 60k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    Checking for 'wait' instruction...  unavailable.
    POSIX conformance testing by UNIFIX
    PCI: no core
    PCI: Fixing up bus 0
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
    Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
    ttyS00 at 0xb8000300 (irq = 8) is a 16550A
    PPP generic driver version 2.4.2
    pflash: found no supported devices
    sflash: squashfs filesystem found at block 771
    Creating 10 MTD partitions on "sflash":
    0x00000000-0x00040000 : "boot"
    0x00040000-0x00390000 : "linux"
    0x000c0e9c-0x00390000 : "rootfs"
    0x00390000-0x003a0000 : "ML1"
    0x003a0000-0x003b0000 : "ML2"
    0x003b0000-0x003c0000 : "T_Meter1"
    0x003c0000-0x003d0000 : "T_Meter2"
    0x003d0000-0x003e0000 : "POT"
    0x003e0000-0x003f0000 : "board_data"
    0x003f0000-0x00400000 : "nvram"
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    Linux IP multicast router 0.06 plus PIM-SM
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    NET4: Ethernet Bridge 008 for NET4.0
    802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
    All bugs added by David S. Miller <davem@redhat.com>
    VFS: Mounted root (squashfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 60k freed
    Restoring defaults...Reading board data...
    WSC UUID: 0x1bafe34d8800925b32bbe55c7fcfe701
    convert_wlan_params_for_bssid: configure BSSID 2
    convert_wlan_params_for_bssid: configure BSSID 3
    convert_wlan_params_for_bssid: configure BSSID 4
    Algorithmics/MIPS FPU Emulator v1.5
    done
    Reading board data...
    WSC UUID: 0x1bafe34d8800925b32bbe55c7fcfe701
    convert_wlan_params_for_bssid: configure BSSID 2
    convert_wlan_params_for_bssid: configure BSSID 3
    convert_wlan_params_for_bssid: configure BSSID 4
    Commit new QoS switch config...
    Using /lib/modules/2.4.20/kernel/drivers/net/emf/emf.o
    Using /lib/modules/2.4.20/kernel/drivers/net/igs/igs.o
    Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
    Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o
    Hit enter to continue...WARNING: console log level set to 1
    killall: upnp: no process killed
    killall: wps_monitor: no process killed
    killall: wps_ap: no process killed
    killall: wps_enr: no process killed
    Reading board data...
    WSC UUID: 0x1bafe34d8800925b32bbe55c7fcfe701
    Using /lib/modules/2.4.20/kernel/net/ipv4/acos_nat/acos_nat.o
    info, udhcp server (v0.9.8) started
    error, unable to parse 'option wins '
    error, unable to parse 'option domain '
    the file size is 3710374461
    Need to upgrade the string table file!
    POT integrity check OK.
    IOCTL_AG_REGION_SET: English
    Start DHCP client daemon
    info, udhcp client (v0.9.8) started
    eth0: No such process
    Hit enter to continue...the file size is 36863
    tablesize = [36863] chksum = [1552671270] version = [1.0.0.34_0.5.0.0]
    
    Writing 36879 bytes to /dev/mtd/3.
    writing langTblHeader(16 bytes)
    .done.
    version [1.0.0.34_0.5.0.0]
    file_size is 36863
    Info: No FWPT default policies.
    Using /lib/modules/2.4.20/kernel/net/ipv4/multissidcontrol/MultiSsidControl.o
    
    Thanks a million Maurer, I'm back to Netgear firmware :smile:.

    Is there anything you would like me to try TB while I've got the serial cable attached?
     
  83. komugi

    komugi Addicted to LI Member

    teddy: too long for PM, 5000 char limit, will send link
     
  84. rhester72

    rhester72 Network Guru Member

    It was and it works, thanks. :)

    Fair enough.

    Rodney
     
  85. bake73

    bake73 LI Guru Member

    UPnP is still not working in the latest beta :frown:
    I've upgraded to a Asus RT-N16 now(from a WRT320N) :biggrin: beta 11 works perfectly though.
    I'll do some more testing tomorrow and post some more info.
     
  86. bagu

    bagu Network Guru Member

    If you give me tests to do, i can do them sunday.
     
  87. mstombs

    mstombs Network Guru Member

    Thanks for the beta15 update teddy_bear

    Now running the USB extras version on my WRT54G-TM (yes I know I haven't got a usb port, and need to be careful not to try to use it!) , so I can play with BusyBox sendmail

    I can send mail via my ISP smtp server - authorisation based on source IP, here's a template wanup script, essential changes in header

    Code:
    # WANUP Script to send an email whenever the router is (re)connected.
    #===============================
    FROM=<tomato@tomato.com
    TO=<user@gmail.com>
    NAME=tomato
    SMTP=<smtp.yourISP.net>
    SUB="Router reconnect"
    MSG="/var/msg.txt"
    #===============================
    # give time chance to update
    sleep 30
    # write the email headers
    cat >$MSG<<EOF
    From: $FROM
    To: $TO
    Subject: $SUB
    Date: $(date)
    
    Hello $NAME
    
    The router has reconnected on: $(date)
    
    I just thought I'd notify you.
    
    Here's the new ISP IP details
    
    IP=$(nvram get wan_ipaddr), NM=$(nvram get wan_netmask) GW=$(nvram get wan_gateway)
    
    Best regards,
       Your beloved router.
    
    EOF
    # send the email
    sendmail -S $SMTP -f $FROM <$MSG
    
    logger "WANUP msg sent"
    # cleanup
    rm $MSG
    
    But I still can't get gmail to wok with secure mode, despite the help suggesting it should now work. The advantage to this is that it is ISP independent

    Code:
    BusyBox v1.16.1 (2010-06-03 16:13:56 EDT) multi-call binary.
    
    Usage: sendmail [OPTIONS] [RECIPIENT_EMAIL]...
    
    Read email from stdin and send it
    
    Standard options:
            -t              Read additional recipients from message body
            -f sender       Sender (required)
            -o options      Various options. -oi implied, others are ignored
            -i              -oi synonym. implied and ignored
    
    Busybox specific options:
            -w seconds      Network timeout
            -H 'PROG ARGS'  Run connection helper
                            Examples:
                            -H 'exec openssl s_client -quiet -tls1 -starttls smtp
                                    -connect smtp.gmail.com:25' <email.txt
                                    [4<username_and_passwd.txt | -au<username> -ap<password>]
                            -H 'exec openssl s_client -quiet -tls1
                                    -connect smtp.gmail.com:465' <email.txt
                                    [4<username_and_passwd.txt | -au<username> -ap<password>]
            -S server[:port] Server
            -au<username>   Username for AUTH LOGIN
            -ap<password>   Password for AUTH LOGIN
            -am<method>     Authentication method. Ignored. LOGIN is implied
    
    Other options are silently ignored; -oi -t is implied
    Latest error message is

    Code:
    openssl:Error: 's_client' is an invalid command.
    
    Standard commands
    enc            req            rsa            x509
    
    Cipher commands (see the `enc' command for more details)
    bf-cbc         bf-ecb
    
    sendmail: NOOP failed
     
  88. TexasFlood

    TexasFlood Network Guru Member

    So... NOOP failed just indicates the script isn't talking to the smtp server eh? I'm not yet sure what the issue might be yet but found a thread that might be applicable. Trying to muddle through it.

    Thanks for pointing out to me that I could get sendmail on my RT-N16 on this build, didn't realize that. Means I don't have to worry about debugging that telnet smtp script, so good news, :smile:.
     
  89. iloveramen

    iloveramen Networkin' Nut Member

    Just got my Asus RT-N16 and flashed Beta15. Everything works great so far, wireless seems to be working excellent, and UPNP works just fine.
     
  90. palmfans

    palmfans Addicted to LI Member

    Teddy,

    I am new to Tomato and used Beta14 on my Asus RT-N16. I have a problem that my company PC only have PPTP vpn connection. It is possible to setup PPTP vpn server on Tomato.
     
  91. volodymyr

    volodymyr Guest

    Hello Teddy,

    First I would like to thank for amazingly good firmware for Asus RT-N16. At the given time it is the best by stability/features and it is very good just out of the box.

    I have a small question regarding ipkg on tomato. I was trying to mount a ext2 formatted usb 2.0 flash drive and it was not properly mounted by tomato. The same drive worked in Asus firmware and it worked in Ubuntu. When I mount drive via web interface I get message box:

    "Failed to mount. Verify the device is plugged in, and try again."

    If I logon via ssh and look at log I see the following:

    Code:
    Jun  5 08:45:16 unknown user.info kernel: usb 1-2: new high speed USB device using ehci_hcd and address 6
    Jun  5 08:45:16 unknown user.info kernel: usb 1-2: configuration #1 chosen from 1 choice
    Jun  5 08:45:16 unknown user.info kernel: scsi3 : SCSI emulation for USB Mass Storage devices
    Jun  5 08:45:17 unknown user.debug hotplug[1826]: Attached USB device 1-2:1.0 [INTERFACE=8/6/80 PRODUCT=1aa6/201/1000]
    Jun  5 08:45:18 unknown user.notice kernel: scsi 3:0:0:0: Direct-Access     USB2.0   Flash Disk       1.00 PQ: 0 ANSI: 0 CCS
    Jun  5 08:45:19 unknown user.notice kernel: sd 3:0:0:0: [sda] 7989248 512-byte hardware sectors (4090 MB)
    Jun  5 08:45:19 unknown user.notice kernel: sd 3:0:0:0: [sda] Write Protect is off
    Jun  5 08:45:19 unknown user.debug kernel: sd 3:0:0:0: [sda] Mode Sense: 03 00 00 00
    Jun  5 08:45:19 unknown user.err kernel: sd 3:0:0:0: [sda] Assuming drive cache: write through
    Jun  5 08:45:19 unknown user.notice kernel: sd 3:0:0:0: [sda] 7989248 512-byte hardware sectors (4090 MB)
    Jun  5 08:45:19 unknown user.notice kernel: sd 3:0:0:0: [sda] Write Protect is off
    Jun  5 08:45:19 unknown user.debug kernel: sd 3:0:0:0: [sda] Mode Sense: 03 00 00 00
    Jun  5 08:45:19 unknown user.err kernel: sd 3:0:0:0: [sda] Assuming drive cache: write through
    Jun  5 08:45:19 unknown user.info kernel:  sda: unknown partition table
    Jun  5 08:45:19 unknown user.notice kernel: sd 3:0:0:0: [sda] Attached SCSI removable disk
    
    It seems like it does not detect ext2/ext3 partitions. I formatted drive as Fat32 and it was able to detect and mount it! But I need ext for ipkg and optware ...

    Is there any workaround? I use tomato-K26USB-1.27.9047MIPSR2-beta15-Ext

    Thanks!
     
  92. Gold

    Gold Addicted to LI Member

    UPnP not working beta 14 and 15

    UPnP is still not working in the latest beta 14 and 15. Beta 11 is working perfectly. Testing som more.
     
  93. hapahopi

    hapahopi Addicted to LI Member

    i have better wireless connectivity with the latest firmware, beta15, on laptops as well as mobile phones. Thanks TB!

    Asus Wl-500gP v2
    Tomato-K26USB-1.27.9047MIPSR2-beta15-Ext
     
  94. cyan

    cyan Networkin' Nut Member

    just recheck .. settings is 40Mhz, but in status channel width is 20Mhz
    wireless client = intel 5300. router = RT-N16. Do I miss anything ?
     
  95. dbt78

    dbt78 Networkin' Nut Member


    it's really a strange problem ! :eek:

    I did a conectivity test on this link: http://www.microsoft.com/windows/using/tools/igd/default.mspx

    port mapping seems to work ...

    Do not hurry ... I noticed that with beta15 , the discovery and report of mapped ports in the interface of tomato is sometimes quite long.

    Code:
    Internet Connectivity Evaluation Tool
    http://www.microsoft.com/windows/using/tools/igd/default.mspx
    
    //-----------------------------------
    Test 5 - UPnP Support Test Supported  
    //-----------------------------------
    
    Result: 
    The operating system is Windows Vista
    The firewall is disabled
    UPnP is enabled by the firewall
    UPnP services are running
    UPnP Discovery is enabled
    Detecting Internet Gateway Devices on the network
    1 IGD(s) found
    IGD Device Information:
    Manufacturer Name : UPnP
    Model Name : UPnP router
    Model Number : 1
    0 existing port mappings were found: 
    This test will add 20 port mappings to the IGD
    Using the local computer's IP address (192.168.2.101) for testing
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61068
    Internal Port : 61126
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme0
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61175
    Internal Port : 61249
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme1
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61330
    Internal Port : 61344
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme2
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61375
    Internal Port : 61394
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme3
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61529
    Internal Port : 61529
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme4
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61615
    Internal Port : 61670
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme5
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61693
    Internal Port : 61739
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme6
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61749
    Internal Port : 61867
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme7
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 61929
    Internal Port : 61967
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme8
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62002
    Internal Port : 62054
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme9
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62064
    Internal Port : 62088
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme10
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62137
    Internal Port : 62224
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme11
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62314
    Internal Port : 62308
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme12
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62426
    Internal Port : 62452
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme13
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62531
    Internal Port : 62487
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme14
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62580
    Internal Port : 62664
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme15
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62712
    Internal Port : 62679
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme16
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62763
    Internal Port : 62863
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme17
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62913
    Internal Port : 62945
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme18
    
    
    ***********************************************************
    Adding a new port mapping to the IGD:
    External Port : 62940
    Internal Port : 63039
    Protocol : UDP
    Internal Client : 192.168.2.101
    Enabled : TRUE
    Description : removeme19
    
    20 new port mappings have been added successfully
    There are 20 port mappings on the IGD
    Waiting for 60 seconds
    There are 20 Port Mappings on the IGD
    Deleting all the test port mappings from the IGD
    
    
    
     
  96. mstombs

    mstombs Network Guru Member

    teddy_bear just added it to the Extras build.

    BB sendmail is fairly new, and every recent version has had an update changing syntax, implementing more features of full sendmail.

    I've tried my own and Victek builds before, I think gmail is close now - just rebuilding from git with, I hope, the missing, was commented out, "s_client" built into openssl ... but not so easy, seems you need a full install of openssl with libssl etc ...
     
  97. Catalin

    Catalin Addicted to LI Member

    cyan, read the entire thread, or search it. Most Intel wireless cards are not able to work on 40 MHz when using only 2.4 GHz band.'

    ------------------------------
    Beta14 version worked fine. After updating to Beta15, PPPoE connection drops very often, and I cannot get remote access to the router... The only solution was to revert back to Beta11.
     
  98. TexasFlood

    TexasFlood Network Guru Member

    I can think of a few things to check.

    First check the settings on your Intel wireless card. It is my understanding that older Intel cards didn't even support wide 2.4GHz mode and newer ones don't by default but can be set to do so. When I googled this found an article which listed the following procedure to set this under Windows XP. This will, of course, vary if you have a different OS. In Windows XP, to open the Intel PROSet/Wireless Wi-Fi Connection Utility, click "Advanced > Adapter Settings", set "802.11n Channel Width (2.4 GHz)" to "Auto".

    Also on the router, under Advanced -> Wireless, I was advised to enable WMM and set "CTS Protection Mode" to "Auto". I must confess I don't remember all the details of why, :wink: but search this thread or ask here if you're curious.
     
  99. rhdcheme

    rhdcheme Addicted to LI Member



    Yes, I can confirm this as well. No matter what settings I try on the router (RT-N16) or the adapters, I cannot get 40 MHz wide channel (stuck at 20 MHz even when set to 40 MHz). Thus, speeds are diminished.
     
  100. Spyros

    Spyros LI Guru Member

    If you are using a Intel WiFi Link 5000-series cards (5100 and 5300) or the 4965AGN card under Windows 7 64-bit there are some known problems with broadcom, you need to update to the latest wireless driver from the Intel site.
     

Share This Page