Tomato over DD-WRT (WRT54GL 1.1)...How?

Discussion in 'Tomato Firmware' started by Cliff Couser, Jun 5, 2007.

  1. Cliff Couser

    Cliff Couser Guest

    OK. Please be patient with me.

    Have a WRT54GL 1.1 with DD-WRT SP2 installed.

    I want to give Tomato a try as I'm still having some problems with my wireless print server getting dropped.

    TO flash to Tomato. I should simply revert back to the Linksys firmware...and then flash to Tomato.

    Problem is, Linksys site does not list firmware for 1.1 - Should I just use the firmware for 1.0 then flash to Tomato?

    Thanks for any clarification!
     
  2. bogderpirat

    bogderpirat Network Guru Member

    just do a hard-reset using the reset-button in the back of your wrt54gl device while still under dd-wrt, connect to it and flash over the tomato image, then afterwards, again do a hard-reset. then you're done.
     
  3. Deimdos

    Deimdos Network Guru Member

    or read the readme file that comes with tomato firmware ;)
     
  4. GeeTek

    GeeTek Guest

    Whoever told you this was wrong. If you already have dd-wrt, simply do a firmware upgrade from dd-wrt menu using the Tomato firmware file.
     
  5. der_Kief

    der_Kief Super Moderator Staff Member Member

    or read the FAQ :biggrin:

    der_Kief
     
  6. fastpakr

    fastpakr Network Guru Member

    Yep, absolutely no need to flash to Linksys firmware. Just reset before, flash to Tomato, then reset again.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice