1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato RAF Releases

Discussion in 'Tomato Firmware' started by Victek, Dec 28, 2012.

  1. azaccaria

    azaccaria Reformed Router Member

    Hello, Vic.

    I've just acquired a Linksys EA6900 and was looking for firmware to install on it, considering that the original one from Belkin is crippled in many ways. The idea is to replace an existing WRT54GL already running Tomato for over 3 years now.

    Is Tomato RAF compatible with it? Any chances of bricking the router if I do?
     
  2. Victek

    Victek Network Guru Member

    Not compatible till now, 100% will brick.
     
    azaccaria likes this.
  3. azaccaria

    azaccaria Reformed Router Member

    Thanks, Vic. I learned the router was released just a couple of months ago, so I will keep looking around for porting onto it. ;-)
     
  4. Victek

    Victek Network Guru Member

    It looks very similar to RT-AC68U ... so ... when ARM will run in Tomato all these models can run too...
     
    azaccaria likes this.
  5. azaccaria

    azaccaria Reformed Router Member

    Vic, would you be interested in porting it if you had your hands on one of those (Linksys EA6900 or any one that will help make it available to that line)?

    If you do, here is the thing: donating the router I currently have would cost more for me on S&H than the price of the device itself.

    I was thinking of either:

    1- Purchasing another one online and having it delivered straight to an address you provide to me.
    2- Donating the cash (via PayPal) and you purchasing it at the store (online or not) most convenient to you.

    Please consider any customs restrictions that would apply and advise accordingly.

    Let me know...
     
    mito likes this.
  6. Victek

    Victek Network Guru Member

    Let's do it in the following way, as you may be know I'm working now porting ARM to tomato, when RT-AC56/AC68U will run then we talk again about, now is to earlier for your offer. After porting these models the process to include EA6900 can be relatively faster than now.

    I know you may receive some private messages from other people, so, do what you think is best.

    I always prefer a donation instead of physical unit delivery due to customs problems, also you can contribute with small amount and other guys looking for same target can contribute too.

    Now it's not the moment to buy EA6900, as usual .... let's wait after Christmas ... ;) for price drop.
     
    Last edited: Nov 26, 2013
    mito and azaccaria like this.
  7. azaccaria

    azaccaria Reformed Router Member

    OK, Vic. I'll wait for your feedback.

    Once again, thanks for taking the time to get back to me. :)
     
  8. Victek

    Victek Network Guru Member

    dnsmasq updated to 2.68rc4, I'll burn next release on busy network traffic some days more till release, it works smooth and few surprises till now. ;)
     
    nurofen, philess and Elfew like this.
  9. Lorenceo

    Lorenceo Networkin' Nut Member

    I was just trying QoS with IPv6, and it seems that if I let the router boot with it enabled it will never establish a working IPv6 connection. All connections show as unreachable. This is the same IPv6 behaviour I get when I let the router boot normally.

    However, if I enable QoS after IPv6 is working (from booting the router without WAN cable connected, and connecting WAN cable after it has fully booted) it does seem to work.

    Initially after enabling QoS clients and the router will report all v6 hosts as unreachable, but after a while it will start working again.
    This behaviour happens when disabling QoS as well.

    I'm not sure whether QoS is limiting v6 connections or not, but can confirm that it is functioning when enabled with v4 traffic.
     
  10. Elfew

    Elfew Addicted to LI Member

    Victek wrote that IPv6 with QoS enabled will be fixed in next build... just wait. I think it will be soon.
     
  11. Victek

    Victek Network Guru Member

    Lorenceo case it's the 'exception' for average connections we handle in this forum, his provider sets dhcpv6-pd and dnsmasq-tomato have some problem with it. He explained the 'weird' procedure he follows to establish ipv6 routing... it looks a race condition, already talked with other tomato devel without null feedback till now...
    What's interesting his QoS with ipv6, I think @RonV can test or confirm if he have the same experience ...

    Thanks!
     
  12. Victek

    Victek Network Guru Member

    Last edited: Nov 29, 2013
    mito likes this.
  13. MatteoV

    MatteoV Serious Server Member

    Is 1.2x already available for E4200 or is it in the works :)?
     
  14. Victek

    Victek Network Guru Member

    burning in the oven with full update to nginx 1.4.4, siproxd testing, dnsmasq (full update) to 2.68rc4, and some new features more .... V1.2v runs fine ... so .. no rush. ;)

    Tomato RAF for ARM platform already running in RT-AC56/AC-68U... solving the issues now ...
     
    JugsteR, jerrm, Goggy and 3 others like this.
  15. Elfew

    Elfew Addicted to LI Member

    I just saw a changelog for build x, no rush, we have build v ;)
     
  16. MatteoV

    MatteoV Serious Server Member

    I agree. I just was thinking about activating nginx to do some cool things so that's why I wrote :p
    Of course, no matter, and no rush really, I will just wait patiently ;)
     
  17. Victek

    Victek Network Guru Member

    I was thinking to move 1.2v as stable version and throw all Y2012 versions.. it's the first time I leave my router with one version running longer than a week ;)
     
  18. Elfew

    Elfew Addicted to LI Member

    I think there is no point to leave older versions with unfixed bugs... maybe it would be better to keep only last 2-3 builds for each router and clean up it :) Christmas are coming :)
     
  19. Elfew

    Elfew Addicted to LI Member

    Last edited: Dec 1, 2013
  20. lockheed

    lockheed Reformed Router Member

    I have been using Tomato Firmware v1.28.1816 on my Linksys WRT54G ver.2 since several years and had no idea the development of other versions was still going on.

    I have two questions:

    1. What firmware version (ideally with USB support) would be best for this model? I looked at Victek website, but there does not seem to be any mention of this router.

    2. I would like to have USB 2.0 NAS support, which is the only thing I miss in my current router. If I was to get a new router, as cheap as possible, and compatible with a Tomato, what model would you advise me? I am in Europe.
     
  21. Elfew

    Elfew Addicted to LI Member

    Rt-16n asus - cheap, powerful, 32mb of flash memory, 128mb of ram...

    I have two of them
     
  22. lockheed

    lockheed Reformed Router Member

    Ok, thanks. I guess I will stick to WRT54G for the moment.

    How about my first question?
     
  23. Victek

    Victek Network Guru Member

  24. Elfew

    Elfew Addicted to LI Member

    Wrt54 has slow cpu for this...you need more powerful device
     
  25. lockheed

    lockheed Reformed Router Member

    That's ok. I will drop the USB idea.

    Victek, thanks for the links. But there are many files there. Which one is the newest suitable for WRT54G v2?
     
  26. Victek

    Victek Network Guru Member

  27. lockheed

    lockheed Reformed Router Member

    Great, thanks. So I guess anything newer will not run on that router?

    And will I be able to restore configuration from old Tomato on it, or do I have to set it up again?
     
  28. alexlau

    alexlau LI Guru Member

    It's suggested to set it up totally from scratch, so that no potential problem will arise.
     
  29. Victek

    Victek Network Guru Member

    All guys having problem with QoS and IPv6 please post, I'have one version to test.
    Users with dhcp6-pd ... test done for few hours and problem solved, I need more testing sites, please post.

    A lost family weekend .. but Tomato issues with ipv6 solved...
     
  30. lockheed

    lockheed Reformed Router Member

    Victek, I was curious if your firmware has an option to run a small pixelserver that could be used with hostsblock to display 1x1 gif image, replacing the annoying "Page could not be found" message displayed by web browsers in place of blocked ads.

    Here's a binary of the program I am talking about:
    http://www.dd-wrt.com/phpBB2/viewtopic.php?t=52112
     
  31. Victek

    Victek Network Guru Member

    Yes, you can find some good manual done by @RonV using Tomato RAF (NGINX as reverse proxy) with better performance than pixelserv .. but with better router E4200,RT-N16 and upwards you can find his post in the forum, a complete and great job.
     
  32. lockheed

    lockheed Reformed Router Member

    I found his post, but apparently this is not possible on my router. There is no web server option.
     
  33. Victek

    Victek Network Guru Member

    Ok, you can't use usb, you can't build better solutions .. you know the answer.
     
  34. lockheed

    lockheed Reformed Router Member

  35. Victek

    Victek Network Guru Member

    In the same path you post.
     
  36. lockheed

    lockheed Reformed Router Member

    But there is no sourcecode for this version.
    Can I use this newer Tomato_RAF_1.28.9013_source_code.tar?
    Will it still have all the features of Tomato-RAF-1.28.8525_VPN.7z ?
     
  37. Victek

    Victek Network Guru Member

  38. Lorenceo

    Lorenceo Networkin' Nut Member

    After a bit of testing with QoS and IPv6, it seems that QoS is not functioning properly with IPv6 connections.
    QoS is limiting IPv4 connections properly, but it is not limiting IPv6 connections properly.
    Under QoS, View Details it shows that v6 connections are being classified correctly, but it doesn't seem to be limiting them properly.
    While downloading a file over port 119 on IPv6 under QoS, View Graphs there was lot of default class traffic, which shouldn't be happening. Port 119 should be classed as a lower priority with how I have QoS set up.

    It also seems that having both v4 and v6 traffic downloading at the same time reduces throughput. While downloading over v4 only I was downloading as fast as my line could handle. When v4 and v6 downloads were running at the same time throughput was much more bursty, and was peaking at about 2/3rds of my max line speed.
     
  39. Victek

    Victek Network Guru Member

    Thanks Lorenceo, at least ipv6 is not blocking QoS as before and you can finally connect dhcpv6-pd with your provider ...
    Let's see more test when the version will be released .. ;)
     
  40. ZforZelda

    ZforZelda Serious Server Member

    what does the "speedtest" version mean? is it optimized for wifi speed or over-all speed? or a specialized version for speed tests/benchmarks only?

    I've been using e3000 for three years, using Tomato-RAF, I can't remember the version, about late 2011, definitely before 2013, recently my ISP boost WAN speed to 100Mbps only at midnight, and when I download at about 10~12MB/s using lftp, I can't even browse the web normally, router setting page is not very responsible, CPU load boost to 3.xx, if I limit download speed to about 8MB/s in lftp, everything seems fine, I'm so disappointed that former linksys flagship can't even handle 100Mbps properly.

    Today I checked Victek's homepage and updated to 9013 1.0, will test again tonight, without much hope.

    I saw there is a statement "BW 193Mbps Download, 135Mbps Upload with up to 3.000 concurrent connections." in the 1.3 announcement, so what about 1.0? and on what kind of hardware did that speed test run on? can I expect e3000 with RAF2013 1.3 to handle 100 Mbps or should I buy a new router now?

    thanks anyone who has the patience to read this post
     
  41. Victek

    Victek Network Guru Member

    @ZforZelda thanks for your detailed explanation, I think the issue is related with 'router hardware' and 'flagship' for this model is over with high speed connection. You should buy a more powerful router.... but ... do you like to see the router GUI when you download at 10-12MB?... or do you want to surf Internet and download? Then your router is doing a good job. ;)

    About versions... Speedtest version facilitates better bandwidth with less features runnig in the router, other versions are more CPU hungry then the bandwidth is restricted, but for 100Mbps line you can use any Tomato RAF version.
     
    Last edited: Dec 3, 2013
  42. riley0

    riley0 Addicted to LI Member

    v1.2u working very well on Linksys E2000 and Netgear WNR3500L v2. Thanks a lot!

    Any chance of a new build for Asus RT-N12 D1?
     
  43. ZforZelda

    ZforZelda Serious Server Member

    thanks for your reply, an EA6700 is on the way now:rolleyes:

    I just want to surf Internet while downloading, and it's not doing a good job @100Mbps, I don't need so many features since I have a Debian headless machine for that now, can I expect better performance from factory firmware?
     
  44. Victek

    Victek Network Guru Member

    Surely yes, it's a good revamping for your connection.

    RT-N12 D1 ..we need details, I don't have unit to test and extract data... but you can use dd-wrt and post the cfe.bin here.
     
  45. riley0

    riley0 Addicted to LI Member

    @Victek : Please find attached the cfe.bin from Asus RT-N12 D1. I successfully flashed the router with dd-wrt for submodel B1. Please let me know if there is anything else I can provide.

    Thanks!
     

    Attached Files:

  46. Victek

    Victek Network Guru Member

    Would you copy nvram contents from dd-wrt? cfe.bin looks same maping as RT-N12B1 ... did you tried any tomato version before?
     
  47. riley0

    riley0 Addicted to LI Member

    Here is the nvram contents. Also attached dmesg output.

    I did not try any tomato versions, but after some searching I've read accounts of people installing shibby's build with success. Earlier I read of people flashing B1 versions of dd-wrt which is why I started there.

    http://www.newegg.com/Product/Product.aspx?Item=N82E16833320168
    "[...] then up to the latest shibby tomato supported by this router (tomato-K26-1.28.RT-N5x-MIPSR2-115-Max), it's running great."

    Thanks
     

    Attached Files:

  48. Victek

    Victek Network Guru Member

    OK .. you can try also tomato raf version for instance.. for E3000, it will work in your router without problem. Subject solved.
     
  49. c0wb0y

    c0wb0y Reformed Router Member

    Im pretty much new to all this tomato stuff.
    But ive managed to install/flash Tomato RAF Firmware v1.28.9013 MIPSR2-RAF-V1.2v K26 USB on my RT-N16.
    Very nice firmware. very nice GUI. lot of options i dont know and never heared about. ;)
    I feel like im gonne donate a few bucks for this wonderfull firmware.

    My goal was to get the PPTP client working. After that i wanted to try open vpn as well.
    But i stuck @ pptp.

    i really dont know what to do.
    ive tried every option in the gui with diffrent free pptp vendors but it doesnt work for me.

    hope you guys can help me with this.


    here is my log:

    edit:

    edit: forget to tell you, im using the RT-N16 as a (static) IP client iny my lan. (Double NAT)
    ISP Router 192.168.254.254 (routing PPPoE + Voip)
    RT-N16: 192.168.1.1 + dhcp (all lan and wlan devices are connected to the RT-N16)
    Route Modem IP: 192.168.254.254
     
    Last edited: Dec 5, 2013
  50. Victek

    Victek Network Guru Member

    1st. open dmz in your main router to RT-N16 IP.
    2nd. show us your ppptp settings .. but I think after you open dmz everything should work....
     
  51. c0wb0y

    c0wb0y Reformed Router Member

    @Victek, first of all thanks for the fast response.
    ive tested another free vpn vendor and it seems to be working now.

    here are my pptp test settings:
    (pptpvpn.org)
    Screenshot_3.png

    I guess my only problem was that i had to check "Start with WAN" + reboot.
    Otherwise pptp doesnt seems to connect + reconnect as it should.
    i would prefer pptp off after reboot. Is this possbile ?


    Log( succesfull after reboot, pptp stop/start):
    Edit: log "Start with WAN off"
     
    Last edited: Dec 5, 2013
  52. bcmalloy

    bcmalloy Reformed Router Member

    Running Tomato RAF Version 1.28.9013 series (Beta) on RT-N66U , This is the best firmware I've tried yet on this router, smooth as butter, stable no weird issues nice work victek! I'll probably stick with this build until my router fails.
     
  53. riley0

    riley0 Addicted to LI Member

    I would like to try tomato raf. But did you really mean E3000 is similar to RT-N12 D1 that the firmware will work? (Wouldn't the different nvram size at least be an issue?)
     
  54. lefty

    lefty Networkin' Nut Member

    Yes the different nvram size would be an issue, most likely - you'd need to use 32k nvram style build for that unit unless it has some other size nvram. The links in the downloads section of Victek's tomato RAF site are not all correct, otherwise i would point you to what i would try with it, but as it is - i cannot.
     
  55. Victek

    Victek Network Guru Member

    Yes, you're right ... I'll build a version for this router .. thanks for the point.
    Lefty, could you help me correct the links you found not correct? thanks.
     
    riley0 likes this.
  56. Victek

    Victek Network Guru Member

    Glad it works now, the option 'start with wan' configures the device on boot ... I didn't check the issue you mention using the option once the function is used 'on the fly' since I start my unit always with the service activated ... have to check, thanks for the observation.
     
  57. Victek

    Victek Network Guru Member

    I suggest you to update to next build that I'll release in coming days... it has been running for some days in my router and it's very stable ... and with dnsmasq and IPv6 bugs solved. Thanks for your feedback!
     
    Goggy and gffmac like this.
  58. lefty

    lefty Networkin' Nut Member

    In the downloads section, Cisco Linksys Beta Versions, the WRT320N (which is what i would have tried on the RT-N12 because its a 32k nvram build that can fit into an 8MB flash space) and the WRT610N v2 both point to an E3000 build, which either of those units can't use an E3000 build. Also, either builds for the WRT320n or WRT610N v2 could have been easily fashioned to work on the RT-N12, problem being that neither of them have their proper builds in the links provided - both point to an E3000 build, which cannot be fashioned to work on a 32k nvram style unit.
     
  59. Victek

    Victek Network Guru Member

    Thanks.. I'll link to the right file now... or build a new version in coincidence with next beta build. ;)
     
  60. Elfew

    Elfew Addicted to LI Member

    Hehe ;) so I am looking for it :)
     
  61. -=XERG=-

    -=XERG=- Serious Server Member

    Super pleased with r1.2 on my E4200.:) Any idea when 1.3 will roll out, sir? Most interested in the improved bandwidth you mention as my 150mbs/65mbs FIOS caps around 135mbs/65mbs with the CPU running at 533mhz. Saw the speedtest version and am considering but I am now starting to use the VPN functions in current fw.

    Also, any plans to push onto the Netgear Nighthawk R7000? I see there are a couple DD-WRT builds just starting already. 128 Flash, 256 RAM, Broadcom BCM4709 1Ghz dual-core, USB 3.0

    EDIT: NVM on the R7000 just found this after looking forever!
    http://www.linksysinfo.org/index.ph...shibby-support-for-new-netgear-routers.69288/

    Read you were working on ARM port so got excited! ;)
     
    Last edited: Dec 7, 2013
  62. Victek

    Victek Network Guru Member

    Updates for next beta version till today (assumed V1.2x).

    - dnsmasq updates (2.68rc5),
    - nginx updated to 1.4.4
    - Login name customized window.
    - IPv6. Some sites (facebook) not accesible. Code again TCP MSS clamp for IPV6 with ppp connection, Thanks to Vladislav Grishenko.
    - QoS broken with IPv6 solved. Need to test statistics.
    - DHCPv6-PD random connection problem solved.
    - IPv6 ICMP firewall added.
    - IPv6 SSH pass added.
    - kernel patches for carrier-on bug, 14 service patchs more applied.
    - DNSCrypt service: upstream to 1.3.3 version
    - libsodium: upstream to 0.45 version
    - dropbear: upstream to 2013.62 version. Includes ecdsa key. (+5KB firmware size)
    - openssl: generates ecdsa host key. (+3KB firmware size).
    - Typos in menu label and manual correction. Thanks to Elfew.
     
    Last edited: Dec 8, 2013
    gffmac, Goggy and Elfew like this.
  63. DaniT

    DaniT Reformed Router Member

    Thanks a lot for your work Victek! I'm currently running Tomato RAF 1.2v on an Asus RT-N66 on Movistar FTTH and the internet is working great, but I have not managed to get the configuration right for the IPTV to work. Have you got it working or is it a feature pending for 1.3? Any tips?

    Thanks!
     
  64. Victek

    Victek Network Guru Member

    AFAIK Movistar changed config for IPTV March-May this year, they used static route previously, now I think they use dhcp client via vlan2 (similar to VoIP configuration in my page) you can try. I have no chance to test it, sorry.
     
  65. The Master

    The Master LI Guru Member

    Hi Victek... the new FW comes as a Christmas Present?! I hope so. Would be a nice Christmas...;)

    And THANK YOU SO MUTCH for this great FW.
     
  66. Elfew

    Elfew Addicted to LI Member

    I used IPTV with this firmware, I wanted to save space for another box in my room... it was working fine but I dont use this anymore - configuration after every flash and I am lazy :D plus it is a litle bit tricky so I need help of my friend :)
     
  67. RonV

    RonV Network Guru Member

    Thanks Victek for all the work you have been putting into IPv6. I don't know what Facebook is doing but even on native IPv6 from AT&T without using a router I have long periods of where I cannot connect at all. When I ran the HE Tunnel I rarely had any IPv6 issues. I have brought this up before but no response to the issue with Facebook.
     
  68. c0wb0y

    c0wb0y Reformed Router Member

    hey victek. ive successfully flashed Tomato RAF Firmware v1.28.9013 MIPSR2-RAF-Pro-V1.2w K26 USB on my RT-N16.
    Now im trying to set up openvpn.
    Allready got it running (keys cert aso are fine). Buti dont get the TUN interface in my Routing table for some reason.
    So basicly i cant use my OpenVPN connection... :(
    Edit: got it working. Prroblem was that i didnt added the custom configuration part.
     
    Last edited: Dec 9, 2013
  69. bunk3m

    bunk3m Networkin' Nut Member

    Bug found.

    Not sure if you have a place to post and organize bugs, but since I didn't find anything in my quick look, I decided to post here. My apologies if this is the right place.

    RT-N16
    Firmware: tomato-K26USB-1.28.9013MIPSR2-32K-RAF-Pro-V1.2w.trx

    1) sip phone. I tried to turn off sipphone. I have no SIP phones. Press "Stop Now". Click "Siproxd on Startup" to "off". Press "Save"

    Result: "The field "siproxd_if_inbound" is invalid. Please report this problem."

    Expected Result: sip off by default

    Workarounds: None so far.
     
  70. Elfew

    Elfew Addicted to LI Member

    Which builds? There is new build X
     
  71. bunk3m

    bunk3m Networkin' Nut Member

    I can't find an X build on either the ftp site or via the firmware download link.

    Where would I find this "X"?
     
  72. Elfew

    Elfew Addicted to LI Member

    Sorry, I thought that it is already released... I cannot check it (I dont use VoIP)
     
  73. Victek

    Victek Network Guru Member

    It's a great present with gratitude for all you, not? Yes it will be my present for all of you as I'm doing every year ;)

    Yes, this bug was reported some posts before, thanks. BUT we want to test siproxd .. this is the reason why you can disable it but it turns again when you reboot the device... :)

    Correct, the TCPMSS clamp to TCPMTU solves it, tested by guys in New Zealand and Australia. (I have not asked my kids if they have same problem but I'm using also he.net tunnel).

    Still in jail .. not released cause I add more gadgets.... no rush...
     
  74. zorkmta

    zorkmta LI Guru Member


    Very nice to wait New release, using 1.2v on RT_N16, RT _ N66U both stable more than 10 days without issue

    Enviado desde mi GT-I9505 mediante Tapatalk
     
  75. nurofen

    nurofen Serious Server Member

    I can not find where to download the firmware :)
     
  76. Victek

    Victek Network Guru Member

    It's a changelog, not a release .. yet .. just to keep informed about progress to next version. ;)
     
  77. nurofen

    nurofen Serious Server Member

    Thank you! I'll wait for the new version :)
     
  78. gffmac

    gffmac Serious Server Member

    My router is overheating in anticipation. :p
     
  79. Victek

    Victek Network Guru Member

    koitsu, Elfew and eviltone like this.
  80. leshan

    leshan Network Guru Member

    Hi Victek,
    I compiled a Ext(r2m) version of v1.2w with your source code from github for my F7D7301. But something wrong with the basic-network page(please check attachment), the save button of this page doesn't work either. The other pages are fine. What did I miss? Would you help me out? Thanks.

    Also, I have to modify the makefile of libnfnetlink by changing '/home/vicente' to '/home/myusername' to make the compile go though.
     

    Attached Files:

    • 1.png
      1.png
      File size:
      96.9 KB
      Views:
      34
    • 2.png
      2.png
      File size:
      71.3 KB
      Views:
      34
  81. Victek

    Victek Network Guru Member

    @leshan , I never used r2m switch .... better use r2nc, r2nf, but looking at .. I think you should specify in make also VLAN=y or n, this is the reason.

    About the path change.. make distclean to align the dependencies before make..

    This git is a 'beta' repo I use to make test.. after testers confirm everything it's OK then I pass to tomato git.. use with caution. ;)

    Thanks!
     
    Last edited: Dec 10, 2013
  82. leshan

    leshan Network Guru Member

    Thank you for your quick reply.

    I tried r2nc r2ncl, same result. I didn't try r2nf, I thought it's too big for 8M flash router.
    I did make distclean each time before make.
    So, I'd better download source code from tomato git instead of from github?
    Thanks again.
     
  83. Victek

    Victek Network Guru Member

    You can do it from repo, in any case I updated a clean libnfnetlink few minutes ago. I hope you can build without problems now.
     
  84. eahm

    eahm LI Guru Member

    BTW Victek, thanks for the new website/downloads page.
     
  85. leshan

    leshan Network Guru Member

    Trying to compile with tomato git, always got to chose n/y to continue:
    Compile with Samba 3 (TCONFIG_SAMBA3) [N/y] (NEW)

    compile stopped with error message:
    fs/cifs/export.c:43:28: error: linux/exportfs.h: No such file or directory
    make[7]: *** [fs/cifs/export.o] Error 1
    make[6]: *** [fs/cifs] Error 2
    make[5]: *** [fs] Error 2
     
  86. Victek

    Victek Network Guru Member

    say Y .. it's a pointer I use to see configurations ... the other message ... check if file exists ...
    Would you explain your compilation environment?...in my case it works since many years..
     
    Last edited: Dec 10, 2013
  87. leshan

    leshan Network Guru Member

    No, not MIPSR1. I build only mipsr2(src-rt) too.
     
  88. Victek

    Victek Network Guru Member

    read it again .. changed while you was answering...
     
  89. leshan

    leshan Network Guru Member

    I followed your instruction in readme.txt on github. The only different is I used Ubuntu x64 12.04.3. I had no problem to compile your github source code.
     
  90. Victek

    Victek Network Guru Member

    ..nothing change.. repo.cz is more stable. Remember then to set environment to the right path.. or check the file you mention exists...
     
  91. leshan

    leshan Network Guru Member

    Victek,
    the file exportfs.h doesn't exist in repo.cz source code. I copied over from github source. But, got another error:
    In file included from fs/cifs/export.c:43:
    include/linux/exportfs.h:124: error: redefinition of 'struct export_operations'
    make[7]: *** [fs/cifs/export.o] Error 1
    make[6]: *** [fs/cifs] Error 2
    make[5]: *** [fs] Error 2
     
  92. MrJman

    MrJman Reformed Router Member

    Victek, a friend with an E3000 is considering flashing your FW, so I read through the instructions on your site. I was surprised to see your recommendation to first flash DD-WRT FW. Is this required? Will the Tomato RAF FW fail if flashed directly over the factory FW?
    I am currently running Tomato RAF Firmware v1.28.9013 MIPSR2-RAF-V1.2 K26 USB VLAN-NGINX on my E3000 - flashed over an older DD-WRT version. Can I flash directly back to the factory FW?
    Thanks much for your time, John.
     
  93. leshan

    leshan Network Guru Member

    VLAN=y fixed the problem. Before I just used VLAN=n or remove VLAN=y, both caused basic-network page problem.
     
  94. leshan

    leshan Network Guru Member

    I flashed my E3000 from stock -> tomato without problem, as well as tomato -> stock.
     
  95. MrJman

    MrJman Reformed Router Member

    Thanks much, LI Guru. Enjoy, John.
     
  96. Victek

    Victek Network Guru Member

    I posted the 'safe' procedure for beginners ;)

    @leshan , finally!, ;)
     
  97. leshan

    leshan Network Guru Member

    Thank you Victek,I still having problem to compile your repo.cz source code.

    the file exportfs.h doesn't exist in repo.cz source code. I copied over from github source. But, got another error:
    In file included from fs/cifs/export.c:43:
    include/linux/exportfs.h:124: error: redefinition of 'struct export_operations'
    make[7]: *** [fs/cifs/export.o] Error 1
    make[6]: *** [fs/cifs] Error 2
    make[5]: *** [fs] Error 2
     
  98. Victek

    Victek Network Guru Member

    No idea .. for what model and which switch do you use?
     
  99. leshan

    leshan Network Guru Member

    I tried r2m, r2nc with or without VLAN=y
     
  100. MrJman

    MrJman Reformed Router Member

    OK, thanks much, Victek. Enjoy, John.
     

Share This Page