Tomato RAF with included BitTorrent Client - beta testing

Hi all!

I get this error on port forward basic

Any news about the ipv6 fix?

Thanks

Seems that you have wrote some wrong in iptables.
Sometimes when you make a new ruleset that can be displayed before you reboot router.

no automatic migration possible. just copy the files downloaded by torrent on your external drive in the download folder of transmission and start adding torrent 1 by 1 - it will take alot of time for big torrents >1GB until all files hashes are checked.
just leave this hashing running over night

yes i do. But i haven`t this router. I will think about buy it and then will try to add support.

Flashed to tomato-K26USB-1.28.RT-N5x-MIPSR2-097-AIO-64K.trx since I had odd behaviour with the first non-64k load, and everything seems smooth and very stable. Thanks Shibby for a quality build. Ported my settings over and everything is working great as well.

Ditto, I am not having any issues with what I need out of v097-AIO-64K. I try to test other parts of it when I know how and can. Only other problems have been Guest WiFi, which has it's own thread and is being discuses in the Multi-BSSID thread. Dunno if Teaman has had a chance to take a look.

RT-N66U, definitely best router I've ever had. Slightly better than the E4200v1.

Now, is it safe to leave Transmit Power to 100 like the E4200v1 had?

I'll keep doing more test but it seems the original firmware performs better (download/upload speed).

[quote="eahm, post: 186333, member: 42178"

I'll keep doing more test but it seems the original firmware performs better (download/upload speed).[/quote]

If you mean the wireless performance, try tweaking some of Advanced settings:
Frame Burst -> Enable
802.11n Preamble -> Green Field
ASPD Mode -> Disable

After changing these I got the performance on par with Asus fm (if not slightly better).

What do you use for Transmit Power? I have 0 right now and testing.

May be old news to you, but applies to clients as well as servers, in case you're not using it:

AvoidDiskWrites 0|1
If non-zero, try to write to disk less frequently than we would otherwise. This is useful when running on flash memory or other media that support only a limited number of writes. (Default: 0)

Rodney

I am using default 42 for both bands.
Tried to play with it a while ago on 5 ghz band but changing it didn't seem to have any meaningful difference to the signal strength, so I don't bother...

I'm not entirely sure what is causing issues for you guys with regard to the virtual (guest) wireless. Running 097-AIO-64K on my RT-N66U, uptime now over 10 days, and I can still reliably connect to my wl0.1 and wl1.1 guest SSID's. I'm running both 2.4 and 5 Ghz bands, and can connect to all 4 (main 2.4 and 5, guest 2.4 and 5). Could it be a setting somewhere that I don't have set that is causing issues?

Is anyone else but me NOT having issues with their Guest Wi-fi?

http://www.linksysinfo.org/index.php?threads/tomato-multissid.36697/page-5#post-186290

Hi Shibby, I discovered your site with openwrt builds for my tp-link 1043 in the past year. (Tp-link at my office and Asus at home) I really want to throw away the TP-link and get the RT-66 : D

Wow TOR is the most awesomest thing to have on the router. You read my mind. It works very good.
I had some issues though - the Time doesn't update even after 15 minutes after connecting. Tor requires time to work. I had to manually set the time using "date 072616202012".

A 60k nvram version for tomato-K26USB-1.28.RT-MIPSR2-097-AIO would be nice please. I use fstab, adblock script, openvpn echo 'key file, vpnroute.sh file - so it would be nice to have space in nvram.

Don't mind helping the TOR community if there was a gateway option in addition to client (not sure how it works...i use advtor in windows). Btw is it possible to configure an app like IE to use tor via 192.168.1.1:9050, without being in IP allowed list?

Keep up the super work. Much appreciated.

RT? For RT-N66u you have to use RT-N builds. 64K build for RT-N66u was published few days ago
http://tomato.groov.pl/download/K26RT-N/build5x-097-EN/Asus RT-N66u 64k/

@rhester72 - well you suggest i should add AvoidDiskWrites 1 to TOR config by default?

Shibby , sorry for a dumb questions, but now I want to install Your Tomato on my WRT320N and there is misty moments on me in that process

1. My provider gets static IPv4 address for me .I need not use IPv6 ,VPN and other things anymore.

It seems that two firmwares are good for me -

tomato-K26-1.28.RT-MIPSR2-097-Max.trx or
tomato-K26-1.28.RT-MIPSR2-097-Mini.trx

Which one may I choice to install ?

2 .Now I have latest stock firmware from Linksys. Can I upgrade to Your firmware directly from Linksys firmware ?

I was try to use TomatoUSB , but there was issue with low speed on wifi connection (72Mb/sec on TomatoUSB, but 150Mb/sec on original software) That problem was not resolved and I return to stock firmware. Now I want to try Your release , because I like Tomato (it used on second router - Linksys WRT54GL).

Do zobaczenia, życzę wszystkiego najlepszego

Hi shibby I was trying out your latest build *AIO* and I can't find the overclock section for the RT-N16 cpu for 480MHz to 532MHz? did this get removed? and why?

@Nitro - i was never include O/C feature you can overclock cpu via nvram. This is only 3 commands and done.
http://tomatousb.org/tut:over-clocking-asus-rt-n16

@awer1967 - this router has 8MB flash memory well you can install MAX build. MAX has all my features! This is the same as AIO but only for router without USB port I haven`t linksys routers well i don`t want to make mistake and tell you a wrong way to flash tomato into wrt320n :/ Should be all good via GUI but better if someone who has Linksys router will confirm this.

Best Regards.

Thank You for good answer , it is nice for me ! Now I know which software I can use .

And I mean about my linksys flashing - there is two ways. One is to change software through from GUI and if router will not work correctly I always can restore it by the 30-30-30 procedure (I have such experience with linksys ) Second way is flash with TomatoUSB first and re-flash with Your Tomato. This way is more long but it seems more safely . Well , I will try this and write here about results - bad or good , no matter.

Do zobaczenia, życzę wszystkiego najlepszego

IT works !

I flash my WRT320N directly from GUI of native CISCO software.
The version of flash was

tomato-K26-1.28.RT-MIPSR2-097-Max

It works nice.

But there is one bug I seen on TomatoUSB previously.

This is wireless speed.

Let me explain this situation.

I have notebook with embedded Wifi -N adapter Atheros AR9285 (with last native drivers from Atheros). It connect to Inet through the my WRT320N . When it flash with native CISCO software speed WiFi connection is 150 Mb/sec, but on Tomato it falls to 72,2 Mbit/sec. I read a lot of forum messages and dig the packets and could not found WHY IT SHIT HAPPENS.

Anywhere , I stay on Tomato, because I need IPTV (native soft cannot works right with multicast).
But there is a hope that I will find decision.

Thanks a lot Shibby !

JugsteR, Shibby or anyone else, do you run transmission as optware or not? Some people claim it's more stable as optware.

Built-in 093, flawless. I'd expect 097 to be the same.

Signature? Signature!

from optware is more stable, i agree. I`m using build-in transmission but i dont download to much (more for tests).

Hello, shibby. Thank you again for a beautiful build of tomato. I have a question / request. I noticed that in start_transmission.sh you have this line:
rm /opt/.settings/blocklists/*
prezent even if in the GUI blocklist option si not checked. I am using a personal script to merge more blocklists and use with transmission. Is it possible to remove this line from the start-up script or to have a GUI option to manually edit the start-up script of transmission please? Thank you.

well i have to remove all blocklist files because if you already have bloclist and now you don`t want use it, then you can uncheck box and press save. Then i have to be sure there is no any of files in blocklists directory before i will sart transmission again. Right?

I will add more fields to add more blocklist links.

dear shibby,
is there still an table existing to compare the features of different builds.
If I do not use "transmission" - is BIG-VPN or MEGA VPN still the one with all other features ?

Any plans to further devellop the "openVPN" client - to be activated/deactivated via "internal IP request" inside the LAN for temporary usage of the VPN.
br zong

Hi,

After clearing NVRAM on RT-N12 running tomato-K26-1.28.RT-N5x-MIPSR2-097-Max the WLAN LED and WAN LED are swapped.
Plug in something to WAN port --> WLAN LED on.
Turn WLAN off --> WAN LED off

Is it possible to fix that?

I just obtained a Linksys E1550. So far the only firmware that I have found that works is ddwrt. I have tried your latest (tomato-E1550USB-NVRAM60K-1.28.RT-N5x-MIPSR2-095-AIO is one version I have tried) with no luck getting it to run.

I have recovered via serial port access and flashed back to ddwrt via the stopping of cfe and using upgrade command.

Both yours and toastmans 1550 builds don't seem get to to a point where I'm able to regain network access.

What can I do to help? dmesg first I suppose. ddwrt and yours to compare? and where to post?

I have done the usual resets, nvram erase etc..

Hi shibby,

a forum member just posted a patch of enabling IPsec support in your builds.
Would you please add this to your AIO builds?
http://www.linksysinfo.org/index.php?threads/tomato-and-ipsec-why-not.38344/#post-186747

Thanks

Hello, Shibby.

I managed to find a workaround for transmission blocklist and load the blocklists that I am interested in via my script. But I have a new request if it is not to hard and you have time. I am interested in a field present in Administration -> admin access where the user will be able to add extra options for dropbear. For instance I am interested in :
-w Disallow root logins
-g Disable password logins for root
-W <receive_window_buffer> (default 12288, larger may be faster, max 1MB)

Thank you once again for tomato and for your help.

Hi, I was wondering if you could add the number of connections to the system overview page?
Something like "Active Connections 435/16384"

+1 I like this Idea very much, when your checking status of a router the connections it has currently made seem more relevant than cpu usage or uptime.

[RELEASE] 099.

Changelog: http://tomato.groov.pl/?page_id=78

Best Regards!

great work again shibby. thank you

Thank you shibby...will install it later

When I enable dnscrypt-proxy my CPU load stays above 1.00. When I disable it goes down to 0.

Also, with dnscrypt-proxy on welcome.opendns.com reports that I'm not using OpenDNS

Shibby, I remember you said you're not a programmer. I installed you AiO for my new RT-N16, I I'd like to thank you for a well put-together firmware. I thought I'd have to do a lot of configuring transmission (my linux is weak), but It is easily configured from the web interface. No problems with the firmware, although transmission does crash periodically (I guess that's transmission's fault) (and it gets auto-restarted). I think you have at least a bit of programming experience to do this all.

099V is better/faster than 097V IMO but when dnscrypt-proxy is enabled the anti-ads script won't download/work.

Edit: Well, after many, many, many 30-30-30 resets and other "tinkering", I've managed to get into my Belkin Sharemax 300N and reset the NVRAM. Seems to be working now. Have to set it up again though.

Bricked my Belkin Sharemax 300N, which was running version Big 097. Was running Big 095 before that. Will try to figure it out later. Strange light patterns on the power on/status light.

Regardless, thanks Shibby.

issue of dnscrypt-proxy confirmed. I`ll be fixed in next release soon.

It's the same in 099.

can you make this?
http://www.dd-wrt.com/wiki/index.php/Broadcom_detection#Detecting_LED.C2.B4s_.28and_their_colors.29

Detecting LED´s

It also breaks DDNS.

dnsscrypt-proxy has problem also with 3G modem. When checked, very hard to establish connection and if connected, slowly killing web access.Kindly verify this matter also

ok will check

hmm Netgear 3500Lv2 + RT-N build100 + huawei 173 + T-mobile + dnscrypt-proxy = no issue

connected in the first time, dnscrypt works correct, internet speed is ok.

make a router reboot and all stay up without problem.

On build099 i will not test because dnscrypt has confirmed issue with 100% cpu usage
On 097 i will also not test because there is older 0.9.3 version of dnscrypt.

Using different sim provider, allows me to connect easily to 3g modem and surf successfully except for 1 url, http://repo.or.cz/w/tomato.git/shortlog/refs/heads/tomato-RT, it says gateway timeout.

Common problem for both sim card are having problem connecting using putty or winscp whenever dnscrypt-proxy is checked.

repo.or.cz was down yesterday

[RELEASE] build 100!!

tomato-E3000USB-NVRAM60K-1.28.RT-MIPSR2-100-Mega-VPN.bin - 8.2MB

E3000 only has 8MB flash

from build 088, mega-vpn is only for router with 16MB or more.

Seems Asuswrt-Merlin now has DualWAN support.

Shibby, I know you said before you don't know a whole lot about how to add DualWAN to your build, but perhaps his sources would help? I would LOVE to see this feature in your branch

Something else I would love to see would be the ability to set "Wireless" as one of the options under WAN/Internet on the Basic-->Network page as part of both single and DualWAN. Effectively making your WAN/Internet connection recieve internet wirelessely.

Thanks for your hard work shibby.

v100 running perfect on my E3000 and E4200. I really like the new Linksys Red color scheme.

One small tiny bug that I found. In Transmission web interface my torrent has "&darr" and "&uarr"
I believe this is for down arrow and up arrow? I first noticed this in 099. My torrents download fine.

Thanks, Shibby!

I had been using 87 for quite a while on my RT-N66U, a couple days ago decided to see what was new, first tomato-K26USB-1.28.RT-N5x-MIPSR2-099-AIO-64K and now tomato-K26USB-1.28.RT-N5x-MIPSR2-100-AIO-64K randomly reboot my router. Will have to go back to 87 I guess for stability.

mbrestin, 097 is fine.

Thanks will run 97 for awhile and check it out.

Is it possible to change the logging path of webmon?

Looks like there was a new miniDLNA (1.0.25) back on July 13. Has this been updated on your builds Shibby? The last time I see a miniDLNA update (v1.0.24) was build 87.

Guys...help please

I need to configure swap on my flash memory in order to use Tor.

I just installed Tomato Firmware 1.28.0000 MIPSR1-100 K26 USB Tor-VPN

ATTENTION!!

i found 2 big problems in tomato`s 099, 099.1 and 100

1) ipv6 doesn`t work. In all buildtype without AIO and Mega-VPN, ipv6 will not work. The problem is with ipsec support. sit.ko module needs xfrm modules as depends. Temporaty solutions are:
a) download extras modules package and load manually four modules:
insmod tunnel4.ko
insmod tunnel6.ko
insmod xfrm6_tunnel.ko
insmod xfrm4_tunnel.ko
b) dont use ipv6 for a while
c) return to 097.

2) Transmission doesn`t work. Transmission 2.61 needs libiconv library :/ Version 2.60 didn`t need this library. I have this library installed from optware well this was confuse me because build-in transmission works on my router :/ Temporary solution: install gettext package from optware.

I will fix those issues as soon as possible.

Best Regards.

There's also a memory leak causing random reboots in 099 and 100.

Thanks for the heads up shibby! I assume by what you say in item 1) that ipv6 WILL work if we are using AIO or Mega-VPN?

I can confirm IPv6 works in AIO.

I'm not getting these random reboots or any memory leak. From the other thread about the memory leak, I can confirm the services I don't use which the others are reporting having used. I currently DO NOT use: DNSCrypt. IPv6. OpenVPN. If you disable any or all of these, does it change anything?

I've tried turning DNSCrypt off, but it didn't help. I'd have tried IPv6, but I downgraded to 097 already which is very stable and has no memory fluctuations.

running version100 with DNSCrypt (on AsusN16) and have no access to this forum link (linksysinfo.org). Needed to go via my OpenVPN / will also check the normal DNS function.
Not sure if problem is with the new DNSCrypt implementation or with opendns itself.

I think OpenDNS is malfunctioning... their filter is apparently down.

Do you get this in logg from OPENDNS?

Code:

Aug 15 22:48:41 HOSTNAME daemon.info dnscrypt-proxy[5217]: Refetching server certificates
Aug 15 22:48:41 HOSTNAME daemon.info dnscrypt-proxy[5217]: Server certificate #1234567890 received
Aug 15 22:48:41 HOSTNAME daemon.info dnscrypt-proxy[5217]: This certificate looks valid
Aug 15 22:48:41 HOSTNAME daemon.info dnscrypt-proxy[5217]: Server key fingerprint is KEY REMOVED

I'm using it and it's working

Yup, but it's not blocking any sites on my "always block" list.

Okey
Then I suggest to reset router and add one options at the time and narrow what's problem.

I have used it for years with no trouble. I have one router with 100V-aio working right now.
Make sure you have assign IP-number and setup STATS in OpenDns.
Dnscrypt is only a secure tunnel to opendns nothing else.

thx for feedback. Need to correct my statement !!!!
Also without opendns (dynscript) - using my preferred university DNS, I have no access to "linksysyinfo.org".
I am using a view "filters" in access restriction , which should not the cause this problem. However I disabled those!
I also changed some small adaption to QoS in BasicSettings.
Independent - I can only access this forum via my tunnel (openVPN client.)
I think it is within "iptables". However I cleared the Ram before updating !
So will go back to 97 BigVPN. will let you know...
-----
Now running 97BigVPN and used my "config file" from the "100 Version"./ I wanted to know...
Works fine - however still no access to this forum pages /only via tunnel.
Are they maybe blocking "german" IPadresses ?
I not jet see any other problems /url not running. So will do noting for a while -and then maybe a new config per hand.... //
To note: I was running version 95 and have had access to this url a week before
-----
1) could an "error" in iptables" been "transferred" with the config file??) what you guess.
V100 to V97 ???

2) An other question to experts In all tomato builds the LAN (in UpnP or IGMO config)
ask to "activate" LAN and LAN1 by counting to LAN3.
My AsusN16 has 4 LAN ports (LAN1 , ... LAN4)
So how is LAN counting in tomato config (LAN = LAN4 // LAN1 = LAN1) ??
What is the preferred LAN port ( 1 or 4) for IPTV or video streaming ?

br thx

It was IPv6. Apparently, they don't do filtering over IPv6 yet.

Okey you find your issue. I didn't mention when you make rules to IPV6 then you have to do like this:
This is only example rules:

Code:

ip6tables -I FORWARD 1 -p icmpv6 -j DROP
ip6tables -I FORWARD 1 -p tcpv6 -j DROP
ip6tables -I FORWARD 1 -p udpv6 -j DROP

I just took out ipv6 dns entries.

sorry - I cleaned RAM / did reset and configured manually. Everything is unchanged ! Could not access THIS forumpage. Your answer with regard to ipv6. Do you maybe think that they are only available with ipv6 ? (which I not have activated). Not sure if I understood "Cyberian" correctly !
What is about the 6in4 via tunnelbroker. (my ISP not jet having nativ ipv6) Is this really a good idea and give me benefits in speed (compared to ipv4). Do we have experience here in the forum ?

Sorry, zong, I wasn't taking about your problem.

Tnk's shibby!!

wow thanks for including the themes! now I can just select them <3 you shibby

I'm running on 095 and my miniDLNA does not start automatically when the router (RT-N16) restarts/starts. The web interface shows it at stopped because the button is written "Start now" and my X360 cannot pick up my router's video. The miniDLNA processes are running after the router restarts; doing a "top" will show me 3 "minidlna -f /etc/minidlna.conf" processes. However, I must manually type "minidlna -f /etc/minidlna.conf" to start the service or go into the web interface and hit "Start now".

As a workaround, I have added "minidlna -f /etc/minidlna.conf" into the init script and now it starts succesfuly automatically. Could this be a bug ? I have not updated to latest version (100), because of the memory leak issue reported by many people in the latest versions.

Thank you.

@Shibby

I lovely tomato your mod very much. Now i working upcountry instead of normal ppoe connection via modem I don't have any more line. I buy 3G modem from ZTE MF190S (have micro-sd also) on Router H/W: Tomato Firmware 1.28.0000 MIPSR2-083V K26 USB Mega-VPN on RT-N10U. I try to read about 3G/WAN usb_switch but i can't fixed it by myself and here below my console logging. thank in advance for your help.

Code:

basic->wan->3G Modem
 
modem device->dev/ttyusb0
 
pin->nil
 
modem init->*99***1#
 
apn->etlnet
 
user->nil
 
password->nil
 
connection mode->keep alive
 
check interval->10
 
lsusb
 
Bus 001 Device 003: ID 19d2:2003
 
Bus 002 Device 001: ID 1d6b:0001
 
Bus 001 Device 001: ID 1d6b:0002
 
dmesg
 
Tomato v1.28.0000 MIPSR2-083V K26 USB Mega-VPN
 
root@JoJetta:/tmp/home/root# dmesg
 
Linux version 2.6.22.19 (root@tomato) (gcc version 4.2.4) #31 Mon Dec 5 16:34:55 CET 2011
 
CPU revision is: 00019749
 
Found an ST compatible serial flash with 128 64KB blocks; total size 8MB
 
Determined physical RAM map:
 
memory: 02000000 @ 00000000 (usable)
 
Entering add_active_range(0, 0, 8192) 0 entries of 256 used
 
Zone PFN ranges:
 
Normal 0 -> 8192
 
HighMem 8192 -> 8192
 
early_node_map[1] active PFN ranges
 
0: 0 -> 8192
 
On node 0 totalpages: 8192
 
Normal zone: 0 pages used for memmap
 
Normal zone: 0 pages reserved
 
Normal zone: 8192 pages, LIFO batch:1
 
HighMem zone: 0 pages used for memmap
 
Built 1 zonelists. Total pages: 8192
 
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
 
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
 
Primary data cache 32kB, 4-way, linesize 32 bytes.
 
Synthesized TLB refill handler (20 instructions).
 
Synthesized TLB load handler fastpath (32 instructions).
 
Synthesized TLB store handler fastpath (32 instructions).
 
Synthesized TLB modify handler fastpath (31 instructions).
 
PID hash table entries: 256 (order: 8, 1024 bytes)
 
CPU: BCM5357 rev 1 pkg 8 at 300 MHz
 
Using 150.000 MHz high precision timer.
 
console [ttyS0] enabled
 
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
 
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
 
Memory: 28632k/32768k available (33k kernel code, 4120k reserved, 2701k data, 124k init, 0k highmem)
 
Calibrating delay loop... 149.91 BogoMIPS (lpj=749568)
 
Mount-cache hash table entries: 512
 
NET: Registered protocol family 16
 
PCI: no core
 
PCI: no core
 
PCI: Fixing up bus 0
 
NET: Registered protocol family 2
 
Time: MIPS clocksource has been installed.
 
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
 
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
 
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
 
TCP: Hash tables configured (established 1024 bind 1024)
 
TCP reno registered
 
squashfs: version 3.0 (2006/03/15) Phillip Lougher
 
io scheduler noop registered (default)
 
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
 
N_HDLC line discipline registered.
 
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
 
serial8250: ttyS0 at MMIO 0xb8000300 (irq = 8) is a 16550A
 
PPP generic driver version 2.4.2
 
MPPE/MPPC encryption/compression module registered
 
NET: Registered protocol family 24
 
PPPoL2TP kernel driver, V0.18.3
 
PPTP driver version 0.8.5
 
pflash: found no supported devices
 
Creating 5 MTD partitions on "sflash":
 
0x00000000-0x00020000 : "pmon"
 
0x00020000-0x007f0000 : "linux"
 
0x00106c00-0x007a0000 : "rootfs"
 
0x007a0000-0x007f0000 : "jffs2"
 
0x007f0000-0x00800000 : "nvram"
 
u32 classifier
 
OLD policer on
 
Netfilter messages via NETLINK v0.30.
 
nf_conntrack version 0.5.0 (512 buckets, 4096 max)
 
ip_tables: (C) 2000-2006 Netfilter Core Team
 
ipt_account 0.1.21 : Piotr Gasidlo <quaker@barbara.eu.org>, http://www.barbara.eu.org/~quaker/ipt_account/
 
net/ipv4/netfilter/tomato_ct.c [Dec 3 2011 17:07:50]
 
NET: Registered protocol family 1
 
NET: Registered protocol family 10
 
ip6_tables: (C) 2000-2006 Netfilter Core Team
 
NET: Registered protocol family 17
 
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
 
All bugs added by David S. Miller <davem@redhat.com>
 
VFS: Mounted root (squashfs filesystem) readonly.
 
Freeing unused kernel memory: 124k freed
 
Warning: unable to open an initial console.
 
emf: module license 'Proprietary' taints kernel.
 
PCI: Setting latency timer of device 0000:00:02.0 to 64
 
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.9
 
wl_module_init: passivemode set to 0x0
 
PCI: Setting latency timer of device 0000:00:01.0 to 64
 
eth1: Broadcom BCM4329 802.11 Wireless Controller 5.100.138.9
 
Algorithmics/MIPS FPU Emulator v1.5
 
usbcore: registered new interface driver usbfs
 
usbcore: registered new interface driver hub
 
usbcore: registered new device driver usb
 
SCSI subsystem initialized
 
Initializing USB Mass Storage driver...
 
usbcore: registered new interface driver usb-storage
 
USB Mass Storage support registered.
 
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 
PCI: Setting latency timer of device 0000:00:04.1 to 64
 
ehci_hcd 0000:00:04.1: EHCI Host Controller
 
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
 
ehci_hcd 0000:00:04.1: irq 5, io mem 0x18004000
 
ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00
 
usb usb1: configuration #1 chosen from 1 choice
 
hub 1-0:1.0: USB hub found
 
hub 1-0:1.0: 2 ports detected
 
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 
PCI: Setting latency timer of device 0000:00:04.0 to 64
 
ohci_hcd 0000:00:04.0: OHCI Host Controller
 
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
 
ohci_hcd 0000:00:04.0: irq 5, io mem 0x18009000
 
usb usb2: configuration #1 chosen from 1 choice
 
hub 2-0:1.0: USB hub found
 
hub 2-0:1.0: 2 ports detected
 
usb 1-1: new high speed USB device using ehci_hcd and address 2
 
usb 1-1: configuration #1 chosen from 1 choice
 
scsi0 : SCSI emulation for USB Mass Storage devices
 
usbcore: registered new interface driver usblp
 
usblp: USB Printer Device Class driver
 
Registered led device: 1-1
 
vlan0: add 33:33:00:00:00:01 mcast address to master interface
 
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
 
vlan0: dev_set_allmulti(master, 1)
 
vlan0: dev_set_promiscuity(master, 1)
 
device eth0 entered promiscuous mode
 
device vlan0 entered promiscuous mode
 
device eth1 entered promiscuous mode
 
br0: port 2(eth1) entering forwarding state
 
br0: port 1(vlan0) entering forwarding state
 
vlan1: Setting MAC address to 54 04 a6 5a a3 01.
 
scsi 0:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
 
scsi 0:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
 
sd 0:0:0:1: [sda] 498176 512-byte hardware sectors (255 MB)
 
sd 0:0:0:1: [sda] Write Protect is off
 
sd 0:0:0:1: [sda] Mode Sense: 0f 0e 00 00
 
sd 0:0:0:1: [sda] Assuming drive cache: write through
 
sd 0:0:0:1: [sda] Assuming drive cache: write through
 
sd 0:0:0:1: [sda] Attached SCSI removable disk

Pls put your logs in CODE tag it's easyier to read too people.

Hello!
I ask you a question about Qos Classification: I `d like to make rules for these dst. ips : 192.168.1.2, 192.168.1.3 ...4,5 and so on.
I want make the same rule for these ips. Should I make a row rule for every ip, or is there another way to type them in, eg: 192.168.1.2/5 or 192.168.1.2,3,4,5 or 192.168.1.2-5 ?

Thanks!

I can only control two LEDs...

gpio disable 5 ENABLES WAN LED
gpio enable 5 DISABLES WAN LED
gpio disable 18 ENABLES POWER LED
gpio enable 18 DISABLES POWER LED

But why do the LEDs work correct the first time after upgrading from stock firmware?

I have a problem with multiSSID - I configured my router according to the teaman manual.

I see network, but I cannot connect to it

I have asus rt-16n, build 100AIO

thank you

btw - in wl0.1 i have a message - this MAC adress is ....

083V from a customer:



Also Shibby, the red Xs on Port Forwarding are messed up:

This is theme related, I will fix this and update the theme pack for Linksys/Asus Red for shibby

update: fixed, will pm new css to shibby which will hopefully be inlcuded in the next release

Awesome theme, thank you!

having Asus N16 and running first time AIO builds now with version100.
After installation, I have had 32% free NVRAM, now with all changes and the "openVPN client" config with keys, I have 6% ..... Is this ok ???
Total / Free Memory 123.87 MB / 112.79 MB (91.06%)
Total / Free NVRAM: 32.00 KB / 1936 (5.91%)

yes, it's ok - i have the same ~5.38% free NVRAM

I also have a problem with DNS-Crypt. The upload and download speed were slow when I turned DNS-Crypt on.

Btw, The wireless scheduler also didn't work in access point mode with DHCP disabled.

Unlike DD-Wrt firmware, it works every time even in access point mode, as it is based on uptime of the router not the time of the day.

Hope the next build can fix that problem. Thank you very much for your works, Shibby.

[RELEASE] v101

changelog: http://tomato.groov.pl/?page_id=78

Great news!

Just upgraded my 4 routers to 101. All is well although I admit that I don't do much with them.

One thing I noticed is the transfer speed between my E2000 Wireless Ethernet Bridge to my Belkin N600 router (5GHz) is faster and more steady (up to nearly 21MB (MBytes) per seconds). Also, the transfer is now steady in both directions whereas with 095, it was fast from the Belkin to the E2000 but very slow between the E2000 and the Belkin. Will monitor that over the days to see how it goes.

Thanks Shibby, jyavenard and all of the rest for your great contributions to the best router firmwares available.

Thanks Shibby

101-AIO-64K working great Thanks again shibby!

Are DualWAN sources not in the tomato git?

+1 for 101 - another great version. Thanks Shibby

Agreed, Thanks, jyavenard and shibby