1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato Shibby's Releases

Discussion in 'Tomato Firmware' started by shibby20, Feb 26, 2011.

  1. molnart

    molnart Networkin' Nut Member

    @shibby - i can confirm - it doesnt
     
  2. shibby20

    shibby20 Network Guru Member

    ok, i know why. Symlink /var/log/messages is still exists. I can remove symlink after unchecking the box. Will add fix to git today.
     
  3. maurer

    maurer LI Guru Member

    i tried t 2.31 from repo shibby but when i try to start it I get:
    "/opt/bin/transmission-daemon: can't load library 'libintl.so.3'"
     
  4. shibby20

    shibby20 Network Guru Member

    install gettext package and then copy /opt/lib/libintl.so.0 to /opt/lib/libintl.so.3

    then transmission 2.31 will works.
     
  5. Toastman

    Toastman Super Moderator Staff Member Member

    Symlink /var/log/messages removal did the trick.

    I did not try the bw limiter yet, I'm trying to sort out some merge problems.
     
  6. Toastman

    Toastman Super Moderator Staff Member Member

    Tried it - checked, the bw limiter upload limits aren't working when QOS is on. Otherwise, it's almost there. I wondered about using a different chain, but have had no time to try it. Until it works with and is complementary to QOS, I will stick with the IMQ based limiter which works well.
     
  7. GhaladReam

    GhaladReam Network Guru Member

    Hey shibby,

    Just wondering if you know when we can expect the next build? Specifically, the one with Transmission 2.31 + your Big build with nothing else removed for RT-N16 users (the one that exceeds 8mb).

    Thanks!
     
  8. shibby20

    shibby20 Network Guru Member

    when? hmm maybe even today or tomorrow. They are compiling at the moment :)
     
  9. were55

    were55 Addicted to LI Member

    Bit Torrent

    Hi Shibby20,

    I'm testing your last firmware 1.28.0905 MIPSR2-053 K26 USB Mega and bit torrent client is not working anymore, I mean, I can not access GUI page :confused: Is't working for someone else?

    thanks

     
  10. GhaladReam

    GhaladReam Network Guru Member

    Confirmed. Transmission is not working in the Mega-VPN 053 build on RT-N16. I have yet to try other builds. I also cleared NVRAM thinking it may have been the problem, but still no dice. I have since flashed back to build 052 Big-BT, and Transmission immediately started working again.

    Also in the "about" screen on Mega-VPN, it still says Transmission 2.22 :)
     
  11. shibby20

    shibby20 Network Guru Member

    True, my mistake. I will fix it and release new images today.
     
  12. CBR900

    CBR900 LI Guru Member

    Can tomato-K26USB-1.28.905xRAF-EN-MIPSR1-053-Mega-VPN.trx be installed in asus wl-500gp?
     
  13. maurer

    maurer LI Guru Member

    yes, no problem.
    try it.
     
  14. shibby20

    shibby20 Network Guru Member

    @CBR900 - please wait. MEGA builds havent included BT binaries (my mistake). Im compiling right now new mega builds. I will tell you when i finish.
     
  15. GhaladReam

    GhaladReam Network Guru Member

    shibby,

    Transmission appears to be working now in your updated 053 Mega-VPN Build. However, it appears to still be Transmission 2.22, and not 2.31.. I went into the web-GUI preferences screens, and it says 2.22 (12099) in the lower left corner of them. Also still says 2.22 in the "About" screen.

    Is Transmission 2.31 not stable, or am I missing something and 2.31 is actually included? I apologize if I overlooked something.
     
  16. shibby20

    shibby20 Network Guru Member

    yes, new Mega images released. I stay in BT2.22 because 2.31 is 2x large. You can install newest transmission from optware and set "optware" as binaries path :)

    Maybe later i will make Mega version with BT2.31.

    BTW:
    [​IMG]
     
  17. molnart

    molnart Networkin' Nut Member

    It seems you did it again shibby, great work. Cant wait to get home and update. However could you please also make a MIPS2 Mini build? For MIPS2 the MiniIPv6 build is the smallest, which is still too large to fit into the WNR2000v2... Maybe you could add the busybox extras too. I was trying myself to compile a custom build, but i kinda failed

    Thanks
     
  18. shibby20

    shibby20 Network Guru Member

    done.

    i will try next time.

    its very simple :) i can help you.
     
  19. occamsrazor

    occamsrazor Network Guru Member

    Sorry for the dumb question, but am I right in saying your new 053 build is based on Victek's latest of May 29th, so that this:

    tomato-E3000USB-NVRAM60K-1.28.905xRAF-EN-MIPSR2-053-Mega-VPN.bin

    is basically this:

    Tomato RAF 1.28.9004.. Specific version for E3000, USB + Extended Sysinfo + VPN + Captive Portal. Updated MAY 29. 2011.

    ...but with added Bittorrent Client binaries and GUI?
     
  20. molnart

    molnart Networkin' Nut Member

    thank you very much for the mini build, just flashed it and it works flawlessly so far. finally i have extended sysinfo on the WNR2000v2 :)

    regarding the custom build, i was following this guide http://tomatousb.org/tut:how-to-build-and-rebuild-tomato-for-total-noobs but i couldnt find any of your builds on the git, only the builds from Toastman, Teddy Bear and some VPN builds. Secondly, i couldnt figure out how to make a custom build. I can make a preset build (like the a, b, c, d etc builds), but i have no idea how can i add/remove individual features like Busybox extras and CIFS. I think i need to edit the makefile somehow, but it was not really self-explaining...
     
  21. GhaladReam

    GhaladReam Network Guru Member

    Will be looking forward to this. You could simply name it the RT-N16 Super Mega build or something, and stress that it can only be used with it, As you know, RT-N16 is more than capable of handling such a large firmware :) Any ETA on this?
     
  22. spookyneo

    spookyneo Networkin' Nut Member

    I am interested in this as well.
     
  23. Badders44

    Badders44 LI Guru Member

    Just to say 053 is running fine here. Nice work again Shibby :)
     
  24. shibby20

    shibby20 Network Guru Member

    you welcome :)
     
  25. spookyneo

    spookyneo Networkin' Nut Member

    Is it possible that DLNA is broken in 053 ? Since I flashed to 053, I can't get my PS3 to read the media files anymore. It says DLNA error 2104 when I try to load a video from the router. Note that my videos are connected to the router using an USB external HD. It was working on RAF 8655 which was the firmware I was using before switching to shibby's 053.

    I tried deleting and rebuilding miniDLNA database, with no luck. Nothing wants to play...same settings as before and did an NVRAM clear when flashing.

    Anyone ? :(
     
  26. Badders44

    Badders44 LI Guru Member

    It's working fine for me with the settings below but the building of the database seems a little hap-hazard, especially the "Scan Media at Startup". I end up having to "Rescan on next run" to get the files visible via DLNA on my Panasonic TV. The files are on a 16GB USB memory stick connected to the router.

    DLNA.jpg

    I really need to confirm all of this though. I'll clear NVRAM and fill in the details from scratch tonight and report back.
     
  27. shibby20

    shibby20 Network Guru Member

    im not using DLNA server and i didnt change nothing in minidlna from tomato-git repository well i I see no reason why it would not work.
     
  28. baluvee

    baluvee Network Guru Member

    same here. can't get my PS3 to read the media files anymore
    ASUS RT-N16 with shibby's 053
     
  29. spookyneo

    spookyneo Networkin' Nut Member

    which firmware did you have before that was working ?
     
  30. baluvee

    baluvee Network Guru Member

    build 50
     
  31. shibby20

    shibby20 Network Guru Member

    minidlna version buildin tomato is 1.0.19. In repo of minidlna is newer version 1.0.19.3. I will include newest version and will give to test (i havent ps3 and dont use dlna).
     
  32. Badders44

    Badders44 LI Guru Member

  33. spookyneo

    spookyneo Networkin' Nut Member

  34. Badders44

    Badders44 LI Guru Member

  35. shibby20

    shibby20 Network Guru Member

    http://tomato.groov.pl/K26/testing/

    Changelog:
    - added multi-clients monitor
    - clientmon doesnt exclude users from bw limiter. User is still limiting.
    - upgrade minidlna from 1.0.19 to 1.0.19.1 (version 1.0.19.3 wont start)
    - few cosmetics changes.

    Feedback welcome.
     
  36. GhaladReam

    GhaladReam Network Guru Member

    There a Mega-VPN of this build as well?
     
  37. shibby20

    shibby20 Network Guru Member

    its only for test. If clientmon will be work correct i will release (for 2-3 days) stable versions and put sources to git repository.
     
  38. gogubeb

    gogubeb Addicted to LI Member

    Hi Shibby,
    Could you make a build with all you need to host web pages (MEGA-VPN+lighthttpd php) on USB HDD on a RT-N16?
     
  39. shibby20

    shibby20 Network Guru Member

    no :) where do you want keep ALL those settings? In nvram? Impossible.

    You can simple install lighttpd + php + mysql + phpmyadmin from optware. You only need same usb stick or usb hdd drive ;)
     
  40. gogubeb

    gogubeb Addicted to LI Member

    You have a tutorial for installing lighttpd + php + mysql + phpmyadmin?
     
  41. Badders44

    Badders44 LI Guru Member

    Hi Shibby. I've loaded the new test 054 successfully and without issue :)

    I've still got the minor problem where it is not rebuilding the DLNA database on startup when the database is on a mounted USB stick:

    Database Location Custom Path /mnt/sda1/mediadb

    From the initial reboot log you can see the DLNA message "Creating new database..."

    Code:
    Jan  1 00:00:48 Router cron.info crond[497]: crond: crond (busybox 1.18.4) started, log level 8
    Jan  1 00:00:48 Router user.notice kernel: scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
    Jan  1 00:00:48 Router user.notice kernel: sd 0:0:0:0: [sda] 31277056 512-byte hardware sectors (16014 MB)
    Jan  1 00:00:48 Router user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jan  1 00:00:48 Router user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
    Jan  1 00:00:48 Router user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
    Jan  1 00:00:48 Router user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
    Jan  1 00:00:48 Router user.info kernel:  sda: sda1
    Jan  1 00:00:48 Router user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
    Jan  1 00:00:49 Router daemon.err nmbd[526]: Samba server ROUTER is now a domain master browser for workgroup DSL01 on subnet UNICAST_SUBNET
    Jan  1 00:00:50 Router daemon.warn minidlna[532]: Starting MiniDLNA version 1.0.19.1 [SQLite 3.7.5].
    Jan  1 00:00:50 Router user.notice root: Stoping NFS Server ...
    Jan  1 00:00:50 Router user.warn kernel: fuse init (API version 7.8), DCACHE_BUG enabled
    Jan  1 00:00:50 Router daemon.warn minidlna[532]: Creating new database...
    Jan  1 00:00:51 Router user.info init[1]: Asus RT-N16: Tomato 1.28.0905 MIPSR2-054 K26 USB Mega
    Jan  1 00:00:51 Router daemon.info dnsmasq[491]: exiting on receipt of SIGTERM
    Jan  1 00:00:51 Router daemon.notice ntfs-3g[559]: Version 2011.4.12 integrated FUSE 27
    Jan  1 00:00:51 Router daemon.notice ntfs-3g[559]: Mounted /dev/sda1 (Read-Write, label "", NTFS 3.1)
    Jan  1 00:00:51 Router daemon.notice ntfs-3g[559]: Cmdline options: iocharset=utf8,noatime,nodev
    Jan  1 00:00:51 Router daemon.notice ntfs-3g[559]: Mount options: iocharset=utf8,nodev,allow_other,nonempty,noatime,fsname=/dev/sda1,blkdev,blksize=4096
    Jan  1 00:00:51 Router daemon.notice ntfs-3g[559]: Ownership and permissions disabled, configuration type 1
    Jan  1 00:00:51 Router user.info hotplug[517]: USB ntfs fs at /dev/sda1 mounted on /tmp/mnt/sda1
    Jan  1 00:00:51 Router user.notice root: Transmission daemon successfully stoped
    Jan  1 00:00:51 Router user.notice root: NFS Server stoped ...
    Jan  1 00:00:51 Router daemon.info dnsmasq[561]: started, version 2.57 cachesize 8192
    Jan  1 00:00:51 Router daemon.info dnsmasq[561]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-I18N DHCP TFTP no-IDN
    Jan  1 00:00:51 Router daemon.info dnsmasq[561]: asynchronous logging enabled, queue limit is 5 messages
    Jan  1 00:00:51 Router daemon.info dnsmasq-dhcp[561]: DHCP, IP range xxx.xxx.xxx.xxx -- xxx.xxx.xxx.xxx, lease time 1d
    Jan  1 00:00:51 Router daemon.info dnsmasq[561]: reading /etc/resolv.dnsmasq
    Jan  1 00:00:51 Router daemon.info dnsmasq[561]: using nameserver xxx.xxx.xxx.xxx#53
    Jan  1 00:00:51 Router daemon.info dnsmasq[561]: using nameserver xxx.xxx.xxx.xxx#53
    Jan  1 00:00:51 Router daemon.info dnsmasq[561]: read /etc/hosts - 2 addresses
    Jan  1 00:00:51 Router daemon.info dnsmasq[561]: read /etc/dnsmasq/hosts/hosts - 13 addresses
    Jan  1 00:00:51 Router daemon.info dnsmasq-dhcp[561]: read /etc/dnsmasq/dhcp/dhcp-hosts
    Jan  1 00:00:51 Router daemon.warn minidlna[532]: HTTP listening on port 45906
    Jan  1 00:00:52 Router user.info rcheck[597]: Time not yet set. Only "all day, everyday" restrictions will be activated.
    Jun  8 22:08:45 Router user.info ntpc[638]: Time Updated: Wed, 08 Jun 2011 22:08:45 +0100 [+1307567273s]
    Jun  8 22:08:48 Router user.notice root: CMON: stopped
    Jun  8 22:08:50 Router daemon.err nmbd[526]: Samba server ROUTER is now a domain master browser for workgroup DSL01 on subnet 192.168.44.5
    Jun  8 22:08:51 Router user.info syslog: SNet version started
    Jun  8 22:08:51 Router daemon.notice miniupnpd[1074]: Listening for NAT-PMP traffic on port 5351
    
    Is the USB stick available at that point in the boot?

    If it's built via the GUI after the router has booted it looks like this:

    Code:
    Jun  8 22:38:09 Router daemon.warn minidlna[532]: received signal 15, good-bye
    Jun  8 22:38:09 Router daemon.warn minidlna[1351]: Starting MiniDLNA version 1.0.19.1 [SQLite 3.7.5].
    Jun  8 22:38:09 Router daemon.warn minidlna[1351]: HTTP listening on port 27575
    Jun  8 22:42:57 Router daemon.warn minidlna[1351]: received signal 15, good-bye
    Jun  8 22:42:57 Router daemon.warn minidlna[1433]: Starting MiniDLNA version 1.0.19.1 [SQLite 3.7.5].
    Jun  8 22:42:57 Router daemon.warn minidlna[1433]: Creating new database...
    Jun  8 22:42:58 Router daemon.warn minidlna[1433]: HTTP listening on port 23253
    Jun  8 22:42:58 Router daemon.warn minidlna[1436]: Scanning /tmp/mnt/sda1/Pictures
    Jun  8 22:43:28 Router daemon.warn minidlna[1436]: Scanning /tmp/mnt/sda1/Pictures finished (233 files)!
    Jun  8 22:43:28 Router daemon.warn minidlna[1436]: Scanning /tmp/mnt/sda1/Videos
    Jun  8 22:44:11 Router daemon.warn minidlna[1436]: Scanning /tmp/mnt/sda1/Videos finished (260 files)!
    
    Any ideas? and thanks again - great work :thumbups:
     
  42. spookyneo

    spookyneo Networkin' Nut Member

    Are you able to check if there is still an issue with playback on the PS3 ? Sadly I can't test this firmware tonight ...
     
  43. Badders44

    Badders44 LI Guru Member

    Sorry spookyneo, I haven't got any gaming consoles.
     
  44. shibby20

    shibby20 Network Guru Member

  45. gogubeb

    gogubeb Addicted to LI Member

    Shibby, I quit playing with lighttpd + php + mysql + phpmyadmin.
     
  46. shibby20

    shibby20 Network Guru Member

  47. bolidew

    bolidew Networkin' Nut Member

    Yes please keep up with the latest version of BT client. This is the most distinguishing feature of your firmware :)

    Thanks a lot.
     
  48. gogubeb

    gogubeb Addicted to LI Member

    I tried once again and i managed, the problem for me was lighttpd.conf but i edited yours lighttpd.conf to not ask for the password when you visit the page.
    Thanks for your help.
     
  49. bolidew

    bolidew Networkin' Nut Member

    Edit out my double post, sorry I though it didn't pass the 1st time.

    Somehow this board is SLOW to refresh or it is just because of I am a "Moderated User" whatever that means :)
     
  50. GhaladReam

    GhaladReam Network Guru Member

    I don't think you need to post the same thing twice :) shibby already said before he was working on a super-mega RT-N16-only build with 2.31 in it.
     
  51. shibby20

    shibby20 Network Guru Member

    [release] build 055

    * added Clients Monitor
    * few fixes for Captive Portal
    * sd-idle checkbox in usb settings.
    * new build AIO (All-In-One) only for routers with more than 8MB flash!! At the moment only RT-N16.

    Version with BT2.31 i will release tomorrow :)
     
  52. CBR900

    CBR900 LI Guru Member

    thx alot for the great work...looking forward to flash my router with

    tomato-K26USB-1.28.905xRAF-EN-MIPSR1-055-Mega-VPN.trx

    And http://tomato.groov.pl/K26/builds.png need to be updated I guess.

    thx again
     
  53. shibby20

    shibby20 Network Guru Member

    true, i will update tomorrow :)
     
  54. spookyneo

    spookyneo Networkin' Nut Member

    shibby, which version of miniDLNA is in 055 ? Is it 1.19.3 or the latest 1.20 ?
     
  55. Badders44

    Badders44 LI Guru Member

    Code:
    Jan  1 00:00:50 Router daemon.warn minidlna[532]: Starting MiniDLNA version 1.0.19.1 [SQLite 3.7.5].
     
  56. shibby20

    shibby20 Network Guru Member

    1.0.19.1
    i have to test new 1.0.20 version. Maybe tomorrow i will have few free time.
     
  57. shibby20

    shibby20 Network Guru Member

  58. shibby20

    shibby20 Network Guru Member

  59. CBR900

    CBR900 LI Guru Member

    what are the features of AIO version compared to mega-vpn version?

    10x
     
  60. shibby20

    shibby20 Network Guru Member

  61. GhaladReam

    GhaladReam Network Guru Member

    I just had a quick question.. Why is it that even though the AIO image is 7576k, is it only suitable for the RT-N16? (i.e too big for 8MB flash models) Last time I checked 7576k is less than 8192k (8MB) so shouldn't it still fit in an 8MB flash? Is there some kind of overhead I don't know about? I have an RT-N16 so it doesn't matter either way to me, I was just curious.
     
  62. kthaddock

    kthaddock Network Guru Member

    8MB flash chip: 7995392 bytes
    7995392 bytes by my calculation is 7808k but in wnr3500l is 400kb less memory
    7808 - 400 = 7408k is max size. Latest AIO (056) is 7564k
     
  63. GhaladReam

    GhaladReam Network Guru Member

    Ah, thanks for clarifying.

    EDIT: Also, shibby, flashed your 056 test AIO build to my RT-N16. Everything seems to be running stable, including Transmission 2.31. I can't comment on minidlna though as I don't use it.

    Thanks again!
     
  64. baluvee

    baluvee Network Guru Member

    RT-N16 ASUS Tomato Firmware 1.28.0905 MIPSR2-056 K26 USB AIO
    DLNA Error on PS3
     
  65. shibby20

    shibby20 Network Guru Member

    any logs?
     
  66. GhaladReam

    GhaladReam Network Guru Member

    Just wanted to say that Transmission 2.31 in testing build 056 appears to be MUCH more stable than 2.22 was. Before, 2.22 would crash after a while if I was downloading/seeding a large (4+GB) torrent, or crash part way through, resulting me needing to restart the router. I downloaded two ~6GB torrents last night and this morning they were done and seeding like champs with no appearance that anything ever crashed.

    Quite happy :)
     
  67. Badders44

    Badders44 LI Guru Member

    Loaded 056 and the dlna seems to working correctly now for me. It rebuilds the database on startup which it wasn't doing before. No issues found so far, but I haven't done much with it. :thumbup:
     
  68. hapahopi

    hapahopi Addicted to LI Member

    shibby,
    Is Transmission 2.3 included in tomato-K26USB-1.28.0905xRAF-EN-MIPSR1-056-Mega already?
     
  69. shibby20

    shibby20 Network Guru Member

    Yes. Version from testing directory has bt2.31 :)
     
  70. baluvee

    baluvee Network Guru Member

    sorry about late reply.
    when database location is custom path then I get dlna error. if i set db path to RAM then all good
     
  71. GhaladReam

    GhaladReam Network Guru Member

    shibby, I think you should move 056 from testing to release, It's the most stable BT release so far (that i've used) :)
     
  72. shibby20

    shibby20 Network Guru Member

    GREAT!! I will push changes to git tomorrow :)
     
  73. baluvee

    baluvee Network Guru Member

    still DLNA error
     
  74. GhaladReam

    GhaladReam Network Guru Member

    What as the last version of shibby's firmware that worked? That way he knows what version of minidlna to use :)
     
  75. shibby20

    shibby20 Network Guru Member

    @baluvee - many users told me that version 1.0.18 of minidlna (is included in tomato build52) works correct with PS3. Is it true? I can compile for you version 056 with minidlna 1.0.18 for test if you want.
     
  76. spookyneo

    spookyneo Networkin' Nut Member

    Hi shibby,

    I am still experiencing issues with miniDLNA and build056 unfortunately.

    Your first build that I tried was build053 and DLNA was broken in it with my PS3. I came from an old RAF firmware (8655 if I'm not mistaken) and miniDLNA was working.

    If I remember correctly, a read a user here stating your build 050 was working with DLNA.

    If you decide to create a build for DLNA issues with a previous version of miniDLNA, I will gladly test it from my side as well.

    Thanks for the support shibby :)
     
  77. shibby20

    shibby20 Network Guru Member

    im compiling at the moment new version with fix of transmission java error and minidlna 1.0.18.2 (from build52).
     
  78. spookyneo

    spookyneo Networkin' Nut Member

    let us know as soon it's available. I should be able to test this within few hours after you released it :)

    This will be an AIO release ?
     
  79. shibby20

    shibby20 Network Guru Member

    i found few bugs well i have to compile one more time. I`ll test tomorrow and release test build (also AIO).
     
  80. baluvee

    baluvee Network Guru Member

    Appreciate it sir. I would appreciate if you can compile two version one with minidlna 1.0.20 and one with minidlna 1.0.18.2. I will test in my Friend's router
     
  81. shibby20

    shibby20 Network Guru Member

    version 057 for testing released. Changes:
    - minidlna from build52 - 1.0.18.2
    - allow set port in minidlna
    - bugfix for transmission java error

    download: http://tomato.groov.pl/K26/testing/057/

    I hope minidlna on PS3 will works :)
    feedback welcome.
     
  82. spookyneo

    spookyneo Networkin' Nut Member

    Thanks shibby. I've installed it and rescanning all my media files to be safe.

    I might not be able to test it this morning, since I have to go to work. I'll test it tonight, which is about 10-11H from now.

    By default in the GUI, the port # of miniDLNA is 0...should it be ? What is the default port of miniDLNA ?
     
  83. shibby20

    shibby20 Network Guru Member

    0 is random. I`ll add suffix in next update.

     
  84. spookyneo

    spookyneo Networkin' Nut Member

    Alright I just tried while it is rebuilding and still get a 2104 error on my PS3.

    I decided to give it a go on my X360. Totally forgot that it has a DLNA client...and everything works on my XBox. I can play my movies without any issues.

    So the issue seems to be only with the PS3...I'm starting to wonder if it is really tomato/miniDLNA or an update made to the PS3 few weeks ago.
     
  85. shibby20

    shibby20 Network Guru Member

    its true. Problem is only with PS3.
     
  86. baluvee

    baluvee Network Guru Member

    I confirm mindlna 1.20 works after couple of router restart
    my firmware is Tomato Firmware 1.28.0905 MIPSR2-056 K26 USB AIO. so please compile new AIO with latest minidlna
     
  87. spookyneo

    spookyneo Networkin' Nut Member

    Could you be more specific ? You only restarted the router few times and miniDLNA works ? Doesn't seem really stable to me ...
     
  88. baluvee

    baluvee Network Guru Member

    restarted router, rescan media share and it worked
     
  89. Badders44

    Badders44 LI Guru Member

    Just to confirm I had no minidlna problems with 056 and it was the first version to actually rebuild the database on restart as it was supposed to. So, lets not "throw the baby out with the bathwater". 056 is a good working version.
    After saying all of that, I'll give 057 AIO a go now and report back soon.
     
  90. shibby20

    shibby20 Network Guru Member

    @baluvee - version 056 has the newest minidlna 1.0.20 ;)

    Please test and decide with version of minidlna (1.0.18.2 or 1.0.20) i should leave in final build.

    If problem is only on PS3 i think its not a reason to rollback previous version. Propably newer version supports more hardware (TV etc) then older version and has more features and fixes.
    In my opinion better choise is the newest version but choise is yours.
     
  91. baluvee

    baluvee Network Guru Member

    Shibby20
    I tested my firmware is Tomato Firmware 1.28.0905 MIPSR2-056 K26 USB AIO. Minidlna works on my PS3, so I would appreciate if you can finalize new ROM with minidlna 1.0.20
     
  92. shibby20

    shibby20 Network Guru Member

    1:0 for newest version ;)
     
  93. bkmo

    bkmo LI Guru Member

    One "I don't care" my Boxee Box connects just fine via SMB shares. :) And it scans daily directly in the Transmission download folder.
     
  94. M_ars

    M_ars LI Guru Member

    shibby could you add something like a automatic rescan/rebuild of database for miniDLNA? For example, I would like that every day at 5 am the miniDLNA server starts to rebuild the database. Right now i have to do this by my self, wich is really annyoing
     
  95. spookyneo

    spookyneo Networkin' Nut Member

    hey mate,

    you can use the Scheduler in Tomato to do this...schedule a task at 5AM to rebuild the database :) you'll have to find the command line however...
     
  96. GhaladReam

    GhaladReam Network Guru Member

    Hey guys, I've been following all this miniDLNA stuff, so I decided I'd jump on the bandwagon even though I hadn't used it until now. I made a small folder of video files on my USB HDD and enabled it on my RT-N16 running build 056 AIO (the one with the 1.0.20 minidlna version). It has to build a small database first. Both my PS3 and XBOX360 are able to play the files. I actually like this feature and may start using it!

    Perhaps the reason why it wasn't working before was 1.0.20 may be incompatible with a database built with an older minidlna?, which the PS3 doesn't like, or somehow your database was corrupt before? Either way I can confirm that miniDLNA 1.0.20 in build 056 works fine on my PS3 and 360.

    I will wait for the next build to include 1.0.20 back in it :)
     
  97. baluvee

    baluvee Network Guru Member

    shibby
    would appreciate if you can put the version numbers of minidlna miniupnp in about page
     
  98. spookyneo

    spookyneo Networkin' Nut Member

    Well, maybe there's something wrong with my network config, but I can't get miniDLNA working on my PS3, either it is 1.18.2 or 1.20.

    So shibby, put back 1.20 and I'll try to figure out what's wrong on my side. If I can't find it, I'll just use my X360...lol

    Again, thanks for the support shibby :)
     
  99. shibby20

    shibby20 Network Guru Member

  100. 56kb

    56kb Addicted to LI Member

    @shibby20
    Any chance for 057-Ext
    Thanks
     

Share This Page