1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato Shibby's Releases

Discussion in 'Tomato Firmware' started by shibby20, Feb 26, 2011.

  1. Elfew

    Elfew Addicted to LI Member

    Ports are mapped wrong, maybe?
     
  2. Frequenzy

    Frequenzy Networkin' Nut Member

    for N10U i believe Shibby already fixed port mapping on build 105.
     
  3. shibby20

    shibby20 Network Guru Member

    ports are mapped ok. Problem is with vlans, because not all routers have port0 as WAN and ports 1,2,3,4 as LAN. Someone have LAN ports as 4.3.2.1 and 0 as WAN or even 3,2,1,0 as LAN and 4 as WAN. Robocfg always shows ports from 0 to 4 (port 5 or 8 is a internal port).

    @kysfazij - dont worry. I added "invert ports" options in GUI :)
    I also added option to disable this function (if someone don`t like 2-3 secs delay on overview page).
    3rd option will be disable description (info about speed) and leave only ports icons - this is for router with wrong speed port detections like RT-N15U.
     
    Elfew likes this.
  4. Elfew

    Elfew Addicted to LI Member

    Excellent. One more question about lan ports- is possible to show IP adresses or device names of clients which are connected to LAN ports? Maybe next option for this.

    Second question - what about add next feature - show all devices connected to the router? In device list split this list to two ones. The first one will show only connected devices which are online... the second one will show all devices.

    Third question - what about temperature? ;) what is your opinion to my last one post with color value of temperature? (It could save us from useless topics about high temperature of router)

    Thank you Shibby for your hard work, I can send you my simple concept to make device list more user friendly.
     
  5. Jason Jordan

    Jason Jordan Serious Server Member

    I hate to be that guy... you know, the noob that asks old-already-answered questions, but...

    Does anyone have a decoder ring for the various images naming versions of Tomato Shibby? The page describing it http://tomato.groov.pl/?page_id=66 is in Polish only and the English link at the top goes to a page stating that it is in progress.

    I have a Linksys WRTSL54GS that I'd like to install the latest and greatest Tomato Shibby on... I'm just not sure which file to use.

    Thanks in advance for any help you can provide.

    jasonjordan
     
    Sean L likes this.
  6. zorkmta

    zorkmta LI Guru Member

    Hi, I have questions if I come from original firmware E4200, only flash directly via web guía?

    Enviado desde mi HTC One X usando Tapatalk 2
     
  7. tvlz

    tvlz Addicted to LI Member

    If it was added to the Vlan page instead of the Overview page it would be possible to compare the robocfg ports to the known vlan port mapping
    It will be more useful with the correct port mapping & on the Vlan page.

    Is this the version of robocfg you are using if not, might it help with the RT-N15U?
     
  8. Mangix

    Mangix Networkin' Nut Member

    http://tomato.groov.pl/download/K24/build5x-105-EN/

    I would say anything that is less than 4MB in size. And probably not the USB builds as that router does not have a USB port(at least I don't think so).

    As for the page, google translate works.
     
  9. kysfazij

    kysfazij Serious Server Member

    I believe YOU DO NOT ACTUALLY set VLAN in N10U on Shibby 105

    VLAN Port4=N10U's LAN1

    沒有試過還在那裏講屁話,這種人還真多啊

    頗ㄏ
     
  10. _NemO_

    _NemO_ Networkin' Nut Member

    Hi, shibby20!
    Does CTF (Cut-Through Forwarding) work on RT-N16 and RT-N12? I am using K26 builds on both.
    Code:
    cat /proc/sys/net/ipv4/netfilter/ip_conntrack_fastnat
    returns 1 but I don't see reduction of CPU load.
    And do will new K26 builds be available for routers with 4MB flash?
     
  11. Gitsum

    Gitsum LI Guru Member

    Not sure why but since upgrading to 105, my internet seems sluggish and cpu load is a lot higher than normal... ASUS RT-N66U, 100/5 mbit connection.

    Back to 104
     
  12. Elfew

    Elfew Addicted to LI Member

    I checked openlinksys forum, so stealth mode will be available in 106 build in scheduler :))))

    what about temperature info? build 106 will be full of new features I guess :)) Good job shibby20... maybe some info for us on this forum?

    I can speak Polish a little bit, because I live close to the Poland but others not :)
     
    Fredrik likes this.
  13. eahm

    eahm LI Guru Member

    Google Translate? :)
     
  14. Elfew

    Elfew Addicted to LI Member

    Yeah maybe :) But you know how it works... sometimes it is really funny when you translate it in google translate :)))

    anyway, I will check openlinksys more often ;)
     
  15. zorkmta

    zorkmta LI Guru Member

    I having problem and getting reboot with BT, i have a RT-N66U and other E4200 both with AIO 104 version. Mounted as NTFS or FAT32 a externarl hardisk and going in GUI BT, all fine and starting download, but after 1 min, router don´t responds and need to power off and restarted manually. Without BT all stable and work, but want BT feature

    Are the any guide for BT?
     
  16. eahm

    eahm LI Guru Member

    Shibby, on http://192.168.1.1/advanced-misc.asp the WAN Port Speed only goes up to 100Mbps, is there a way you can please activate 1Gbps since some routers have Gbps WAN? >100Mbps cable connections are coming really fast here in west USA.

    Thanks.
     
  17. JugsteR

    JugsteR Serious Server Member

    Not to mention, in Sweden we've had then for years. :)

    Signature? Signature!
     
  18. eahm

    eahm LI Guru Member

    Well, fuck screw you :D
     
  19. jakey

    jakey Networkin' Nut Member

    This has cropped up somewhere on the forum before, can't remember where but the outcome was that it does connect to the modem at 1Gbps on auto.

    Check your modem status as mine does show it to be correct

    [​IMG]
     
    eahm likes this.
  20. eahm

    eahm LI Guru Member

    I have a Motorola, it doesn't specify the speed, just Operational.
     
  21. Elfew

    Elfew Addicted to LI Member

    Set to auto

    But there should be an option 1000mbit
     
  22. eahm

    eahm LI Guru Member

    Yes that's what I was saying, it's already on Auto, I was talking about the modem :)

    Thanks for checking and show me that screenshot.
     
  23. Elfew

    Elfew Addicted to LI Member

    You should check the firmware features before you post your topic about features mate :))) Tomato FW is really rich on features
     
  24. eahm

    eahm LI Guru Member

    Elfew, I've been using Tomato for many years, I know the features that it includes but it lacks of the ones I listed, either way I wouldn't have listed them.
     
  25. GhaladReam

    GhaladReam Network Guru Member

    Shibby, has there been any progress made on this? It would be hugely beneficial and convenient for me if I was able to connect to my workplace VPN (which uses Cisco IPSec) using your firmware.
     
  26. shibby20

    shibby20 Network Guru Member

  27. GhaladReam

    GhaladReam Network Guru Member

    Unfortunately I don't know the first thing about git repositories or patching this into firmware binaries.. Is it not possible for this "patch" be implemented and a simple GUI built?
     
  28. shibby20

    shibby20 Network Guru Member

    my tomato has already all that patches. All my builds have added ipsec support but only Mega and AIO builds has build-in all modules. If you have other build installed then you have to download extras package and load all needed modules manually (all modules are in extras/ipsec/ directory. Then you need entware and install strongswan package (from optware is broken). Configure swan package and done (readed, untested myself ;) )
     
  29. Rajesh

    Rajesh Serious Server Member

    Hello, the BitTorrent client looks great but... I would like to set up a non password access. I want to offer the tool for my children and I don't want to use the administration account.

    Any advaice?

    Thanks in advance
     
  30. shibby20

    shibby20 Network Guru Member

    just uncheck "Authentication required" thats all.

    you don`t have to. Transmission GUI password (and username) can be set different than Tomato GUI (admin/root) password.
     
  31. Rajesh

    Rajesh Serious Server Member

    Yessss, I'm sorry, you are right. I forgot where was the dialog to set up this :(

    Thanks shibby
     
  32. cliff

    cliff Serious Server Member

    recently i purchase my Asus n15u and flashed the shibby firmware

    It is working very well, however, i have noticed that the N wireless is quite unstable. will n mode wireless i can only get around 1.5Mbps and the speed fluctuate.

    Then i try to use g only mode then it is all fine.

    Is there any fix i can try to use the wireless n? seems the tomato firmware does not work quite well with the N15U wireless-N

    Thanks
     
  33. lefty

    lefty Networkin' Nut Member

    You are not really providing enough info here to troubleshoot your wireless problem, i'd like to say if you switching it to G and everything works fine, then i'd like to say when you run it in N modem you are using HT40 and having major overlap/blocking to someone else's wireless that is causing thruput degradation, but i really can't say this for sure because there is not enough info here to know..
     
  34. kysfazij

    kysfazij Serious Server Member

    The same problem with N10U Shibby&Toastman Version with PPPoE WAN

    http://digiland.tw/viewtopic.php?pid=11597#p11597
     
  35. Suva

    Suva Addicted to LI Member

    I have never used Shibby's build before and like to try this today. What's the diff between Shibby's builds like Mega/Big/AIO etc?
     
  36. jeonny

    jeonny Serious Server Member

    any news of build 106?
     
  37. Elfew

    Elfew Addicted to LI Member

    no ETA :) They make this FW in their free time, so wait!
     
  38. eahm

    eahm LI Guru Member

  39. Suva

    Suva Addicted to LI Member

  40. shibby20

    shibby20 Network Guru Member

    i used N15 myself and i never had any problems with wifi (wireless card Intel 5100)

    i`ts compiling at the moment. Should be today or tomorrow :)
     
    Elfew, Fredrik, CBR900 and 1 other person like this.
  41. kysfazij

    kysfazij Serious Server Member

    What is your ISP WAN type?PPPoE or DHCP?
     
  42. shibby20

    shibby20 Network Guru Member

    DHCP but i dont see relationship between WAN type and Wireless connection/
     
    Elfew likes this.
  43. kysfazij

    kysfazij Serious Server Member

    In My real test(TWO ISPs,In Taiwan the biggest ISP(85% market share) provide PPPoE WAN service,so it is easy to discover this problem)

    DHCP WAN is no problem...BUT PPPoE WAN get problem...

    Wired works ALL fine,both PPPoE&DHCP WAN

    This is my first time to meet Strange problem like this(other IP share OK)

    NOT ONLY MY RESULT SHOWS IT

    AND you need to notice only in wireless N mode and FTP protocol


    N10U+hinet(PPPoE)+wireless N=>have FTP Protocol very slow problem

    N10U+hinet(PPPoE)+wireless B/G=>NO problem

    @@
     
  44. leandroong

    leandroong Addicted to LI Member

    sound like there is bug in N mode. So many reported problems on N mode here. Hopefully, Shibby can miraculously find and heal the issue ;)
     
  45. kthaddock

    kthaddock Network Guru Member

  46. kysfazij

    kysfazij Serious Server Member

  47. Frequenzy

    Frequenzy Networkin' Nut Member

    great news :) preview of changelog..
     
  48. kysfazij

    kysfazij Serious Server Member

  49. shibby20

    shibby20 Network Guru Member

    eahm and Elfew like this.
  50. Elfew

    Elfew Addicted to LI Member

    Flashed on RT-16n... thank you!
     
  51. Mirko Baila

    Mirko Baila Networkin' Nut Member

    Thank you! ;)
     
  52. jakey

    jakey Networkin' Nut Member

    Thanks, is 3G fixed now ?
     
  53. kysfazij

    kysfazij Serious Server Member

    The same problem with Shibby 106
    [​IMG]

    I propose to add the LAN port number
    [​IMG]
     
  54. _NemO_

    _NemO_ Networkin' Nut Member

    shibby20
    Thank you!
    RT-N is faster then RT (WAN-LAN or USB-LAN) on Asus RT-N16.
     
  55. lefty

    lefty Networkin' Nut Member

    shibby: no E3200 or E2500 builds for 106?
     
  56. shibby20

    shibby20 Network Guru Member

    :/ probably i forgot push 3G fix to git and problem with 3G still exist :( i have to check this.
     
  57. shibby20

    shibby20 Network Guru Member

    @lefty - check one more time ;)
     
  58. vlads

    vlads Serious Server Member

    @shibby - any chance of a VPN/MiniVPN build for MIPS2 routers with only 4MB flash (ie WRT310Nv2, M10 etc).
     
  59. Elfew

    Elfew Addicted to LI Member

    Temperature info :))) and numbers for LAN ports :)... 3G is not working for me. Do you have any info from Victek and his new captive portal?
     
  60. shibby20

    shibby20 Network Guru Member

    1) Temp info will me maybe in next release. I was not even start this feature ;)
    2) LAN ports - i can do that
    3) 3G - sh*t i have to push this to git. Will be in next release :/ sorry
    4) No i havent.

    @vlads - i will make miniVPN images today.
     
    Elfew likes this.
  61. kthaddock

    kthaddock Network Guru Member

    I have loaded 106-aio and Upnp seems to work but open port doesn't shows on page Forwarded Ports.
     
  62. Elfew

    Elfew Addicted to LI Member

    1) It would be awesome :)
    2) I think it is only a cosmetic but it should be there
    3) Nevermind, it happens sometimes :)))
    4) Thank you. Victek keeps this feature and changelog for himself :D
     
  63. shibby20

    shibby20 Network Guru Member

    i will check this later.
     
  64. vlads

    vlads Serious Server Member

    @shibby - I tried to flash the new K26/MIPS2 MiniVPN build on a couple of MIPS2 4MB routers and both give
    File is too big to fit in MTD
    .
     
  65. kthaddock

    kthaddock Network Guru Member

    Okey I was in a hurry.
    I have checked with putty under
    and no Upnp port forwarded.
     
  66. Riddlah

    Riddlah Networkin' Nut Member

    confirmed, doesn't look like upnp is working. port forwards are working but not showing.
     
  67. kthaddock

    kthaddock Network Guru Member

    Manually portforwarding working and shows under Chain WAN in when login with putty.

    And thanks for turn DEBUG mode OFF for PPTP
     
  68. kthaddock

    kthaddock Network Guru Member

    Realy nice SPEED up/download from samba on RT-N16.
    13MB/sek download and 14MB/sek upload
     

    Attached Files:

    Fredrik likes this.
  69. casula

    casula Serious Server Member

    @shibby: thanks for this nice build :)
    I think I found a bug. I'm using tomato-E3200USB-NVRAM60K-1.28.RT-N5x-MIPSR2-106-AIO (Linksys E3200):
    If I disable Core USB Support via Web Interface, router gets unresponsive for some seconds. If I reload page interface comes back. But then
    1. Wireless 5Ghz disappeard
    2. APC UPS Status: /tmp/.wxDLxghn: line 5: ./ext/cgi-bin/tomatoups.cgi: not found
    APC UPS Response: /tmp/.wxVPCdCR: line 5: ./ext/cgi-bin/tomatodata.cgi: not found
    Tried to reboot but no change.
    After erasing NVRAM via web interface everything is fine again.
    I think bug was already present in 105.
    If you need any logs please advise.
     
  70. Elfew

    Elfew Addicted to LI Member

    I found a bug -> in 106AIO RT-N build for tr-16n -> go to Access Restriction and try to add new rule -> it doesnt work, it shows: this page doenst exist
     
  71. PetervdM

    PetervdM Network Guru Member

    thx for the 106 AIO fw!
    running on E4200v1 i noticed trouble with the displaying / release / renew of the wan dhcp lease.
    after boot, the remaining lease time is about 2 minutes, and counts down to zero, and stays there. the logfile displays: Lease of xxx.xxx.xxx.xxx obtained, lease time 323397 ( default wan lease time is 7 days ). release button doesn't seem to do anything, although the logfile displays: udhcpc[1024]: Entering released state, there is still internet connectivity.
    the renew button causes the status to be displayed as "renewing ..." for ever ( page refresh time 3 seconds ).
    went back to v105 and everything is OK again.

    the logfile is still being cluttered with line like these: user.info init[1]: VPN_LOG_NOTE: 533: VPN Server 1 already running...
    can we please get rid of these??
     
  72. leandroong

    leandroong Addicted to LI Member

    ZTE ZXV10 H618B
    Tomato Firmware 1.28.0000 MIPSR1-106 K26 USB Big-VPN
    @Shibby,
    Ethernet Port State:
    1. WAN is displayed as 10M Half, corect? This is connected to bridge modem.
    2. Addl AP is displayed as 100M Full which is correct.
     
  73. jeonny

    jeonny Serious Server Member

    Note:
    - Robocfg is not perfect and it`s not fully support all routers with Tomato. On some gigabits routers, 1Gbit connections can be displayed as 10M. It`s a robocfg fault. You can disable speed info from GUI.
    http://tomato.groov.pl/?page_id=78
     
  74. AOS_1

    AOS_1 Serious Server Member

    Updated to 106 everything OK but I still have a small problem.

    Bandwith usage stats don't work since I updated to 105, they stopped recording since the day of the upgrade.

    One thing I notice is that in "Last 24h" there's no WAN tab visible. Real-Time page works OK.


    Regards.
     
  75. kthaddock

    kthaddock Network Guru Member

    Working fine here. Can add and remove rules (using FF 18.0.2)
     
  76. eahm

    eahm LI Guru Member

    Also had the same problem before, not working with Chrome and working with IE.
     
  77. leandroong

    leandroong Addicted to LI Member

    Minor bug discover too. usb camera not display as detected but when I run mjpg-streamer, it display the image. First time, that I saw it like this. Is there a usb command that would force refresh all USB reading besides the one located on the GUI? I notice that there is instances, when I'm playing music from external usb hd and command router to reboot, I will not get that usb hd mounted, need to unplug usb cable and reattach to different usb ports to get detected.
     
  78. kthaddock

    kthaddock Network Guru Member

    On RT-N16 is stealt mode on-off reversed eg on is off and off is on.
    Code:
    #!/bin/sh
     
    # Turn off/on all led for routers RT-N16 and RT-N66U
     
    N16=`nvram get t_model_name | grep RT-N16 | wc -l`
    N66U=`nvram get t_model_name | grep RT-N66U | wc -l`
     
    if [ "$N16" == "1" -o "$N66U" == "1" ]; then
        case "$1" in
            on)
                et robowr 0x00 0x18 0x1e0
                et robowr 0x00 0x1a 0x1e0
                wl -i eth1 leddc 1
     
                if [ "$N66U" == "1" ]; then
                    wl -i eth2 leddc 1
                    gpio enable 12 #power led
                    gpio enable 15 #usb led
                else
                    gpio enable 1 #power led
                fi
            ;;
            off)
                et robowr 0x00 0x18 0x1ff
                et robowr 0x00 0x1a 0x1ff
                wl -i eth1 leddc 0
     
                if [ "$N66U" == "1" ]; then
                    wl -i eth2 leddc 0
                    gpio disable 12 #power led
                    gpio disable 15 #usb led
                else
                    gpio disable 1 #power led
                fi
            ;;
            *)
                echo $"Usage: $0 {on|off}"
                exit 1
     
        esac
     
    else
        echo "Router does not supported by this script"
    fi
    
     
  79. Elfew

    Elfew Addicted to LI Member

    But last version was working with google chrome...
     
  80. cliff

    cliff Serious Server Member

    i have always tried using 20Mhz first, while using 20Mhz gave me the problem i stated above, using 40Mhz gave me a worse result. Using speedtest.net i can see the speed drop to none just after the test start

    I am currently using PPPoE. setting up just using the default setting. the problem only appear when wirelss n mode is used.

    Thanks

    sorry for my english as it is not my first language
     
  81. Elfew

    Elfew Addicted to LI Member

    No problems with wifi on my rt-16n wirt rtn build
     
  82. PainMaker

    PainMaker Networkin' Nut Member

    Shibby and PetervdM:

    Same problem here E4200v1
    My ISP lease time is 24hs

    When I reboot v106 (lease time 3min 10 seg) the real lease time is 24hs
    [​IMG]

    Renew dont work... for ever status renewing (no internet)
    [​IMG]

    In version 105 working all ok here the lease time is 24hs and release and renew y working ok
    [​IMG]

    Port Status:
    Working OK In E4200v1 1000mbit display
    Reverse port= Enable
     
  83. lefty

    lefty Networkin' Nut Member

    106 seems working fine on E3200, thank you!
     
  84. Mangix

    Mangix Networkin' Nut Member

    I concur with vlads that 4MB images are too big. at least the E1200 one is.

    request: update DNSCrypt to 1.3.0. Many bugfixes I guess.
     
  85. shibby20

    shibby20 Network Guru Member

    You can`t disable USB support on this router. 2nd radio is a USB Wireless adapter well USB support HAS TO BE ON - always.
    About APC - you haven`t connected APC UPS Power supply well apcupsd daemon can`t get status well APC UPS page shows you those errors.


    i checked on IE9, FF 18.0.1 and FF 19.0. On all tree all works fine.

    stealthmode on means stealthmode activated well all leds will turn off, right?
     
  86. kthaddock

    kthaddock Network Guru Member


    Yes, stealth on=leds not lit off=leds lits.
    stealth = invisible = not lit

    kthaddock
     
  87. casula

    casula Serious Server Member

    @shibby: sorry for my ignorance :rolleyes: Thank you very much :)
     
  88. kthaddock

    kthaddock Network Guru Member

    Upnpd seems not to start in 106-aio not showing with putty and PS.
    try to start with:
    Get this errors:
    Code:
    ext_ifname=vlan10
    port=0
    enable_upnp=yes
    enable_natpmp=yes
    secure_mode=yes
    upnp_forward_chain=upnp
    upnp_nat_chain=upnp
    notify_interval=60
    system_uptime=yes
     
    clean_ruleset_interval=600
    clean_ruleset_threshold=20
    presentation_url=http://192.168.2.1:80/forward-upnp.asp
    uuid=95a096aa-dce6-4125-998d-5632964c8b94
     
    listening_ip=192.168.2.1/255.255.255.0
    allow 1024-65535 192.168.2.1/255.255.255.0 1024-65535
    listening_ip=172.30.2.1/255.255.255.192
    allow 1024-65535 172.30.2.1/255.255.255.192 1024-65535
    listening_ip=172.30.2.65/255.255.255.192
    allow 1024-65535 172.30.2.65/255.255.255.192 1024-65535
     
    deny 0-65535 0.0.0.0/0 0-65535
    
    Suggestion to temporary fix ???
     
  89. leandroong

    leandroong Addicted to LI Member

    Tomato Firmware 1.28.0000 MIPSR1-106 K26 USB Big-VPN
    root@BTRouter2:/tmp/home/root# miniupnpd -f /etc/upnp/config
    Error reading configuration file /etc/upnp/config
    Usage:
    miniupnpd [-f config_file] [-i ext_ifname] [-o ext_ip]
    [-a listening_ip] [-p port] [-d] [-U] [-S] [-N]
    [-u uuid] [-s serial] [-m model_number]
    [-t notify_interval] [-P pid_filename] [-z fiendly_name]
    [-B down up] [-w url] [-r clean_ruleset_interval]
    [-A "permission rule"]

    Notes:
    There can be one or several listening_ips.
    Notify interval is in seconds. Default is 30 seconds.
    Default pid file is '/var/run/miniupnpd.pid'.
    Default config file is '/etc/miniupnpd.conf'.
    With -d miniupnpd will run as a standard program.
    -S sets "secure" mode : clients can only add mappings to their own ip
    -U causes miniupnpd to report system uptime instead of daemon uptime.
    -N enable NAT-PMP functionality.
    -B sets bitrates reported by daemon in bits per second.
    -w sets the presentation url. Default is http address on port 80
    -A use following syntax for permission rules :
    (allow|deny) (external port range) ip/mask (internal port range)
    examples :
    "allow 1024-65535 192.168.1.0/24 1024-65535"
    "deny 0-65535 0.0.0.0/0 0-65535"
    -h prints this help and quits.
    root@BTRouter2:/tmp/home/root#
     
  90. Elfew

    Elfew Addicted to LI Member

    OK, so problem is only with google chrome... Thank you Shibby.
     
  91. Lamoboy

    Lamoboy Serious Server Member

    Shibby, please create bugtracking system on your website, so it would be a lot easier to track certain problems and feature request. Your project now has a lot of followers and one thread at forum is not enough already.
     
  92. shibby20

    shibby20 Network Guru Member

    change all netmasks to /bits. ex 255.255.255.0 to 24 and it will start.

    i`m trying to write function to convert netmask. If any of you have already working solution writen in C#, please let me know.
     
  93. kthaddock

    kthaddock Network Guru Member

    Suggestion to do that, file will be overwriten when start upnpd.
     
  94. shibby20

    shibby20 Network Guru Member

    do you see forwarded ports by upnp in GUI?
     
  95. kthaddock

    kthaddock Network Guru Member

    Well I haven't that fix working as file will be overwriten when starting upnpd
     
  96. nick ant0ny

    nick ant0ny Networkin' Nut Member

    HI,

    i have installed v106 , erased nvram everything okay. I have aproblem. When i enable https for local access i can no more login into the web interface.
     
  97. jerrm

    jerrm Network Guru Member

    May I suggest adding a description "to turn off all LEDs" to the changelog telling users what this does. Anyone not following the forum would think it is something firewall related.
     
  98. Frequenzy

    Frequenzy Networkin' Nut Member

    Hi Shibby,

    Is it ok to include this fix on the next release. Issue started when you added vlan mapping for rt-n53 on build 104

    Model Broadcom 11/0x0550/1234/0x1100/0x710
    Chipset Broadcom BCM5357 chip rev 2 pkg 8

    so if possible to include board rev 0x1100? thanks.
     
  99. kthaddock

    kthaddock Network Guru Member

    @Shibby

    When I start with modified upnp with in my case /24 and /26 network it's starting.
    I put new config in a .sh file and started. I had to turn off built in upnp in program.
    Therfore a can't tell if it's show up in "list"

    Code:
    ext_ifname=vlan10
    port=0
    enable_upnp=yes
    enable_natpmp=no
    secure_mode=yes
    upnp_forward_chain=upnp
    upnp_nat_chain=upnp
    notify_interval=60
    system_uptime=yes
     
    clean_ruleset_interval=600
    clean_ruleset_threshold=20
    presentation_url=http://192.168.2.1:80/forward-upnp.asp
    uuid=76e0b22e-51ba-4363-810f-6771b5b1bc5e
     
    listening_ip=192.168.2.1/24
    allow 1024-65535 192.168.2.1/24 1024-65535
    listening_ip=172.30.2.1/26
    allow 1024-65535 172.30.2.1/26 1024-65535
    listening_ip=172.30.2.65/26
    allow 1024-65535 172.30.2.65/26 1024-65535
     
    deny 0-65535 0.0.0.0/0 0-65535
     
  100. kthaddock

    kthaddock Network Guru Member

    Doesn't display lease time on Status overview => Remaining Lease Time => showing 0 days, 00:00:00
     

Share This Page