1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato router time problem

Discussion in 'Tomato Firmware' started by TheSleeper, Aug 12, 2009.

  1. TheSleeper

    TheSleeper Guest

    Hi all,
    I am using Asus WL-520GU router and I switched from DD-wrt to tomato 1.25.1719 two days ago. I' m amazed by the noticeable increase in the network speed and resopnse with tomato firmware. Yet, there is a problem i am still not able to resolve: everytime the router is rebooted, time and date seem not saved inside the router.

    This is the time config:
    [​IMG]

    Here is the log, as you can see,the log time is not correct once it is rebooted:

    Jan 1 08:00:09 syslog.info syslogd started: BusyBox v1.14.0
    Jan 1 08:00:10 user.notice kernel: klogd started: BusyBox v1.14.0 (2009-05-25 16:02:43 PDT)
    Jan 1 08:00:10 user.warn kernel: CPU revision is: 00029029
    Jan 1 08:00:10 user.warn kernel: Primary instruction cache 16kb, linesize 16 bytes (4 ways)
    Jan 1 08:00:10 user.warn kernel: Primary data cache 16kb, linesize 16 bytes (2 ways)
    Jan 1 08:00:10 user.warn kernel: Linux version 2.4.20 (root@tobu) (gcc version 3.2.3 with Broadcom modifications) #1 Mon May 25 16:05:09 PDT 2009
    Jan 1 08:00:10 user.warn kernel: Setting the PFC to its default value
    Jan 1 08:00:10 user.warn kernel: Determined physical RAM map:
    Jan 1 08:00:10 user.warn kernel: memory: 01000000 @ 00000000 (usable)
    Jan 1 08:00:10 user.warn kernel: On node 0 totalpages: 4096
    Jan 1 08:00:10 user.warn kernel: zone(0): 4096 pages.
    Jan 1 08:00:10 user.warn kernel: zone(1): 0 pages.
    Jan 1 08:00:10 user.warn kernel: zone(2): 0 pages.
    Jan 1 08:00:10 user.warn kernel: Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
    Jan 1 08:00:10 user.warn kernel: CPU: BCM5354 rev 3 at 240 MHz
    Jan 1 08:00:10 user.warn kernel: Calibrating delay loop... 198.24 BogoMIPS
    Jan 1 08:00:10 user.info kernel: Memory: 14428k/16384k available (1371k kernel code, 1956k reserved, 108k data, 64k init, 0k highmem)
    Jan 1 08:00:10 user.info kernel: Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
    Jan 1 08:00:10 user.info kernel: Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
    Jan 1 08:00:10 user.warn kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Jan 1 08:00:10 user.warn kernel: Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Jan 1 08:00:10 user.warn kernel: Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
    Jan 1 08:00:10 user.warn kernel: Checking for 'wait' instruction... unavailable.
    Jan 1 08:00:10 user.warn kernel: POSIX conformance testing by UNIFIX
    Jan 1 08:00:10 user.warn kernel: PCI: no core
    Jan 1 08:00:10 user.warn kernel: PCI: Fixing up bus 0
    Jan 1 08:00:10 user.info kernel: Linux NET4.0 for Linux 2.4
    Jan 1 08:00:10 user.info kernel: Based upon Swansea University Computer Society NET3.039
    Jan 1 08:00:10 user.warn kernel: Initializing RT netlink socket
    Jan 1 08:00:10 user.warn kernel: Starting kswapd
    Jan 1 08:00:10 user.info kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    Jan 1 08:00:10 user.info kernel: devfs: boot_options: 0x1
    Jan 1 08:00:10 user.info kernel: squashfs: version 3.0 (2006/03/15) Phillip Lougher
    Jan 1 08:00:10 user.warn kernel: pty: 256 Unix98 ptys configured
    Jan 1 08:00:10 user.info kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
    Jan 1 08:00:10 user.info kernel: ttyS00 at 0xb8000300 (irq = 3) is a 16550A
    Jan 1 08:00:10 user.info kernel: ttyS01 at 0xb8000400 (irq = 0) is a 16550A
    Jan 1 08:00:10 user.warn kernel: HDLC line discipline: version $Revision: 1.1.1.4 $, maxframe=4096
    Jan 1 08:00:10 user.info kernel: N_HDLC line discipline registered.
    Jan 1 08:00:10 user.info kernel: PPP generic driver version 2.4.2
    Jan 1 08:00:10 user.debug kernel: Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
    Jan 1 08:00:10 user.debug kernel: Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
    Jan 1 08:00:10 user.debug kernel: Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
    Jan 1 08:00:10 user.debug kernel: Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
    Jan 1 08:00:10 user.debug kernel: Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
    Jan 1 08:00:10 user.debug kernel: Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
    Jan 1 08:00:10 user.debug kernel: Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
    Jan 1 08:00:10 user.notice kernel: Amd/Fujitsu Extended Query Table v1.1 at 0x0040
    Jan 1 08:00:10 user.notice kernel: number of CFI chips: 1
    Jan 1 08:00:10 user.notice kernel: Flash device: 0x400000 at 0x1c000000
    Jan 1 08:00:10 user.notice kernel: Creating 5 MTD partitions on "Physically mapped flash":
    Jan 1 08:00:10 user.notice kernel: 0x00000000-0x00020000 : "pmon"
    Jan 1 08:00:10 user.notice kernel: 0x00020000-0x003f0000 : "linux"
    Jan 1 08:00:10 user.notice kernel: 0x000c710c-0x002f0000 : "rootfs"
    Jan 1 08:00:10 daemon.info pppoe[69]: Starting
    Jan 1 08:00:10 daemon.info pppoe[69]: Sending PADI.
    Jan 1 08:00:10 user.notice kernel: 0x002f0000-0x003f0000 : "jffs2"
    Jan 1 08:00:10 user.notice kernel: 0x003f0000-0x00400000 : "nvram"
    Jan 1 08:00:10 user.err kernel: sflash: found no supported devices
    Jan 1 08:00:10 user.info kernel: NET4: Linux TCP/IP 1.0 for NET4.0
    Jan 1 08:00:10 user.info kernel: IP Protocols: ICMP, UDP, TCP, IGMP
    Jan 1 08:00:10 user.info kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
    Jan 1 08:00:10 user.info kernel: TCP: Hash tables configured (established 1024 bind 2048)
    Jan 1 08:00:10 user.info kernel: Linux IP multicast router 0.06 plus PIM-SM
    Jan 1 08:00:10 user.warn kernel: ip_conntrack version 2.1 (8092 buckets, 4096 max) - 368 bytes per conntrack
    Jan 1 08:00:10 user.warn kernel: ip_tables: (C) 2000-2002 Netfilter core team
    Jan 1 08:00:10 user.info kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    Jan 1 08:00:10 user.info kernel: NET4: Ethernet Bridge 008 for NET4.0
    Jan 1 08:00:10 user.alert kernel: 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
    Jan 1 08:00:10 user.alert kernel: All bugs added by David S. Miller <davem@redhat.com>
    Jan 1 08:00:10 user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
    Jan 1 08:00:10 user.info kernel: Mounted devfs on /dev
    Jan 1 08:00:10 user.info kernel: Freeing unused kernel memory: 64k freed
    Jan 1 08:00:10 user.warn kernel: Algorithmics/MIPS FPU Emulator v1.5
    Jan 1 08:00:10 user.warn kernel: ip_conntrack_pptp version 1.9 loaded
    Jan 1 08:00:10 user.warn kernel: ip_nat_pptp version 1.5 loaded
    Jan 1 08:00:10 user.warn kernel: ip_conntrack_rtsp v0.01 loading
    Jan 1 08:00:10 user.warn kernel: ip_nat_rtsp v0.01 loading
    Jan 1 08:00:10 user.warn kernel: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.130.25.0
    Jan 1 08:00:10 user.warn kernel: eth1: Broadcom BCM4318 802.11 Wireless Controller 4.130.19.0
    Jan 1 08:00:10 user.warn kernel: tomato_ct.c [May 25 2009 16:06:53]
    Jan 1 08:00:10 daemon.info pppoe[69]: Received PADO.
    Jan 1 08:00:10 user.info kernel: vlan0: dev_set_promiscuity(master, 1)
    Jan 1 08:00:10 user.info kernel: device eth0 entered promiscuous mode
    Jan 1 08:00:10 user.info kernel: device vlan0 entered promiscuous mode
    Jan 1 08:00:10 user.info kernel: device eth1 entered promiscuous mode
    Jan 1 08:00:10 user.info kernel: br0: port 2(eth1) entering learning state
    Jan 1 08:00:10 user.info kernel: br0: port 1(vlan0) entering learning state
    Jan 1 08:00:10 user.info kernel: br0: port 2(eth1) entering forwarding state
    Jan 1 08:00:10 user.info kernel: br0: topology change detected, propagating
    Jan 1 08:00:10 user.info kernel: br0: port 1(vlan0) entering forwarding state
    Jan 1 08:00:10 user.info kernel: br0: topology change detected, propagating
    Jan 1 08:00:10 user.warn kernel: vlan1: Setting MAC address to 00 XX XX XX XX XX.
    Jan 1 08:00:10 daemon.info pppoe[69]: Sending PADR.
    Jan 1 08:00:10 daemon.info pppoe[69]: Received PADS. SID: 0xDB05
    Jan 1 08:00:10 daemon.info pppoe[69]: Sending LCP Configuration-Request
    Jan 1 08:00:10 daemon.info pppoe[69]: Received LCP Configuration-Request
    Jan 1 08:00:10 daemon.info pppoe[69]: Sending LCP Configuration-Ack
    Jan 1 08:00:10 daemon.info pppoe[69]: Received LCP Configuration-Ack
    Jan 1 08:00:10 daemon.info pppoe[69]: Sending PAP Authenticate-Request.
    Jan 1 08:00:10 daemon.info pppoe[69]: PAP authentication succeeded.
    Jan 1 08:00:10 daemon.info pppoe[69]: Sending IPCP Configuration-Request
    Jan 1 08:00:10 daemon.info pppoe[69]: Received IPCP Configuration-Nak
    Jan 1 08:00:10 daemon.info pppoe[69]: Sending IPCP Configuration-Request
    Jan 1 08:00:10 daemon.info pppoe[69]: Received IPCP Configuration-Request
    Jan 1 08:00:10 daemon.info pppoe[69]: Sending IPCP Configuration-Ack
    Jan 1 08:00:10 daemon.info pppoe[69]: Received IPCP Configuration-Ack
    Jan 1 08:00:10 daemon.notice pppoe[69]: Connected.
    Jan 1 08:00:10 daemon.notice pppoe[69]: IP Address: XXX.237.XXX.240
    Jan 1 08:00:10 daemon.notice pppoe[69]: DNS Address: XXX.102.XXX.110, XXX.102.XXX.77
    Jan 1 08:00:11 daemon.info dnsmasq[85]: started, version 2.47 cachesize 150
    Jan 1 08:00:11 daemon.info dnsmasq[85]: compile time options: no-IPv6 GNU-getopt no-RTC no-DBus no-I18N no-TFTP
    Jan 1 08:00:11 daemon.info dnsmasq[85]: DHCP, IP range 192.168.1.2 -- 192.168.1.5, lease time 1d
    Jan 1 08:00:11 daemon.info dnsmasq[85]: reading /etc/resolv.dnsmasq
    Jan 1 08:00:11 user.info mount-cifs[86]: notice: Mounting...
    Jan 1 08:00:11 daemon.info dnsmasq[85]: using nameserver XXX.102.XXX.77#53
    Jan 1 08:00:11 daemon.info dnsmasq[85]: using nameserver XXX.102.XXX.110#53
    Jan 1 08:00:11 daemon.info dnsmasq[85]: read /etc/hosts - 0 addresses
    Jan 1 08:00:11 daemon.info dnsmasq[85]: read /etc/hosts.dnsmasq - 1 addresses
    Jan 1 08:00:12 cron.err crond[91]: crond (busybox 1.14.0) started, log level 9
    Jan 1 08:00:12 user.info init[1]: Tomato 1.25.1719
    Jan 1 08:00:12 user.info init[1]: Asus WL-520GU
    Jan 1 08:00:12 daemon.info dnsmasq[85]: exiting on receipt of SIGTERM
    Jan 1 08:00:12 daemon.info dnsmasq[97]: started, version 2.47 cachesize 150
    Jan 1 08:00:13 daemon.info dnsmasq[97]: compile time options: no-IPv6 GNU-getopt no-RTC no-DBus no-I18N no-TFTP
    Jan 1 08:00:13 daemon.info dnsmasq[97]: DHCP, IP range 192.168.1.2 -- 192.168.1.5, lease time 1d
    Jan 1 08:00:13 daemon.info dnsmasq[97]: reading /etc/resolv.dnsmasq
    Jan 1 08:00:13 daemon.info dnsmasq[97]: using nameserver XXX.102.XXX.77#53
    Jan 1 08:00:13 daemon.info dnsmasq[97]: using nameserver XXX.102.XXX.110#53
    Jan 1 08:00:13 daemon.info dnsmasq[97]: read /etc/hosts - 0 addresses
    Jan 1 08:00:13 daemon.info dnsmasq[97]: read /etc/hosts.dnsmasq - 1 addresses
    Jan 1 08:00:13 daemon.info httpd[102]: Generating SSL certificate...
    Jan 1 08:00:13 daemon.notice miniupnpd[108]: HTTP listening on port 5000
    Jan 1 08:00:13 daemon.notice miniupnpd[108]: Listening for NAT-PMP traffic on port 5351
    Jan 1 08:00:13 daemon.err miniupnpd[108]: chain upnp not found
    Jan 1 08:00:15 daemon.err miniupnpd[108]: chain upnp not found
    Jan 1 08:00:17 user.info rcheck[131]: Time not yet set. Only "all day, everyday" restrictions will be activated.
    Jan 1 08:00:18 daemon.notice miniupnpd[108]: received signal 15, good-bye
    Jan 1 08:00:18 user.info kernel: device br0 entered promiscuous mode
    Jan 1 08:00:18 daemon.notice miniupnpd[151]: HTTP listening on port 5000
    Jan 1 08:00:18 daemon.notice miniupnpd[151]: Listening for NAT-PMP traffic on port 5351


    I need help
    Thx
     
  2. fyellin

    fyellin LI Guru Member

    The first question everyone asks. When you switched firmware, did you remember to clear the NVRAM (Administration > Configuration > Restore Default Configuration > Erase All Data) before setting your own configurations? Forgetting to do this can cause all sorts of obscure and hard-to-debug problems.

    If you did clear the NVRAM and you're still seeing this problem. What do you see when you log into the router (telnet or ssh) and run "ntpsync"
     

Share This Page